Planet IGS-10020HPT User Manual Page 112
- Page / 658
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
User’s Manual of IGS-10020PT / IGS-10020HPT
112
4.4.3 Port Statistics Detail
This page provides detailed traffic statistics for a specific switch port. Use the port select box to select which switch port details
to display. The selected port is belonging to the currently selected stack unit, as reflected by the page header. The displayed
counters are the totals for receive and transmit, the size counters for receive and transmit, and the error counters for receive
and transmit. The Port Statistics Detail screen in Figure 4-4-3 appears.
Figure 4-4-3: Detailed Port Statistics Port 1 Page Screenshot
The page includes the following fields:
Receive Total and Transmit Total
Object Description
• Rx and Tx Packets
The number of received and transmitted (good and bad) packets
• Rx and Tx Octets
The number of received and transmitted (good and bad) bytes. Includes FCS, but
excludes framing bits.
• Rx and Tx Unicast
The number of received and transmitted (good and bad) unicast packets.
• Rx and Tx Multicast
The number of received and transmitted (good and bad) multicast packets.
• Rx and Tx Broadcast
The number of received and transmitted (good and bad) broadcast packets.
• Rx and Tx Pause
A count of the MAC Control frames received or transmitted on this port that have
an opcode indicating a PAUSE operation.
- TABLE OF CONTENTS 3
- 1. INTRODUCTION 24
- 1.2 Product Description 25
- 1000Base-T UTP with PoE 26
- 1.3 How to Use This Manual 28
- 1.4 Product Features 29
- 1.5 Product Specifications 32
- 2. INSTALLATION 36
- 2.1.2 Front Panel 37
- 2.1.3 LED Indicators 38
- 2.1.4 Wiring the Power Input 40
- 2.2.1 Installation Steps 44
- 2.2.2 DIN-Rail Mounting 45
- 2.3 Cabling 48
- 2.3.2 Remove the Module 51
- 3. SWITCH MANAGEMENT 52
- 3.3 CLI Mode Management 54
- 3.4 Web Management 56
- 4. WEB CONFIGURATION 60
- 4.1 Main Web Page 63
- 4.2 System 65
- 4.2.2 IP Configuration 66
- 4.2.3 IPv6 Configuration 67
- 4.2.4 Users Configuration 68
- Add / Edit User 69
- 4.2.5 Privilege Levels 71
- 4.2.6 NTP Configuration 72
- 4.2.7 Daylight Saving 74
- 4.2.8 UPnP 76
- 4.2.9 DHCP Relay 77
- 4.2.10 DHCP Relay Statistics 79
- 4.2.11 CPU Load 80
- 4.2.12 System Log 82
- 4.2.13 Detailed Log 83
- 4.2.14 Remote Syslog 84
- 4.2.15 SMTP Configuration 85
- 4.2.16 Digital Input/Output 86
- 4.2.17 Fault Alarm 88
- 4.2.18 EEE Power Reduction 89
- 4.2.19 Web Firmware Upgrade 90
- 4.2.20 TFTP Firmware Upgrade 91
- 4.2.21 Configuration Backup 92
- 4.2.22 Configuration Upload 94
- 4.2.23 Image Select 95
- 4.2.24 Factory Default 96
- 4.2.25 System Reboot 97
- 4.3.1 SNMP Overview 98
- 4.3.4 SNMPv3 Configuration 103
- 4.4 Port Management 109
- 4.4.3 Port Statistics Detail 112
- 4.4.4 SFP Information 114
- 1000Base-SX 114
- 1000Base-LX 114
- 100Base-FX 114
- 4.4.5 Port Mirror 115
- • Mirror Port Configuration 116
- 4.5 Link Aggregation 117
- 4.5.1 Static Aggregation 120
- 4.5.2 LACP Configuration 122
- 4.5.3 LACP System Status 123
- 4.5.4 LACP Port Status 124
- 4.5.5 LACP Port Statistics 125
- 4.6 VLAN 126
- 4.6.2 IEEE 802.1Q VLAN 127
- ■ 802.1Q VLAN Tags 128
- 4.6.3 VLAN Basic Information 130
- 4.6.5 VLAN Membership 135
- 4.6.6 VLAN Membership Status 136
- 4.6.7 VLAN Port Status 138
- 4.6.8 Private VLAN 139
- 4.6.9 Port Isolation 140
- 4.6.10 VLAN Setting Example: 142
- 4.6.10.3 Port Isolate 147
- 4.6.11 MAC-based VLAN 148
- 4.6.12 MAC-based VLAN Status 149
- 4.6.13 IP Subnet-based VLAN 150
- 4.6.14 Protocol-based VLAN 151
- 4.7 Spanning Tree Protocol 154
- Basic Settings 161
- Advanced Settings 162
- 4.7.3 Bridge Status 163
- 4.7.5 MSTI Priorities 167
- 4.7.6 MSTI Configuration 168
- 4.7.8 Port Status 171
- 4.7.9 Port Statistics 172
- 4.8 Multicast 174
- Type Response Time 176
- 4.8.5 IGMP Snooping Status 183
- 4.8.6 IGMP Group Information 184
- 4.8.7 IGMPv3 Information 185
- 4.8.11 MLD Snooping Status 190
- 4.8.13 MLDv2 Information 192
- 4.8.14 MVR 193
- 4.8.15 MVR Status 195
