word is the specified vrf name.
Command mode:
Admin Mode
Usage Guide:
Displays the content of current ARP table such as IP address, MAC address, hardware type,
interface name, etc.
Example:
Switch#show arp
ARP Unicast Items: 7, Valid: 7, Matched: 7, Verifying: 0, Incomplete: 0, Failed: 0, None: 0
Address Hardware Addr Interface Port Flag
50.1.1.6 00-0a-eb-51-51-38 Vlan50 Ethernet1/11 Dynamic
50.1.1.9 00-00-00-00-00-09 Vlan50 Ethernet1/1 Static
150.1.1.2 00-00-58-fc-48-9f Vlan150 Ethernet1/4 Dynamic
Total number of ARP entries.
Valid ARP entry number matching the filter conditions and
attributing the legality states.
ARP entry number matching the filter conditions.
ARP entry number at verifying again validity for ARP.
InCompleted ARP entry number have ARP request sent without
ARP entry number at failed state.
ARP entry number at begin-found state.
IP address of ARP entries.
MAC address of ARP entries.
Layer 3 interface corresponding to the ARP entry.
Physical (Layer2) port corresponding to the ARP entry.
Describes whether ARP entry is dynamic or static.
12.3.5 show arp traffic
Command:
show arp traffic
Function:
Display the statistic information of ARP messages of the switch. For box switches, this command
will only show statistics of APP messages received and sent from the current boardcard.
Comments to this Manuals