Planet WGSW-50040 User Manual download pdf (Page 343)

100

101

Commands for Security Function Chapter 6 Commands for TACACS+

Usage Guide:

The dot1x address filter function is implemented according to the MAC address filter table, dot1x

address filter table is manually added or deleted by the user. When a port is specified in adding a

dot1x address filter table entry, that entry applies to the port only; when no port is specified, the

entry applies to all ports in the switch. When dot1x address filter function is enabled, the switch will

filter the authentication user by the MAC address. Only the authentication request initialed by the

users in the dot1x address filter table will be accepted, the rest will be rejected.

Example:

Adding MAC address 00-01-34-34-2e-0a to the filter table of Ethernet 1/5.

Switch(config)#dot1x accept-mac 00-01-34-34-2e-0a interface ethernet 1/5

22.6 dot1x eapor enable

Command:

dot1x eapor enable

no dot1x eapor enable

Function:

Enables the EAP relay authentication function in the switch; the “no dot1x eapor enable” command

sets EAP local end authentication.

Command mode:

Global Mode.

Default:

EAP relay authentication is used by default.

Usage Guide:

The switch and RADIUS may be connected via Ethernet or PPP. If an Ethernet connection exists

between the switch and RADIUS server, the switch needs to authenticate the user by EAP relay

(EAPoR authentication); if the switch connects to the RADIUS server by PPP, the switch will use

EAP local end authentication (CHAP authentication). The switch should use different authentication

methods according to the connection between the switch and the authentication server.

Example:

Setting EAP local end authentication for the switch.

Switch(config)#no dot1x eapor enable

1 2 ... 338 339 340 341 342 343 344 345 346 347 348 ... 436 437

Comments to this Manuals

No comments

Planet WGSW-50040 User Manual Page 343

Comments to this Manuals

Related products and manuals for Routers Planet WGSW-50040