Planet WGSW-50040 User Manual download pdf (Page 244)

100

101

Commands for Security Function Chapter 6 Commands for TACACS+

Configures the Domain name for DHCP clients; the “no domain-name” command deletes the

domain name.

Parameters:

<domain> is the domain name, up to 255 characters are allowed.

Command Mode:

DHCP Address Pool Mode

Usage Guide:

Specifies a domain name for the client.

Example:

Specifying “digitalchina.com.cn" as the DHCP clients’ domain name.

Switch(dhcp-1-config)#domain-name digitalchina.com.cn

15.1.10 hardware-address

Command:

hardware-address <hardware-address> [{Ethernet | IEEE802|<type-number>}]

no hardware-address

Function:

Specifies the hardware address of the user when binding address manually; the “no

hardware-address” command deletes the setting.

Parameters:

<hardware-address> is the hardware address in Hex;

Ethernet | IEEE802 is the Ethernet protocol type,

<type-number> should be the RFC number defined for protocol types, from 1 to 255, e.g., 0 for

Ethernet and 6 for IEEE 802.

Default:

The default protocol type is Ethernet,

Command Mode:

DHCP Address Pool Mode

Usage Guide:

This command is used with the “host” when binding address manually. If the requesting client

hardware address matches the specified hardware address, the DHCP server assigns the IP

address defined in “host” command to the client.

Example:

Specify IP address 10.1.128.160 to be bound to the user with hardware address 00-00-e2-3a-26-04

in manual address binding.

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 436 437

Comments to this Manuals

No comments

Planet WGSW-50040 User Manual Page 244

Comments to this Manuals

Related products and manuals for Routers Planet WGSW-50040