Planet ADW-4401 User Manual download pdf (Page 27)

1483 MER

In the Setup WAN Interface page, enter the correct PVC, set the channel mode to 1483

MER.

The following table describes the parameters of this page:

Field Description

PVC Settin

l Path Identifier (VPI) is the virtual path between two

points in an ATM network, ranging from 0 to 255.

VCI: Virtual Channel Identifier (VCI) is the virtual channel between

VPI: Virtua

two points in an ATM network, ranging from 32 to 65535 (0 to 31 is

reserved for local management of ATM traffic).

Encapsulation

Select the method of encapsulation provided by your ISP. You can

select LLC/SNAP or VC-Mux.

Channel

Mode

Select the WAN connection type. You can select 1483 Bridged, 1483

MER, PPP over Ethernet (PPPoE), PPP over ATM (PPPoA), or 1483

Routed. In this example, 1483 MER is selected.

Default Route You can select Enable or Disable.

DNS Settings

ssigned by the office Obtain DNS Automatically: IP address is a

end automatically. You need not to enter the IP address.

Use the following DNS server address: If you want to enter the

DNS server address manually, select it and enter the IP addresses of

primary DNS and secondary DNS.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 83 84

No comments

Planet ADW-4401 User Manual Page 27