User’s Manual of IGS-10020PT / IGS-10020HPT 1
User’s Manual of IGS-10020PT / IGS-10020HPT 10 IP DNS Proxy ...
User’s Manual of IGS-10020PT / IGS-10020HPT 100 SNMP v3: Set SNMP supported version 3. • Read Community Indicates the community read access str
User’s Manual of IGS-10020PT / IGS-10020HPT 101 be a dot or a dash. • Trap Destination IPv6 Address Indicates the SNMP trap destination IPv6 addre
User’s Manual of IGS-10020PT / IGS-10020HPT 102 4.3.3 SNMP System Information The switch system information is provided here. The SNMP System Infor
User’s Manual of IGS-10020PT / IGS-10020HPT 103 4.3.4 SNMPv3 Configuration 4.3.4.1 SNMPv3 Communities Configure SNMPv3 communities table on this pa
User’s Manual of IGS-10020PT / IGS-10020HPT 104 4.3.4.2 SNMPv3 Users Configure SNMPv3 users table on this page. The entry index keys are Engine ID
User’s Manual of IGS-10020PT / IGS-10020HPT 105 authentication protocol. SHA: An optional flag to indicate that this user using SHA authentica
User’s Manual of IGS-10020PT / IGS-10020HPT 106 The page includes the following fields: Object Description • Delete Check to delete the entry. It
User’s Manual of IGS-10020PT / IGS-10020HPT 107 • View Name A string identifying the view name that this entry should belong to. The allowed strin
User’s Manual of IGS-10020PT / IGS-10020HPT 108 • Group Name A string identifying the group name that this entry should belong to. The allowed str
User’s Manual of IGS-10020PT / IGS-10020HPT 109 4.4 Port Management Use the Port Menu to display or configure the Managed Switch's ports. This
User’s Manual of IGS-10020PT / IGS-10020HPT 11 VLAN Q-in-Q Mode ...
User’s Manual of IGS-10020PT / IGS-10020HPT 110 • Configured Link Speed Select any available link speed for the given switch port. Draw the menu b
User’s Manual of IGS-10020PT / IGS-10020HPT 111 Buttons : Click to save changes. : Click to undo any changes made locally and revert to previously
User’s Manual of IGS-10020PT / IGS-10020HPT 112 4.4.3 Port Statistics Detail This page provides detailed traffic statistics for a specific switch p
User’s Manual of IGS-10020PT / IGS-10020HPT 113 Receive and Transmit Size Counters The number of received and transmitted (good and bad) packets sp
User’s Manual of IGS-10020PT / IGS-10020HPT 114 4.4.4 SFP Information You can check the physical or operational status of an SFP module via the SFP
User’s Manual of IGS-10020PT / IGS-10020HPT 115 • RX Power (dBm) Display the RX power of the current SFP module. The RX power value is gotten from
User’s Manual of IGS-10020PT / IGS-10020HPT 116 • Mirror Port Configuration The Port Mirror screen in Figure 4-4-6 appears. Figure 4-4-6: Mirror
User’s Manual of IGS-10020PT / IGS-10020HPT 117 Buttons : Click to save changes. : Click to undo any changes made locally and revert to previously
User’s Manual of IGS-10020PT / IGS-10020HPT 118 Figure 4-5-1: Link Aggregation Topology The Link Aggregation Control Protocol (LACP) provides a s
User’s Manual of IGS-10020PT / IGS-10020HPT 119 avoid creating a data loop. It allows a maximum of 10 ports to be aggregated at the same time. The
User’s Manual of IGS-10020PT / IGS-10020HPT 12 Security Switch Access Clear ...
