Planet XGS3-24042 User Manual Page 142

  • Download
  • Add to my manuals
  • Print
  • Page
    / 721
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 141
15-19
For example, M at E1/0/1 of SwitchA, then the configuration procedures are as follows:
Switch A, Switch B, Switch C:
SwitchA (Config)#mac-vlan mac 00-03 -0f-11-22-33 vlan 100 priority 0
SwitchA (Config)#interface ethernet 1/0/1
SwitchA (Config-Ethernet1/0/1)# swportport mode hybrid
SwitchA (Config-Ethernet1/0/1)# swportport hybrid allowed vlan 100 untagged
SwitchB (Config)#mac-vlan mac 00-30-4f-11-22-33 vlan 100 priority 0
SwitchB (Config)#exit
SwitchB#
SwitchC (Config)#mac-vlan mac 00-30-4f-11-22-33 vlan 100 priority 0
SwitchC (Config)#exit
SwitchC#
15.5.4 Dynamic VLAN Troubleshooting
On the switch configured with dynamic VLAN, if the two connected equipment (e.g. PC) are both
belongs to the same dynamic VLAN, first communication between the two equipments may not go
through. The solution will be letting the two equipments positively send data packet to the switch (such
as ping), to let the switch learn their source MAC, then the two equipments will be able to communicate
freely within the dynamic VLAN.
Figure 15-9 Dynamic VLAN Troubleshooting
Priority of dynamic vlan and vlan ingress filtering for processing packets is: dynamic vlan> vlan ingress
filtering
192.168.1.100/24
192.168.1.200/24
Ping 192.168.1.100
Ping 192.168.1.200
Dynamic VLAN
Page view 141
1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 720 721

Comments to this Manuals

No comments