Planet XGS3-24042 User Manual download pdf (Page 532)

100

101

52-18

Switch(config)#interface vlan 1

Switch(Config-if-vlan1)#ip address 10.1.1.2 255.255.255.0

Switch(Config-if-vlan1)#exit

Switch(config)#radius-server authentication host 10.1.1.3

Switch(config)#radius-server accounting host 10.1.1.3

Switch(config)#radius-server key test

Switch(config)#aaa enable

Switch(config)#aaa-accounting enable

Switch(config)#dot1x enable

Switch(config)#interface ethernet 1/0/2

Switch(Config-If-Ethernet1/0/2)#dot1x enable

Switch(Config-If-Ethernet1/0/2)#dot1x port-control auto

Switch(Config-If-Ethernet1/0/2)#exit

52.3.3 Examples of IPv6 Radius Application

Figure

52-17 IPv6 Radius

Connect the computer to the interface 1/0/2 of the switch, and enable IEEE802.1x on interface1/0/2. Use

MAC based authentication. Configure the IP address of the switch as 2004:1:2:3::2, and connect the switch

with any interface except interface 1/0/2 to the RADIUS authentication server. Configure the IP address of the

RADIUS server to be 2004:1:2:3::3. Use the default ports 1812 and 1813 for authentication and accounting

respectively. Install the IEEE802.1x authentication client software on the computer, and use the client for

IEEE802.1x authentication.

The detailed configurations are listed as below:

Switch(config)#interface vlan 1

Switch(Config-if-vlan1)#ipv6 address 2004:1:2:3::2/64

Switch(Config-if-vlan1)#exit

2004:1:2:3::1

2004:1:2:3::2

Radius Server

2004:1:2:3::3

1 2 ... 527 528 529 530 531 532 533 534 535 536 537 ... 720 721

Comments to this Manuals

No comments

Planet XGS3-24042 User Manual Page 532

Comments to this Manuals

Related products and manuals for Routers Planet XGS3-24042