81-52
P(config)# interface loopback 1
P(config-if-Loopback1)# ip address 172.3.3.3 255.255.255.255
P(config-if-Loopback1)# exit
P(config)#interface vlan 100
P(config-if-Vlan100)#ip address 100.1.1.2 255.255.255.0
P(config-if-Vlan100)#label-switching
P(config-if-Vlan100)#ldp enable
P(config-if-Vlan100)#exit
P(config)#interface vlan200
P(config-if-Vlan200)#ip address 200.1.1.2 255.255.255.0
P(config-if-Vlan200)#label-switching
P(config-if-Vlan200)#ldp enable
P(config-if-Vlan200)#exit
(2) Configure OSPF
P(config)#router ospf
P(config-router)# ospf router-id 172.3.3.3
P(config-router)# network 0.0.0.0/0 area 0
P(config-router)# redistribute connected
81.3.4 Create BGP MPLS VPN between PE-CE via Static Routes
Figure 81-11 Create BGP MPLS VPN between PE-CE via Static Routes
192.168.1.1/24
192.168.2.1/24
172.2.2.2/3
10.1.1.1/24
10.1.1.2/24
10.2.1.2/24
10.2.1.1/24
RT:100:2
AS 65002
100.1.1.1/24
100.1.1.2/24
200.1.1.2/24
172.3.3.3/32
MPLS backbone
200.1.1.1/24
10.3.1.1/24
VPN-A RT:100:1
RT:100:2
AS 65004
10.4.1.2/24
10.4.1.1/24
PE-
Routes
172.1.1.1/3
Comments to this Manuals