40-7
Route mapped configuration command
set ip next-hop <ip-address>
no set ip next-hop
Set the Next-
Hop attribute of outbound
route. The no set ip next-hop command
7. Configure EGBP Multi-Hop
If the connections with outer neighbors are not direct, the following command can configure neighbor
Multi-Hop.
neighbor {<ip-address>|<TAG>} e/jointfilesconvert/1771035/bgp-multihop
[<1-255>]
no neighbor {<ip-address>|<TAG>}
e/jointfilesconvert/1771035/bgp-multihop [<1-255>]
Configure the allowance of EBGP
connection with other networks
that are not connected directly;
the
{<ip-address>|<TAG>}
e/jointfilesconvert/1771035/bgp-multihop [<1-255>]
command cancels the setting.
8. Configure BGP session identifier
/jointfilesconvert/1771035/bgp router-id <ip-address>
no /jointfilesconvert/1771035/bgp router-id
Configure the router-id value; the
no /jointfilesconvert/1771035/bgp
router-id
command recovers the default
value.
9. Configure the BGP Version
neighbor {<ip-address> | <TAG>} version
<value>
no neighbor {<ip-address> | <TAG>} version
Set the version used by BGP
neighbors; the
{<ip-address> | <TAG>} version
setting. Presently only supporting
th
Ⅱ.Advanced BGP configuration tasks
1.Use Route Maps to Modify Route
Comments to this Manuals