17-6
spanning-tree format standard
spanning-tree format privacy
spanning-tree format auto
no spanning-tree format
Configure the format of port
spanning-tree packet,standard format
is provided by IEEE,
compatible
with CISCO and auto
means the format is determined by
checking the received packet.
7. Configure the spanning-tree attribute of port
spanning-tree cost
Set the port path cost.
spanning-tree port-priority
no spanning-tree port-priority
Set the port priority.
spanning-tree rootguard
no spanning-tree rootguard
Set the port is root port.
spanning-tree transmit-hold-count
<tx-hold-count-value>
no spanning-tree transmit-hold-count
Set the max transmit-hold-count of
port.
8. Configure the snooping attribute of authentication key
spanning-tree digest-snooping
no spanning-tree digest-snooping
Set the port to use the authentication
string of partner port. The no restores
to use the generated string.
9. Configure the FLUSH mode once topology changes
spanning-tree tcflush {enable| disable|
protect}
no spanning-tree tcflush
Enable: the spanning-tree flush once
the topology changes.
Disable: the spanning tree don’t flush
when the topology changes.
Protect: the spanning-
tree flush not
more than one time every ten
seconds.
The no command restores to default
setting, enable flush once the
Comments to this Manuals