7-3
rate-violation <200-2000000>
[recovery <0-86400>|]
no rate-violation
Set the max packet reception rate of a port. If
the rate of the received pack
packet reception rate, shut down this port and
configure the recovery time, the default is
300s.
The no command will disable the
rate-violation function of a port.
port-rate-statistics interval [<interval
Configure the interval of port-rate-statistics.
3. Virtual cable test
Test virtual cables of the port.
7.3 Port Configuration Example
Figure 7-1 Port Configuration Example
No VLAN has been configured in the switches, default VLAN1 is used.
Ingress bandwidth limit: 50 M
100Mbps full, mirror source port
1000Mbps full, mirror destination port
Comments to this Manuals