User’s Manual of IGS-10020PT / IGS-10020HPT 120 4.5.1 Static Aggregation This page is used to configure the Aggregation hash mode and the aggregati
User’s Manual of IGS-10020PT / IGS-10020HPT 121 Static Aggregation Group Configuration The Aggregation Group Configuration screen in Figure 4-5-3 a
User’s Manual of IGS-10020PT / IGS-10020HPT 122 4.5.2 LACP Configuration Link Aggregation Control Protocol (LACP) - LACP LAG negotiate Aggregated P
User’s Manual of IGS-10020PT / IGS-10020HPT 123 • Role The Role shows the LACP activity status. The Active will transmit LACP packets each second;
User’s Manual of IGS-10020PT / IGS-10020HPT 124 Buttons : Click to refresh the page immediately. Auto-refresh : Automatic refresh occurs every 3 se
User’s Manual of IGS-10020PT / IGS-10020HPT 125 Buttons : Click to refresh the page immediately. Auto-refresh : Automatic refresh occurs every 3 se
User’s Manual of IGS-10020PT / IGS-10020HPT 126 4.6 VLAN 4.6.1 VLAN Overview A Virtual Local Area Network (VLAN) is a network topology configured a
User’s Manual of IGS-10020PT / IGS-10020HPT 127 4.6.2 IEEE 802.1Q VLAN In large networks, routers are used to isolate broadcast traffic for each
User’s Manual of IGS-10020PT / IGS-10020HPT 128 - Untagging - The act of stripping 802.1Q VLAN information out of the packet header. 802.1Q VL
User’s Manual of IGS-10020PT / IGS-10020HPT 129 Port VLAN ID Packets that are tagged (are carrying the 802.1Q VID information) can be transmitte
User’s Manual of IGS-10020PT / IGS-10020HPT 13 Security Switch RMON History Add ...
User’s Manual of IGS-10020PT / IGS-10020HPT 130 VLAN Classification When the switch receives a frame, it classifies the frame in one of two wa
User’s Manual of IGS-10020PT / IGS-10020HPT 131 • Current number of VLANs Display the current number of VLANs • VLAN Learning Display the VLAN le
User’s Manual of IGS-10020PT / IGS-10020HPT 132 QinQ tunneling is used to maintain customer-specific VLAN and Layer 2 protocol configurations even
User’s Manual of IGS-10020PT / IGS-10020HPT 133 VLAN Port Configuration The VLAN Port Configuration screen in Figure 4-6-2 appears. Figure 4-6-2 :
User’s Manual of IGS-10020PT / IGS-10020HPT 134 frames, untagged frames received on the port are discarded. By default, the field is set to All. •
User’s Manual of IGS-10020PT / IGS-10020HPT 135 4.6.5 VLAN Membership Adding Static Members to VLANs (VLAN Index) Use the VLAN Static Table to c
User’s Manual of IGS-10020PT / IGS-10020HPT 136 A VLAN without any port members on any stack unit will be deleted when you click "Save".
User’s Manual of IGS-10020PT / IGS-10020HPT 137 for all VLANs configured by a selected VLAN User (selection shall be allowed by a Combo Box). When
User’s Manual of IGS-10020PT / IGS-10020HPT 138 4.6.7 VLAN Port Status This page provides VLAN Port Staus. The VLAN Port Status screen in Figure 4-
User’s Manual of IGS-10020PT / IGS-10020HPT 139 4.6.8 Private VLAN The Private VLAN membership configurations for the switch can be monitored and m
User’s Manual of IGS-10020PT / IGS-10020HPT 14 Security Network ACL Status ...
User’s Manual of IGS-10020PT / IGS-10020HPT 140 : Click to undo any changes made locally and revert to previously saved values. Auto-refresh : Chec
User’s Manual of IGS-10020PT / IGS-10020HPT 141 Promiscuous ports — Ports from which traffic can be forwarded to all ports in the private VLAN —
User’s Manual of IGS-10020PT / IGS-10020HPT 142 4.6.10 VLAN Setting Example: - Separate VLAN - 802.1Q VLAN Trunk - Port Isolate 4.6.10.1 Two separ
User’s Manual of IGS-10020PT / IGS-10020HPT 143 1. While [PC-1] transmitting an untagged packet enters Port-1, the Managed Switch will tag it with
User’s Manual of IGS-10020PT / IGS-10020HPT 144 Figure 4-6-9: Add new VLAN group, assign VLAN members to VLAN 2 and VLAN 3 and remove specified po
User’s Manual of IGS-10020PT / IGS-10020HPT 145 4.6.10.2 VLAN Trunking between two 802.1Q aware Switch In most cases, it is used for “Uplink” to
User’s Manual of IGS-10020PT / IGS-10020HPT 146 1. Specify Port-8 to be the 802.1Q VLAN Trunk port. 2. Assign Port-8 to both VLAN 2 and VLAN 3 at
User’s Manual of IGS-10020PT / IGS-10020HPT 147 4.6.10.3 Port Isolate The diagram shows how the Managed Switch handles isolate and promiscuous port
User’s Manual of IGS-10020PT / IGS-10020HPT 148 Figure 4-6-16: Private VLAN Port Setting 4.6.11 MAC-based VLAN The MAC-based VLAN enties can be
User’s Manual of IGS-10020PT / IGS-10020HPT 149 : Click to save changes. : Click to undo any changes made locally and revert to previously saved va
User’s Manual of IGS-10020PT / IGS-10020HPT 15 STP BPDU Guard...
