30-3
(2)To configure parameter of DHCPv6 address pool
DHCPv6 address pool Configuration
network-address
<ipv6-pool-start-address>
{<ipv6-pool-end-address> |
<prefix-length>} [eui-64]
To configure the range of IPv6 address
assignable of address pool.
dns-server <ipv6-address>
no dns-server <ipv6-address>
To configure DNS server address for
DHCPv6 client.
domain-name <domain-name>
no domain-name <domain-name>
To configure DHCPv6 client domain name.
excluded-address <ipv6-address>
no excluded-address <ipv6-address>
To exclude IPv6 address which isn’t used for
dynamic assignment in address pool.
lifetime {<valid-time> | infinity}
{<preferred-time> | infinity}
To configure valid time or preferred time of
DHCPv6 address pool.
3. To enable DHCPv6 server function on port.
Interface Configuration Mode
ipv6 dhcp server <poolname>
[preference <value>] [rapid-commit]
[allow-hint]
no ipv6 dhcp server <poolname>
To enable DHCPv6 server function on
specified port, and binding the used
DHCPv6 address pool.
30.3 DHCPv6 Relay Delegation Configuration
DHCPv6 relay delegation configuration task list as below:
1. To enable/disable DHCPv6 service
2. To configure DHCPv6 relay delegation on port
1. To enable DHCPv6 service
service dhcpv6
To enableDHCPv6 service.
2. To configure DHCPv6 relay delegation on port
Comments to this Manuals