22-34
via DHCPv6
(15) Set the flag representing whether the address information will be obtained via DHCPv6
3. IPv6 Tunnel configuration
(1) Create/Delete Tunnel
(2) Configure tunnel description
(3) Configure Tunnel Source
(4) Configure Tunnel Destination
(5) Configure Tunnel Next-Hop
(6) Configure Tunnel Mode
(7) Configure Tunnel Routing
1. IPv6 Basic Configuration
(1) Configure interface IPv6 address
Interface Configuration Mode
ipv6 address <ipv6-address/prefix-length>
[eui-64]
no ipv6 address
<ipv6-address/prefix-length>
Configure IPv6 address, including
aggregatable global unicast addresses,
site-local addresses and link-local
addresses. The no ipv6 address
<ipv6-address/prefix-length> command
(2) Set IPv6 Static Routing
ipv6 route <ipv6-prefix/prefix-length>
{<nexthop-ipv6-address>|<interface-type
interface-number> |
{<nexthop-ipv6-address> <interface-type
interface-number>}} [distance]
no ipv6 route <ipv6-prefix/prefix-length>
{<nexthop-ipv6-address>|<interface-type
interface-number>
|{<nexthop-ipv6-address> <interface-type
interface-number>}} [distance]
Configure IPv6 static routing. The no
command cancels IPv6 static routing.
2. IPv6 Neighbor Discovery Configuration
(1) Configure DAD Neighbor solicitation Message number
Interface Configuration Mode
ipv6 nd dad attempts <value>
Set the neighbor query message number
sent in sequence when the interface
Comments to this Manuals