User’s Manual of IGS-10020PT / IGS-10020HPT 150 4.6.13 IP Subnet-based VLAN This page allows for adding, updating and deleting IP subnet-based VLAN
User’s Manual of IGS-10020PT / IGS-10020HPT 151 4.6.14 Protocol-based VLAN This page allows you to add new protocols to Group Name (unique for each
User’s Manual of IGS-10020PT / IGS-10020HPT 152 a.OUI: OUI (Organizationally Unique Identifier) is value in format of xx-xx-xx where each pair (xx)
User’s Manual of IGS-10020PT / IGS-10020HPT 153 The page includes the following fields: Object Description • Delete To delete a Group Name to VLA
User’s Manual of IGS-10020PT / IGS-10020HPT 154 4.7 Spanning Tree Protocol 4.7.1 Theory The Spanning Tree protocol can be used to detect and disabl
User’s Manual of IGS-10020PT / IGS-10020HPT 155 The port identifier of the transmitting port The switch sends BPDUs to communicate and construct
User’s Manual of IGS-10020PT / IGS-10020HPT 156 From disabled to blocking Figure 4-7-1: STP Port State Transitions You can modify each port sta
User’s Manual of IGS-10020PT / IGS-10020HPT 157 The following are the user-configurable STP parameters for the switch level: Parameter Descriptio
User’s Manual of IGS-10020PT / IGS-10020HPT 158 Port priority 128 Port cost 0 Bridge Priority 32,768 User-Changeable STA Parameters The switch’
User’s Manual of IGS-10020PT / IGS-10020HPT 159 A and so on. The broadcast packet will be passed indefinitely in a loop, potentially causing a netw
User’s Manual of IGS-10020PT / IGS-10020HPT 16 LLDP Interval ...
User’s Manual of IGS-10020PT / IGS-10020HPT 160 In this example, only the default STP values are used. Figure 4-7-3: After Applying the STA Ru
User’s Manual of IGS-10020PT / IGS-10020HPT 161 ‧ Extension – Multiple Spanning Tree Protocol (MSTP) : Defines an extension to RSTP to further dev
User’s Manual of IGS-10020PT / IGS-10020HPT 162 • Max Age The maximum age of the information transmitted by the Bridge when it is the Root Bridge.
User’s Manual of IGS-10020PT / IGS-10020HPT 163 4.7.3 Bridge Status This page provides a status overview for all STP bridge instances. The displaye
User’s Manual of IGS-10020PT / IGS-10020HPT 164 Figure 4-7-6 : STP CIST Port Configuration Page Screenshot The page includes the following fields
User’s Manual of IGS-10020PT / IGS-10020HPT 165 • operEdge (state flag) Operational flag describing whether the port is connecting directly to edg
User’s Manual of IGS-10020PT / IGS-10020HPT 166 By default, the system automatically detects the speed and duplex mode used on each port, and confi
User’s Manual of IGS-10020PT / IGS-10020HPT 167 4.7.5 MSTI Priorities This page allows the user to inspect the current STP MSTI bridge instance pri
User’s Manual of IGS-10020PT / IGS-10020HPT 168 4.7.6 MSTI Configuration This page allows the user to inspect the current STP MSTI bridge instance
User’s Manual of IGS-10020PT / IGS-10020HPT 169 The page includes the following fields: Configuration Identification Object Description • Configu
User’s Manual of IGS-10020PT / IGS-10020HPT 17 EVC Port Addr ...
