Planet BSP-300 User Manual

Industrial Solar Power PoE SwitchBSP-300Quick Installation Guide

10Step 5. Connect other deviceEthernet ExtenderDC12(1) Connect any other network device to Port 3 of BSP-300.(2) If there is device require DC po

11Further InformationFor more information about this Solar Power PoE Switch, please refer to the user manual from the supplied CD-ROM.

Safety PrecautionsPlease read before using1. All electrical work must be done in accordance with local, and/or international electrical cod

Table of Contents1. Package Contents ... 42. Overview ...

41. Package Contents1 x BSP-300 l1 x Quick Installation Guide l1 x RS232 Console Cable l1 x CD l2 x Rack Ear l1 x Screw Kit l

52. Overview1PV In23+-Bat. In/OutRS-23212Link/ACTLink/ACT1000DOGNDGND+24VPoE In Use+-FAULT SYSTEMBSP-300PV InBattery In / OutRJ-45 type RS-232 Console

63. Hardware InstallationBSP-300ORLong-range WirelessBackhaul/BridgeWireless CPE/APOutdoor IP CameraORLaptopLocal ConsoleDCDCSolar PVBatteryPoE1000Bas

7Step 2. Install batteryBatteryDCDC12Bat. In/Out(1) Connect the negative electrode of the battery to the terminal for the negative electrode of the b

8Step 3. Install PV panelSolar PVDCDC12PV In(1) Connect the negative electrode of the PV panel to the terminal for the negative electrode

9Step 4. Connect 8023af / 802.3at PoE Device802.3af/at PoE DevicePoEPoE12(1) Connect the PoE devices to Port 1 / Port 2 of the BSP-300.(2) Check th