Planet ADW-4401 User Manual download pdf (Page 30)

1483 Routed

In the Setup WAN Interface page, enter the correct PVC, set the channel mode to 1483

Routed.

The following table describes the parameters of this page:

Field Description

PVC Settings

VPI: Virtual Path Identifier (VPI) is the virtual path between

two points in an ATM network, and its valid value is from 0 to

255.

VCI: Virtual Channel Identifier (VCI) is the virtual channel

between two points in an ATM network, ranging from 32 to

65535 (0 to 31 is reserved for local management of ATM

traffic).

Encapsulation

Select the method of encapsulation provided by your ISP. You

can select LLC/SNAP or VC-Mux.

Channel Mode

Select the WAN connection type. You can select 1483 Bridged,

1483 MER, PPP over Ethernet (PPPoE), PPP over ATM

(PPPoA), or 1483 Routed. In this example, 1483 Routed is

selected.

WAN IP Settings

Obtain an IP address automatically: Obtain the DNS

server assigned by the uplink equipment, such as BAS.

Use the following IP address: Enter the static IP address

provided by your ISP.

Default Route You can select Enable or Disable.

DNS Settings

Obtain DNS Automatically: IP address is assigned by the

office end automatically. You need not to enter the IP

address.

Use the following DNS server address: If you want to enter

the DNS server address manually, select it and enter the

related data.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 83 84

No comments

Planet ADW-4401 User Manual Page 30