Planet ADW-4401 User Manual download pdf (Page 29)

The following table describes the parameters of this page:

Field Description

PVC Settings

VPI: Virtual Path Identifier (VPI) is the virtual path between two

points in an ATM network, ranging from 0 to 255.

VCI: Virtual Channel Identifier (VCI) is the virtual channel between

two points in an ATM network, ranging from 32 to 65535 (0 to 31 is

reserved for local management of ATM traffic).

Encapsulation

Select the method of encapsulation provided by your ISP. You can

select LLC/SNAP or VC-Mux.

Channel

Mode

Select the WAN connection type. You can select 1483 Bridged, 1483

MER, PPP over Ethernet (PPPoE), PPP over ATM (PPPoA), or 1483

Routed. In this example, PPPoE is selected.

PPP Settings

Enter the username and password for PPP dial-up, which are provided

by your ISP.

Default Route You can select Enable or Disable.

DNS Settings

Obtain DNS Automatically: IP address is assigned by the office

end automatically. You need not to enter the IP address.

Use the following DNS server address: If you want to enter the

DNS server address manually, select it and enter the IP addresses

of primary DNS and secondary DNS.

After finishing the configuration, click NEXT. The page shown in the following figure

appears.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 83 84

No comments

Planet ADW-4401 User Manual Page 29