User’s Manual of IGS-10020PT / IGS-10020HPT 170 The page includes the following fields: MSTI Port Configuration Object Description • Select MSTI
User’s Manual of IGS-10020PT / IGS-10020HPT 171 cost ports are chosen as forwarding ports in favor of higher path cost ports. Valid values are in t
User’s Manual of IGS-10020PT / IGS-10020HPT 172 AlternatePort BackupPort RootPort DesignatedPort • CIST State The current STP port sta
User’s Manual of IGS-10020PT / IGS-10020HPT 173 • TCN The number of (legacy) Topology Change Notification BPDU's received/transmitted on the
User’s Manual of IGS-10020PT / IGS-10020HPT 174 4.8 Multicast 4.8.1 IGMP Snooping The Internet Group Management Protocol (IGMP) lets host and route
User’s Manual of IGS-10020PT / IGS-10020HPT 175 Figure 4-8-2: Multicast Flooding Figure 4-8-3: IGMP Snooping Multicast Stream Control
User’s Manual of IGS-10020PT / IGS-10020HPT 176 IGMP Versions 1 and 2 Multicast groups allow members to join or leave at any time. IGMP provides th
User’s Manual of IGS-10020PT / IGS-10020HPT 177 message, and query messages that are specific to a given group. The states a computer will go throu
User’s Manual of IGS-10020PT / IGS-10020HPT 178 4.8.2 IGMP Snooping Configuration This page provides IGMP Snooping related configuration. The IGMP
User’s Manual of IGS-10020PT / IGS-10020HPT 179 • Router Port Specify which ports act as IGMP router ports. A router port is a port on the Etherne
User’s Manual of IGS-10020PT / IGS-10020HPT 18 6.19 Quality of Service Command ...
User’s Manual of IGS-10020PT / IGS-10020HPT 180 Figure 4-8-6: IGMP Snooping VLAN Configuration Page Screenshot The page includes the following fi
User’s Manual of IGS-10020PT / IGS-10020HPT 181 Buttons : Refreshes the displayed table starting from the "VLAN" input fields. : Updates
User’s Manual of IGS-10020PT / IGS-10020HPT 182 • Port The logical port for the settings. • Filtering Group The IP Multicast Group that will be f
User’s Manual of IGS-10020PT / IGS-10020HPT 183 4.8.5 IGMP Snooping Status This page provides IGMP Snooping status. The IGMP Snooping Status screen
User’s Manual of IGS-10020PT / IGS-10020HPT 184 4.8.6 IGMP Group Information Entries in the IGMP Group Table are shown on this page. The IGMP Group
User’s Manual of IGS-10020PT / IGS-10020HPT 185 4.8.7 IGMPv3 Information Entries in the IGMP SFM Information Table are shown on this page. The IGMP
User’s Manual of IGS-10020PT / IGS-10020HPT 186 : Updates the table, starting with the entry after the last entry currently displayed. 4.8.8 MLD Sn
User’s Manual of IGS-10020PT / IGS-10020HPT 187 join and leave messages to the router side. • Router Port Specify which ports act as router ports.
User’s Manual of IGS-10020PT / IGS-10020HPT 188 • MLD Snooping Enable Enable the per-VLAN MLD Snooping. Only up to 64 VLANs can be selected. • ML
User’s Manual of IGS-10020PT / IGS-10020HPT 189 4.8.10 MLD Snooping Port Group Filtering In certain switch applications, the administrator may want
User’s Manual of IGS-10020PT / IGS-10020HPT 19 6.20 Mirror Command ...
User’s Manual of IGS-10020PT / IGS-10020HPT 190 4.8.11 MLD Snooping Status This page provides MLD Snooping status. The IGMP Snooping Status screen
User’s Manual of IGS-10020PT / IGS-10020HPT 191 4.8.12 MLD Groups Information Entries in the MLD Group Table are shown on this page. The MLD Group
User’s Manual of IGS-10020PT / IGS-10020HPT 192 4.8.13 MLDv2 Information Entries in the MLD SFM Information Table are shown on this page. The MLD S
User’s Manual of IGS-10020PT / IGS-10020HPT 193 : Updates the table, starting with the entry after the last entry currently displayed. 4.8.14 M
User’s Manual of IGS-10020PT / IGS-10020HPT 194 The page includes the following fields: Object Description • MVR Mode Enable/Disable the Global M
User’s Manual of IGS-10020PT / IGS-10020HPT 195 ports. Receiver: Configure a port as a receiver port if it is a subscriber port and should only
User’s Manual of IGS-10020PT / IGS-10020HPT 196 • IGMPv2/MLDv1 Reports Received The number of Received IGMPv2 Joins and MLDv1 Reports, respectivel
User’s Manual of IGS-10020PT / IGS-10020HPT 197 • Port Members Ports under this group. Buttons Auto-refresh : Check this box to refresh the page
User’s Manual of IGS-10020PT / IGS-10020HPT 198 • Type Indicates the Type. It can be either Allow or Deny. • Hardware Filter / Switch Indicates w
User’s Manual of IGS-10020PT / IGS-10020HPT 199 4.9 Quality of Service 4.9.1 Understand QOS Quality of Service (QoS) is an advanced traffic pri
User’s Manual of IGS-10020PT / IGS-10020HPT 2 Trademarks Copyright © PLANET Technology Corp. 2013. Contents are subject to revise without prior not
User’s Manual of IGS-10020PT / IGS-10020HPT 20 Voice VLAN OUI Clear ...
