Planet IGS-10020HPT User Manual Page 161
- Page / 658
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
User’s Manual of IGS-10020PT / IGS-10020HPT
161
‧ Extension – Multiple Spanning Tree Protocol (MSTP) : Defines an extension to RSTP to further develop the
usefulness of virtual LANs (VLANs). This "Per-VLAN" Multiple Spanning Tree Protocol configures a separate
Spanning Tree for each VLAN group and blocks all but one of the possible alternate paths within each Spanning
Tree.
The STP System Configuration screen in Figure 4-7-4 appears.
Figure 4-7-4: STP Bridge Configuration Page Screenshot
The page includes the following fields:
Basic Settings
Object Description
• Protocol Version
The STP protocol version setting. Valid values are STP, RSTP and MSTP.
• Bridge Priority
Controls the bridge priority. Lower numeric values have better priority. The bridge
priority plus the MSTI instance number, concatenated with the 6-byte MAC
address of the switch forms a Bridge Identifier.
For MSTP operation, this is the priority of the CIST. Otherwise, this is the priority
of the STP/RSTP bridge.
• Forward Delay
The delay used by STP Bridges to transition Root and Designated Ports to
Forwarding (used in STP compatible mode). Valid values are in the range 4 to 30
seconds
-Default: 15
-Minimum: The higher of 4 or [(Max. Message Age / 2) + 1]
-Maximum: 30
- TABLE OF CONTENTS 3
- 1. INTRODUCTION 24
- 1.2 Product Description 25
- 1000Base-T UTP with PoE 26
- 1.3 How to Use This Manual 28
- 1.4 Product Features 29
- 1.5 Product Specifications 32
- 2. INSTALLATION 36
- 2.1.2 Front Panel 37
- 2.1.3 LED Indicators 38
- 2.1.4 Wiring the Power Input 40
- 2.2.1 Installation Steps 44
- 2.2.2 DIN-Rail Mounting 45
- 2.3 Cabling 48
- 2.3.2 Remove the Module 51
- 3. SWITCH MANAGEMENT 52
- 3.3 CLI Mode Management 54
- 3.4 Web Management 56
- 4. WEB CONFIGURATION 60
- 4.1 Main Web Page 63
- 4.2 System 65
- 4.2.2 IP Configuration 66
- 4.2.3 IPv6 Configuration 67
- 4.2.4 Users Configuration 68
- Add / Edit User 69
- 4.2.5 Privilege Levels 71
- 4.2.6 NTP Configuration 72
- 4.2.7 Daylight Saving 74
- 4.2.8 UPnP 76
- 4.2.9 DHCP Relay 77
- 4.2.10 DHCP Relay Statistics 79
- 4.2.11 CPU Load 80
- 4.2.12 System Log 82
- 4.2.13 Detailed Log 83
- 4.2.14 Remote Syslog 84
- 4.2.15 SMTP Configuration 85
- 4.2.16 Digital Input/Output 86
- 4.2.17 Fault Alarm 88
- 4.2.18 EEE Power Reduction 89
- 4.2.19 Web Firmware Upgrade 90
- 4.2.20 TFTP Firmware Upgrade 91
- 4.2.21 Configuration Backup 92
- 4.2.22 Configuration Upload 94
- 4.2.23 Image Select 95
- 4.2.24 Factory Default 96
- 4.2.25 System Reboot 97
- 4.3.1 SNMP Overview 98
- 4.3.4 SNMPv3 Configuration 103
- 4.4 Port Management 109
- 4.4.3 Port Statistics Detail 112
- 4.4.4 SFP Information 114
- 1000Base-SX 114
- 1000Base-LX 114
- 100Base-FX 114
- 4.4.5 Port Mirror 115
- • Mirror Port Configuration 116
- 4.5 Link Aggregation 117
- 4.5.1 Static Aggregation 120
- 4.5.2 LACP Configuration 122
- 4.5.3 LACP System Status 123
- 4.5.4 LACP Port Status 124
- 4.5.5 LACP Port Statistics 125
- 4.6 VLAN 126
- 4.6.2 IEEE 802.1Q VLAN 127
- ■ 802.1Q VLAN Tags 128
- 4.6.3 VLAN Basic Information 130
- 4.6.5 VLAN Membership 135
- 4.6.6 VLAN Membership Status 136
- 4.6.7 VLAN Port Status 138
- 4.6.8 Private VLAN 139
- 4.6.9 Port Isolation 140
- 4.6.10 VLAN Setting Example: 142
- 4.6.10.3 Port Isolate 147
- 4.6.11 MAC-based VLAN 148
- 4.6.12 MAC-based VLAN Status 149
- 4.6.13 IP Subnet-based VLAN 150
- 4.6.14 Protocol-based VLAN 151
- 4.7 Spanning Tree Protocol 154
- Basic Settings 161
- Advanced Settings 162
- 4.7.3 Bridge Status 163
- 4.7.5 MSTI Priorities 167
- 4.7.6 MSTI Configuration 168
- 4.7.8 Port Status 171
- 4.7.9 Port Statistics 172
- 4.8 Multicast 174
- Type Response Time 176
- 4.8.5 IGMP Snooping Status 183
- 4.8.6 IGMP Group Information 184
- 4.8.7 IGMPv3 Information 185
- 4.8.11 MLD Snooping Status 190
- 4.8.13 MLDv2 Information 192
- 4.8.14 MVR 193
- 4.8.15 MVR Status 195
- 4.8.17 MVR SFM Information 197
