Planet XGS3-24042 User Manual Page 538

  • Download
  • Add to my manuals
  • Print
  • Page
    / 721
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 537
53-5
SWTICH B can get the MAC, ARP, ND list entries of all the PC, so limiting the MAC, ARP list entry can avoid
DOS attack to a certain extent. When malicious users frequently do MAC, ARP cheating, it will be easy for
them to fill the MAC, ARP list entries of the switch, causing successful DOS attacks. Limiting the MAC, ARP,
ND list entry can prevent DOS attack.
On port 1/0/1 of SWITCH A, set the max number can be learnt of dynamic MAC address as 20, dynamic ARP
address as 20, NEIGHBOR list entry as 10. In VLAN 1, set the max number of dynamic MAC address as 30,
of dynamic ARP address as 30, NEIGHBOR list entry as 20.
SWITCH A configuration task sequence:
Switch (config)#interface ethernet 1/0/1
Switch (Config-If-Ethernet1/0/1)#switchport mac-address dynamic maximum 20
Switch (Config-If-Ethernet1/0/1)#switchport arp dynamic maximum 20
Switch (Config-If-Ethernet1/0/1)#switchport nd dynamic maximum 10
Switch (Config-if-Vlan1)#vlan mac-address dynamic maximum 30
53.4 The Number Limitation Function of Port, MAC in VLAN and
IP Troubleshooting Help
The number limitation function of MAC and IP in Port, VLAN is disabled by default, if users need to limit the
number of user accessing the network, they can enable it. If the number limitation function of MAC address
can not be configured, please check whether Spanning-tree, dot1x, TRUNK is running on the switch and
whether the port is configured as a MAC-binding port. The number limitation function of MAC address is
mutually exclusive to these configurations, so if the users need to enable the number limitation function of
MAC address on the port, they should check these functions mentioned above on this port are disabled.
If all the configurations are normal, after enabling the number limitation function of MAC and IP in Port, VLAN,
users can use debug commands to debug every limitation, check the details of number limitations and judge
whether the number limitation function is correct. If there is any problem, please sent result to technical
service center.
Page view 537
1 2 ... 533 534 535 536 537 538 539 540 541 542 543 ... 720 721

Comments to this Manuals

No comments