Planet WGSW-50040 User Manual download pdf (Page 400)

100

101

Configure the primary of MRPP ring 4000 to Ethernet 1/1.

Switch(Config)#interface ethernet 1/1

Switch(config-If-Ethernet1/1)#mrpp ring 4000 primary-port

28.10 mrpp ring secondary-port

Command:

mrpp ring < ring-id > secondary-port

no mrpp ring < ring-id > secondary-port

Function:

Specify secondary of MRPP ring.

Parameter:

<ring-id> is the ID of MRPP ring, range is <1-4096>.

Command Mode:

Port mode

Usage Guide:

The command specifies secondary port of MRPP ring. The primary node uses secondary port to

receive Hello packet from primary node. There are no difference on function between primary port

and secondary of secondary node.

The mrpp enable command must be enabled before the control-vlan command be used. If primary

port, secondary port, node-mode and enable commands all be configured after control-vlan, then the

mrpp-ring function is enabled.

Example:

Configure secondary port of MRPP ring to 1/3.

Switch(config)#interface ethernet1/3

Switch(Config-If-Ethernet1/3)#mrpp ring 4000 secondary-port

28.11 node-mode

Command:

node-mode {maser | transit}

Function:

Configure the type of the node to primary node or secondary node.

1 2 ... 395 396 397 398 399 400 401 402 403 404 405 ... 436 437

Comments to this Manuals

No comments

Planet WGSW-50040 User Manual Page 400

Comments to this Manuals

Related products and manuals for Routers Planet WGSW-50040