Planet XGS3-24042 User Manual download pdf (Page 541)

100

101

54-3

54.3 AM Function Example

Figure

54-1 a typical configuration example of AM function

In the topology above, 30 PCs, after converged by HUB1, connect with interface1 on the switch. The IP

addresses of these 30 PCs range from 100.10.10.1 to 100.10.10.30. Considering security, the system

manager will only take user with an IP address within that range as legal ones. And the switch will only

forward data packets from legal users while dumping packets from other users.

According to the requirements mentioned above, the switch can be configured as follows:

Switch(config)#am enable

Switch(config)#interface ethernet1/0/1

Switch(Config-If-Ethernet1/0/1)#am port

Switch(Config-If-Ethernet1/0/1)#am ip-pool 10.10.10.1 10

54.4 AM Function Troubleshooting

AM function is disabled by default, and after it is enabled, relative configuration of AM can be made.

Users can view the current AM configuration with “show am” command, such as whether the AM is enabled or

not, and AM information on each interface, they can also use “show am [interface <interface-name>]”

command to check the AM configuration information on a specific interface.

If any operational error happens, the system will display detailed corresponding prompt.

PC1

………

PC2

PC30

HUB1

HUB2

Internet

Port1

Port2

SWITCH

1 2 ... 536 537 538 539 540 541 542 543 544 545 546 ... 720 721

Comments to this Manuals

No comments

Planet XGS3-24042 User Manual Page 541

Comments to this Manuals

Related products and manuals for Routers Planet XGS3-24042