- 4.9 Quality of Service 199
- 4.9.2 Port Policing 200
- 4.9.3 Port Shaping 201
- 4.9.4 Port Classification 203
- 4.9.5 Port Scheduler 206
- 4.9.6 Port Tag Remarking 206
- 4.9.7 Port DSCP 208
- 4.9.8 DSCP-Based QoS 210
- 4.9.9 DSCP Translation 211
- 4.9.10 DSCP Classification 213
- 4.9.11 QoS Control List 214
- 4.9.12 QoS Status 217
- 4.9.13 Queue Policing 219
- 4.9.15 QoS Statistics 221
- 4.9.17 Voice VLAN OUI Table 224
- 4.10 Access Control Lists 225
- 4.10.3 ACE Configuration 229
- FRAG OFFSET) field for an 234
- 4.11 Authentication 241
- Port Configuration 250
- Port State 258
- Port Counters 259
- 4.11.7 RADIUS Overview 268
- 4.11.8 RADIUS Details 270
- RADIUS Accounting Servers 273
- 4.12 Security 284
- System Configuration 285
- 4.12.2 Access Management 288
- 4.12.4 HTTPs 290
- 4.12.5 SSH 291
- 4.12.6 Port Security Status 292
- 4.12.7 Port Security Detail 294
- 4.12.8 DHCP Snooping 295
- 4.12.12 ARP Inspection 300
- 4.13 MAC Address Table 302
- 4.14 LLDP 308
- Policies 315
- Port Policies Configuration 317
- 4.14.4 LLDP-MED Neighbor 318
- 4.14.5 Neighbor 322
- 4.14.6 Port Statistics 323
- Local Counters 324
- 4.15 Diagnostics 325
- 4.15.1 Ping 326
- 4.15.2 IPv6 Ping 327
- 4.15.3 Remote IP Ping Test 327
- 4.15.4 Cable Diagnostics 329
- 4.16 Power over Ethernet 330
- 4.16.2 System Configuration 332
- 4.16.3 Port Configuration 335
- 4.16.4 PoE Status 336
- 4.16.5 PoE Schedule 339
- 4.16.6 LLDP PoE Neighbours 342
- 4.17 Loop Protection 345
- 4.17.2 Status 346
- 4.18 RMON 348
- 4.18.2 RMON Alarm Status 350
- 4.18.4 RMON Event Status 352
- 4.18.6 RMON History Status 353
- 4.19 Ring 358
- 4.19.1 MEP Configuration 359
- 4.19.5 Ring Wizard 368
- 4.19.6 Ring Wizard Example: 370
- 5. COMMAND LINE INTERFACE 373
- 6. COMMAND LINE MODE 374
- 6.1 System Command 375
- [<offset>] 378
- 6.2 IP Command 385
- Example: 415
- 6.7 Security Command 419
- 6.9 Link Aggregation Command 503
- 6.11 LLDP Command 511
- 6.12 LLDP MED Command 517
- LLDP MED ECS 518
- LLDP MED Info 522
- 6.13 EEE Command 523
- 6.14 Thermal Command 525
- Thermal Configuration 526
- 6.15 PoE Command 527
- PoE Status 529
- EVC ECE Add 534
- EVC ECE Status 536
- MEP Config 539
- QoS QCL Add 566
- 6.20 Mirror Command 570
- 6.21 Configuration Command 572
- 6.22 Firmware Command 573
- Firmware Swap 574
- 6.23 UPnP Command 575
- 6.24 MVR Command 577
- 6.25 Voice VLAN Command 583
- 6.27 Loop Protect Command 597
- 6.28 IPMC Command 600
- 6.30 SMTP Command 618
- 6.31 DIDO Command 622
- 6.32 Show Command 627
- Show STP 634
- 7. SWITCH OPERATION 635
- 7.5 Auto-Negotiation 636
- 8. TROUBLE SHOOTING 637
- APPENDEX A 639
- APPENDEX B: GLOSSARY 641
- Aggregation 642
Related products and manuals for Routers Planet IGS-10020HPT
Routers Planet LRP-101CE User Manual
(20 pages)
(20 pages)
Routers Planet PL-502P User Manual
(2 pages)
(2 pages)
Routers Planet POE-1200 User Manual
(2 pages)
(2 pages)
Routers Planet POE-150 User Manual
(22 pages)
(22 pages)
Routers Planet POE-151 User Manual
(2 pages)
(2 pages)
Routers Planet POE-1200 User Manual
(45 pages)
(45 pages)
Routers Planet POE-151 User Manual
(52 pages)
(52 pages)
Routers Planet POE-152S User Manual
(2 pages)
(2 pages)
Routers Planet POE-161 User Manual
(2 pages)
(2 pages)
Routers Planet POE-161 User Manual
(24 pages)
(24 pages)
Routers Planet POE-151S User Manual
(60 pages)
(60 pages)
Routers Planet POE-165S User Manual
(2 pages)
(2 pages)
Routers Planet POE-163 User Manual
(2 pages)
(2 pages)
Routers Planet POE-173 User Manual
(2 pages)
(2 pages)
Routers Planet POE-171 User Manual
(20 pages)
(20 pages)
Routers Planet POE-E201 User Manual
(2 pages)
(2 pages)
Routers Planet VIP-1010PT User Manual
(2 pages)
(2 pages)
Routers Planet VC-203PR User Manual
(24 pages)
(24 pages)
Routers Planet VIP-156PE User Manual
(68 pages)
(68 pages)
Routers Planet VIP-156PE User Manual
(75 pages)
(75 pages)
© 2020, manymanuals.com. All rights reserved. | 1.804 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals