Planet WGSW-50040 User Manual download pdf (Page 96)

100

101

Sets the cable types supported by the Ethernet port; the “no mdi” command sets the cable type to

auto-identification. This command is not supported on combo ports and fiber ports.

Parameters:

auto indicates auto identification of cable types;

across indicates crossover cable support only;

normal indicates straight-through cable support only.

Command mode:

Port Mode.

Default:

Port cable type is set to auto-identification by default.

Usage Guide:

Auto-identification is recommended. Generally, straight-through cable is used for switch-PC

connection and crossover cable is used for switch-switch connection.

Example:

Setting the cable type support of Ethernet ports 1/1-8 to straight-through cable only.

Switch(config)#interface ethernet 1/1-8

Switch(Config-Port-Range)#mdi normal

3.1.8 name

Command:

name <string>

no name

Function:

Set name for specified port; the “no name” command cancels this configuration.

Parameter:

<string> is a character string, which should not exceeds 32 characters.

Command Mode:

Port Mode.

Default:

No port name by default.

Usage Guide:

This command is for helping the user manage switches, such as the user assign names according

to the port application, e.g. financial as the name of 1/1-2 ports which is used by financial

department, engineering as the name of 1/9 ports which belongs to the engineering department,

while the name of 1/12 ports is assigned with Server, which is because they connected to the server.

In this way the port distribution state will be brought to the table.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 436 437

Comments to this Manuals

No comments

Planet WGSW-50040 User Manual Page 96

Comments to this Manuals

Related products and manuals for Routers Planet WGSW-50040