39-6
IPv6 ospf transit-delay <time>
[instance-id <id>]
no IPv6 ospf transit-delay
Sets the delay time before sending link-state
broadcast; the “no IPv6 ospf transit-delay
[instance-id <id>]
” command restores the
default setting.
IPv6 ospf retransmit <time>
[instance-id <id>]
no IPv6 ospf retransmit [instance-id
.Sets the interval for retransmission of link-state
advertisement among neighbor layer3 switches;
the “no IPv6 ospf retransmit [instance-id
<id>]” command restores the default setting.
(2)Configure OSPFv3 route introduction parameters
Configure OSPFv3 route introduction parameters
[no]redistribute {kernel |connected|
static| rip| isis| /jointfilesconvert/1771035/bgp} [metric<value>]
[metric-type {1|2}][route-map<word>]
Introduces other protocol discovery routing
and static routing regarded as external
routing message. The [no] redistribute
{kernel |connected| static| rip| isis| /jointfilesconvert/1771035/bgp}
[metric<value>] [metric-type
{1|2}][route-map<word>] command
cancels imported external routing message.
(3)Configure OSPFv3 importing the routes of other OSPFv3 processes
1)Enable the function of OSPFv3 importing the routes of other OSPFv3 processes
redistribute ospf [<process-id>]
[metric<value>] [metric-type
{1|2}][route-map<word>]
no redistribute ospf [<process-id>]
[metric<value>] [metric-type
Enable or disable the function of OSPFv3
importing the routes of other OSPFv3
processes.
2)Display relative information
Admin Mode or Configure Mode
show ipv6 ospf [<process-id>]
redistribute
Display the configuration information of the
OSPFv3 proces
s importing other outside
routes.
3)Debug
Comments to this Manuals