User’s Manual of IGS-10020PT / IGS-10020HPT 200 4.9.2 Port Policing This page allows you to configure the Policer settings for all switch ports. Th
User’s Manual of IGS-10020PT / IGS-10020HPT 201 4.9.3 Port Shaping This page provides an overview of QoS Egress Port Shapers for all switch ports.
User’s Manual of IGS-10020PT / IGS-10020HPT 202 Figure 4-9-3: QoS Egress Port Schedule and Shapers Page Screenshot The page includes the followin
User’s Manual of IGS-10020PT / IGS-10020HPT 203 • Port Shaper Rate Controls the rate for the port shaper. The default value is 500. This value is
User’s Manual of IGS-10020PT / IGS-10020HPT 204 Controls the default QoS class, i.e., the QoS class for frames not classified in any other way. The
User’s Manual of IGS-10020PT / IGS-10020HPT 205 Figure 4-9-5 : QoS Ingress Port Tag Classification Page Screenshot The page includes the followin
User’s Manual of IGS-10020PT / IGS-10020HPT 206 4.9.5 Port Scheduler This page provides an overview of QoS Egress Port Schedulers for all switch po
User’s Manual of IGS-10020PT / IGS-10020HPT 207 Figure 4-9-7: QoS Egress Port Tag Remarking Page Screenshot The page includes the following field
User’s Manual of IGS-10020PT / IGS-10020HPT 208 The page includes the following fields: Object Description • Mode Controls the tag remarking mode
User’s Manual of IGS-10020PT / IGS-10020HPT 209 Figure 4-9-9 : QoS Port DSCP Configuration Page Screenshot The page includes the following fields:
User’s Manual of IGS-10020PT / IGS-10020HPT 21 IPMC SSM ...
User’s Manual of IGS-10020PT / IGS-10020HPT 210 4.9.8 DSCP-Based QoS This page allows you to configure the basic QoS DSCP based QoS Ingress Classif
User’s Manual of IGS-10020PT / IGS-10020HPT 211 • DPL The Configuration All with available values will assign to whole DSCP values. Drop Precedenc
User’s Manual of IGS-10020PT / IGS-10020HPT 212 The page includes the following fields: Object Description • DSCP Maximum numbers of supported DS
User’s Manual of IGS-10020PT / IGS-10020HPT 213 4.9.10 DSCP Classification This page allows you to map DSCP value to a QoS Class and DPL value. The
User’s Manual of IGS-10020PT / IGS-10020HPT 214 4.9.11 QoS Control List This page shows the QoS Control List (QCL), which is made up of the QCEs.
User’s Manual of IGS-10020PT / IGS-10020HPT 215 • DEI Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or 'Any&a
User’s Manual of IGS-10020PT / IGS-10020HPT 216 The page includes the following fields: Object Description • Port Members Check the checkbox butt
User’s Manual of IGS-10020PT / IGS-10020HPT 217 DSCP Diffserv Code Point value(DSCP): It can be specific value, range of value or 'Any'.
User’s Manual of IGS-10020PT / IGS-10020HPT 218 Figure 4-9-15: QoS Control List Status Page Screenshot The page includes the following fields: Ob
User’s Manual of IGS-10020PT / IGS-10020HPT 219 Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3
User’s Manual of IGS-10020PT / IGS-10020HPT 22 SMTP Server ...
