Planet XGS3-24042 User Manual download pdf (Page 34)

100

101

2-5

2.1.3 Switch Rear Panel

The rear panel of the Managed Switch indicates an AC inlet power socket, which accept input power from 100

to 240V AC, 50-60Hz. Figure 2-1-5 shows the rear panel of these Managed Switches

XGS3-24042/24242 Rear Panel

Figure 2-1-5 Rear panel of XGS3-24042/24242

XGS3-24042/24242 Rear Panel with two 2-Port 10G SFP+ module

Figure 2-1-6 Rear panel of XGS3-24042/24242 with two 2-Port 10G SFP+ module

■ AC Power Receptacle

For compatibility with electric service in most areas of the world, the Managed Switch’s power supply

automatically adjusts to line power in the range 100-240VAC and 50/60 Hz.

Plug the female end of the power cord firmly into the receptalbe on the rear panel of the Managed Switch.

Plug the other end of the power cord into an electric service outlet then the power will be ready.

■ Connecting DC Power Supply

The XGS3 switch supports -48VDC power input, connect the power cable to the switch at the input terminal

block. Connect the power cable to the DC power supply. After power up or reset, the Managed Switch

performs a cold start procedure.

Figure 2-1-7 -48VDC connector

Power Notice:

The device is a power-required device, it means, it will not work

till it is powered. If your

networks should active all the time, please consider using UPS (Uninterrupted Power

Supply) for your device. It will prevent you from network data loss or network downtime.

In some area, installing a surge suppression device may also help to protect your Managed

Switch from being damaged by unregulated surge or current to the Switch or the power

adapter.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 720 721

Comments to this Manuals

No comments

Planet XGS3-24042 User Manual Page 34

Comments to this Manuals

Related products and manuals for Routers Planet XGS3-24042