48-17
48.4.3.2 Enabling MSDP
MSDP should be enabled before various MSDP functions can be configured.
1. Enable the MSDP function
2. Configure MSDP
1. Enabling MSDP
Global Configuration Mode
router msdp
To enable MSDP. The no form of this
command will disable MSDP globally.
2. Configuration of MSDP parameters
connect-source <interface-type>
<interface-number>
no connect-source
To configure the Connect-Source interface for
MSDP Peer. The no form of this command
will remove the configured Connect-Source
default-rpf-peer <peer-address> [ rp-policy
<acl-list-number> | <word> ]
To configure static RPF Peer. The no form of
this command will
remove the configured
RPF Peer.
originating-rp <interface-type>
<interface-number>
To configure Originator-
this command will remove the configured
ttl-threshold <ttl>
no ttl-threshold
To configure the TTL value. The no form of
this command will remove the configured TTL
48.4.4 Configuration of MSDP Entities
48.4.4.1 Creation of MSDP Peer
peer <peer-address>
no peer <peer-address>
To create a MSDP Peer. The no form of this
command will remove the configured MSDP
Comments to this Manuals