Planet XGS3-24042 User Manual download pdf (Page 408)

100

101

48-7

48.2.3 PIM-DM Configuration Examples

As shown in the following figure, add the Ethernet interfaces of Switch A and Switch B to corresponding vlan,

and enable PIM-DM Protocol on each vlan interface.

Figure 48-1 PIM-DM Typical Environment

The configuration procedure for SwitchA and SwitchB is as follows:

(1) Configure SwitchA:

Switch(config)#ip pim multicast-routing

Switch(config)#interface vlan 1

Switch(Config-if-Vlan1)# ip address 10.1.1.1 255.255.255.0

Switch(Config-if-Vlan1)# ip pim dense-mode

Switch(Config-if-Vlan1)#exit

Switch(config)#interface vlan2

Switch(Config-if-Vlan2)# ip address 12.1.1.1 255.255.255.0

Switch(Config-if-Vlan2)# ip pim dense-mode

(2) Configure SwitchB:

Switch(config)#ip pim multicast-routing

Switch(config)#interface vlan 1

Switch(Config-if-Vlan1)# ip address 12.1.1.2 255.255.255.0

Switch(Config-if-Vlan1)# ip pim dense-mode

Switch(Config-if-Vlan1)#exit

Switch(config)#interface vlan 2

Switch(Config-if-Vlan2)# ip address 20.1.1.1 255.255.255.0

Switch(Config-if-Vlan2)# ip pim dense-mode

At the same time, you should pay attention to the configuration of Unicast Routing Protocol, assure that each

device can communicate with each other in the network layer, and be able to implement dynamic routing

update in virtue of Unicast Routing Protocol.

SwitchA

witch

Vlan

Vlan 1

Vlan 2

Vlan 1

1 2 ... 403 404 405 406 407 408 409 410 411 412 413 ... 720 721

Comments to this Manuals

No comments

Planet XGS3-24042 User Manual Page 408

Comments to this Manuals

Related products and manuals for Routers Planet XGS3-24042