12-4
2. Add physical ports to the port group
port-group <port-group-number> mode
{active | passive | on}
Add the ports to the port group and set their
mode.
3. Enter port-channel configuration mode.
interface port-channel
Enter port-channel configuration mode.
4. Set load-balance method for Port-group
Aggregation port configuration mode
load-balance {dst-src-mac | dst-src-ip |
dst-src-mac-ip}
Set load-balance for switch, it takes effect
on port-group and ECMP function at the
5. Set the system priority of LACP protocol
lacp system-priority <system-priority>
Set the system priority of LACP protocol,
the no command restores the default value.
6. Set the port priority of the current port in LACP protocol
lacp port-priority <port-priority>
Set the port priority in LACP protocol. The
no command restores the default value.
7. Set the timeout mode of the current port in LACP protocol
lacp timeout {short | long}
Set the timeout mode in LACP protocol. The
no command restores the default value.
Comments to this Manuals