Planet ADW-4401 User Manual download pdf (Page 47)

Use 802.1x Authentication:

Enable 802.1x Authentication and select WEP 64bits or WEP 128bits for authentication.

Following is a description of the different options:

Field Description

Radius Port

Enter the port number of the authentication server. The default

port number is 1812.

Radius Server IP Address Enter the IP Address of the authentication server.

Radius Password Enter the same key as the Radius server’s.

Click "Apply Changes" again to save the wireless security options and make the change

take effect.

- WPA(TKIP) / WPA (AES) / WPA (TKIP) / WPA2(AES):

Wi-Fi Protected Access encrypts data frames before transmitting over the wireless network.

Following is a description of the different options:

Field Description

WPA Authentication Mode Select the Enterprise (RADIUS) or Personal (Pre-Shared Key).

Pre-shared Key Format Select the Passphrase or Hax format.

Pre-shared Key

Enter the pre-shared key for WPA. Client stations must use the

same key in order to connect with this device. Check the table

below for instructions when entering the key.

Radius Port

Enter the port number of the authentication server. The default port

number is 1812.

Radius Password Enter the same key as the Radius server’s.

Channel

The channel will adjust according to nations to adapt to each

nation's frequency provision.

Channel Number

Select the appropriate channel to correspond with your network

settings. Auto is the default setting. All devices in your wireless

network must use the same channel in order to function correctly.

Radio Power 10%, 25%, 50%, 80%, 100%.

Associated Clients Click it to show Active Clients.

Click "Apply Changes" again to save the wireless security options and make the change

take effect.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 83 84

No comments

Planet ADW-4401 User Manual Page 47