- 4.8.17 MVR SFM Information 197
- 4.9 Quality of Service 199
- 4.9.2 Port Policing 200
- 4.9.3 Port Shaping 201
- 4.9.4 Port Classification 203
- 4.9.5 Port Scheduler 206
- 4.9.6 Port Tag Remarking 206
- 4.9.7 Port DSCP 208
- 4.9.8 DSCP-Based QoS 210
- 4.9.9 DSCP Translation 211
- 4.9.10 DSCP Classification 213
- 4.9.11 QoS Control List 214
- 4.9.12 QoS Status 217
- 4.9.13 Queue Policing 219
- 4.9.15 QoS Statistics 221
- 4.9.17 Voice VLAN OUI Table 224
- 4.10 Access Control Lists 225
- 4.10.3 ACE Configuration 229
- FRAG OFFSET) field for an 234
- 4.11 Authentication 241
- Port Configuration 250
- Port State 258
- Port Counters 259
- 4.11.7 RADIUS Overview 268
- 4.11.8 RADIUS Details 270
- RADIUS Accounting Servers 273
- 4.12 Security 284
- System Configuration 285
- 4.12.2 Access Management 288
- 4.12.4 HTTPs 290
- 4.12.5 SSH 291
- 4.12.6 Port Security Status 292
- 4.12.7 Port Security Detail 294
- 4.12.8 DHCP Snooping 295
- 4.12.12 ARP Inspection 300
- 4.13 MAC Address Table 302
- 4.14 LLDP 308
- Policies 315
- Port Policies Configuration 317
- 4.14.4 LLDP-MED Neighbor 318
- 4.14.5 Neighbor 322
- 4.14.6 Port Statistics 323
- Local Counters 324
- 4.15 Diagnostics 325
- 4.15.1 Ping 326
- 4.15.2 IPv6 Ping 327
- 4.15.3 Remote IP Ping Test 327
- 4.15.4 Cable Diagnostics 329
- 4.16 Power over Ethernet 330
- 4.16.2 System Configuration 332
- 4.16.3 Port Configuration 335
- 4.16.4 PoE Status 336
- 4.16.5 PoE Schedule 339
- 4.16.6 LLDP PoE Neighbours 342
- 4.17 Loop Protection 345
- 4.17.2 Status 346
- 4.18 RMON 348
- 4.18.2 RMON Alarm Status 350
- 4.18.4 RMON Event Status 352
- 4.18.6 RMON History Status 353
- 4.19 Ring 358
- 4.19.1 MEP Configuration 359
- 4.19.5 Ring Wizard 368
- 4.19.6 Ring Wizard Example: 370
- 5. COMMAND LINE INTERFACE 373
- 6. COMMAND LINE MODE 374
- 6.1 System Command 375
- [<offset>] 378
- 6.2 IP Command 385
- Example: 415
- 6.7 Security Command 419
- 6.9 Link Aggregation Command 503
- 6.11 LLDP Command 511
- 6.12 LLDP MED Command 517
- LLDP MED ECS 518
- LLDP MED Info 522
- 6.13 EEE Command 523
- 6.14 Thermal Command 525
- Thermal Configuration 526
- 6.15 PoE Command 527
- PoE Status 529
- EVC ECE Add 534
- EVC ECE Status 536
- MEP Config 539
- QoS QCL Add 566
- 6.20 Mirror Command 570
- 6.21 Configuration Command 572
- 6.22 Firmware Command 573
- Firmware Swap 574
- 6.23 UPnP Command 575
- 6.24 MVR Command 577
- 6.25 Voice VLAN Command 583
- 6.27 Loop Protect Command 597
- 6.28 IPMC Command 600
- 6.30 SMTP Command 618
- 6.31 DIDO Command 622
- 6.32 Show Command 627
- Show STP 634
- 7. SWITCH OPERATION 635
- 7.5 Auto-Negotiation 636
- 8. TROUBLE SHOOTING 637
- APPENDEX A 639
- APPENDEX B: GLOSSARY 641
- Aggregation 642
Related products and manuals for Routers Planet IGS-10020HPT
Routers Planet LRP-101CE User Manual
(20 pages)
(20 pages)
Routers Planet PL-502P User Manual
(2 pages)
(2 pages)
Routers Planet POE-1200 User Manual
(2 pages)
(2 pages)
Routers Planet POE-150 User Manual
(22 pages)
(22 pages)
Routers Planet POE-151 User Manual
(2 pages)
(2 pages)
Routers Planet POE-1200 User Manual
(45 pages)
(45 pages)
Routers Planet POE-151 User Manual
(52 pages)
(52 pages)
Routers Planet POE-152S User Manual
(2 pages)
(2 pages)
Routers Planet POE-161 User Manual
(2 pages)
(2 pages)
Routers Planet POE-161 User Manual
(24 pages)
(24 pages)
Routers Planet POE-151S User Manual
(60 pages)
(60 pages)
Routers Planet POE-165S User Manual
(2 pages)
(2 pages)
Routers Planet POE-163 User Manual
(2 pages)
(2 pages)
Routers Planet POE-173 User Manual
(2 pages)
(2 pages)
Routers Planet POE-171 User Manual
(20 pages)
(20 pages)
Routers Planet POE-E201 User Manual
(2 pages)
(2 pages)
Routers Planet VIP-1010PT User Manual
(2 pages)
(2 pages)
Routers Planet VC-203PR User Manual
(24 pages)
(24 pages)
Routers Planet VIP-156PE User Manual
(68 pages)
(68 pages)
Routers Planet VIP-156PE User Manual
(75 pages)
(75 pages)
© 2020, manymanuals.com. All rights reserved. | 1.099 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals