Planet WGSW-50040 User Manual download pdf (Page 44)

100

101

Example:

Switch#terminal monitor

1.2.9 telnet

Command:

telnet {<ip-addr> | <ipv6-addr> | host <hostname>} [<port>]

Function:

Log on the remote host by Telnet

Parameter:

<ip-addr> is the IP address of the remote host, shown in dotted decimal notation;

<ipv6-addr> is the IPv6 address of the remote host;

<hostname> is the name of the remote host, containing max 30 characters;

<port> is the port number, ranging between 0~65535.

Command Mode:

Admin Mode.

Usage Guide:

This command is used when the switch is applied as Telnet client, for logging on remote host to

configure. When a switch is applied as a Telnet client, it can only establish one TCP connection with

the remote host. To connect to another remote host, the current TCP connection must be

disconnected with a hotkey “CTRL+ \”. To telnet a host name, mapping relationship between the

host name and the IP/IPv6 address should be previously configured. For required commands

please refer to ip host and ipv6 host. In case a host corresponds to both an IPv4 and an IPv6

addresses, the IPv6 should be preferred when telneting this host name.

Example:

The switch Telnets to a remote host whose IP address is 20.1.1.1.

Switch#telnet 20.1.1.1 23

Connecting Host 20.1.1.1 Port 23

Service port is 23

Connected to 20.1.1.1

password:***

WGSW-50040>

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 436 437

Comments to this Manuals

No comments

Planet WGSW-50040 User Manual Page 44

Comments to this Manuals

Related products and manuals for Routers Planet WGSW-50040