14-6
no ethernet-oam remote-failure
(failure means critical-event or link-fault
event of the local), no command disables the
ethernet-oam errored-symbol-period
threshold high {high-symbols | none}
no ethernet-oam errored-symbol-period
Configure the high threshold of errored
symbol period event, no command restores
the default value. (optional)
ethernet-oam errored-frame-period
threshold high {high-frames | none}
no ethernet-oam errored-frame-period
Configure the high threshold of errored frame
period event, no command restores the
default value. (optional)
ethernet-oam errored-frame threshold
high {high-frames | none}
no ethernet-oam errored-frame threshold
Configure the high threshold of errored frame
event, no command restores the default
value. (optional)
ethernet-oam errored-frame-seconds
threshold high {high-frame-seconds |
none}
no ethernet-oam errored-frame-seconds
Configure the high threshold of errored frame
seconds event, no command restores the
default value. (optional)
4. Enable EFM OAM loopback of port
ethernet-oam remote-loopback
no ethernet-oam remote-loopback
Enable remote EFM OAM entity to enter OAM
loopback mode (its peer needs to configure
OAM loopback supporting), no command
cancels remote OAM loopback.
ethernet-oam remote-loopback supported
no ethernet-oam remote-loopback
Enable remote loopback supporting of port,
no command cancels remote loopback
14.3 EFM OAM Example
Example:
CE and PE devices with point-to-point link enable EFM OAM to monitor “the First Mile” link performance. It will
report the log information to network management system when occurring fault event and use remote
loopback function to detect the link in necessary instance
Comments to this Manuals