User’s Manual of IGS-10020PT / IGS-10020HPT 220 Buttons : Click to save changes. : Click to undo any changes made locally and revert to previously
User’s Manual of IGS-10020PT / IGS-10020HPT 221 : Click to undo any changes made locally and revert to previously saved values. 4.9.15 QoS Statist
User’s Manual of IGS-10020PT / IGS-10020HPT 222 4.9.16 Voice VLAN Configuration The Voice VLAN feature enables voice traffic forwarding on the Vo
User’s Manual of IGS-10020PT / IGS-10020HPT 223 management VID, MVR VID, PVID etc. The allowed range is 1 to 4095. • Age Time Indicates the Voice
User’s Manual of IGS-10020PT / IGS-10020HPT 224 4.9.17 Voice VLAN OUI Table Configure VOICE VLAN OUI table on this page. The maximum entry number i
User’s Manual of IGS-10020PT / IGS-10020HPT 225 4.10 Access Control Lists ACL is an acronym for Access Control List. It is the list table of ACEs,
User’s Manual of IGS-10020PT / IGS-10020HPT 226 ARP: The ACE will match ARP/RARP frames. IPv4: The ACE will match all IPv4 frames. IPv
User’s Manual of IGS-10020PT / IGS-10020HPT 227 4.10.2 Access Control List Configuration This page shows the Access Control List (ACL), which is ma
User’s Manual of IGS-10020PT / IGS-10020HPT 228 • Rate Limiter Indicates the rate limiter number of the ACE. The allowed range is 1 to 16. When Di
User’s Manual of IGS-10020PT / IGS-10020HPT 229 4.10.3 ACE Configuration Configure an ACE (Access Control Entry) on this page. An ACE consists of
User’s Manual of IGS-10020PT / IGS-10020HPT 23 Show MVR ...
User’s Manual of IGS-10020PT / IGS-10020HPT 230 • Policy Value When "Specific" is selected for the policy filter, you can enter a specif
User’s Manual of IGS-10020PT / IGS-10020HPT 231 MAC Parameters Object Description • SMAC Filter (Only displayed when the frame type is Etherne
User’s Manual of IGS-10020PT / IGS-10020HPT 232 priority. The allowed number range is 0 to 7. The value Any means that no tag priority is specified
User’s Manual of IGS-10020PT / IGS-10020HPT 233 • ARP SMAC Match Specify whether frames can hit the action according to their sender hardware addr
User’s Manual of IGS-10020PT / IGS-10020HPT 234 defining UDP parameters will apper. These fields are explained later in this help file. TCP: S
User’s Manual of IGS-10020PT / IGS-10020HPT 235 • DIP Filter Specify the destination IP filter for this ACE. Any: No destination IP filter is
User’s Manual of IGS-10020PT / IGS-10020HPT 236 Specific: If you want to filter a specific TCP/UDP source filter with this ACE, you can enter a
User’s Manual of IGS-10020PT / IGS-10020HPT 237 • TCP RST Specify the TCP "Reset the connection" (RST) value for this ACE. 0: TCP f
User’s Manual of IGS-10020PT / IGS-10020HPT 238 Buttons : Click to save changes. : Click to undo any changes made locally and revert to previously
User’s Manual of IGS-10020PT / IGS-10020HPT 239 • Port Redirect Select which port frames are redirected on. The allowed values are Disabled or a s
User’s Manual of IGS-10020PT / IGS-10020HPT 24 1. INTRODUCTION PLANET IGS-10020PT / IGS-10020HPT Industrial 8-Port 10/100/1000T 802.3af/at PoE +
User’s Manual of IGS-10020PT / IGS-10020HPT 240 4.10.5 ACL Rate Limiter Configuration Configure the rate limiter for the ACL of the switch. The A
User’s Manual of IGS-10020PT / IGS-10020HPT 241 4.11 Authentication This section is to control the access of the Managed Switch, includes the user
User’s Manual of IGS-10020PT / IGS-10020HPT 242 is a valid RADIUS user can be used by anyone, and only the MD5-Challenge method is supported. The
User’s Manual of IGS-10020PT / IGS-10020HPT 243 Device Roles With 802.1X port-based authentication, the devices in the network have specific rol
User’s Manual of IGS-10020PT / IGS-10020HPT 244 Authentication Protocol (EAP) frames and interacting with the authentication server. When the switc
User’s Manual of IGS-10020PT / IGS-10020HPT 245 Figure 4-11-2: EAP Message Exchange Ports in Authorized and Unauthorized States The switch por
User’s Manual of IGS-10020PT / IGS-10020HPT 246 4.11.2 Authentication Configuration This page allows you to configure how a user is authenticated w
User’s Manual of IGS-10020PT / IGS-10020HPT 247 4.11.3 Network Access Server Configuration This page allows you to configure the IEEE 802.1X and MA
User’s Manual of IGS-10020PT / IGS-10020HPT 248 The page includes the following fields: System Configuration Object Description • Mode Indicates
User’s Manual of IGS-10020PT / IGS-10020HPT 249 the entry. • Hold Time This setting applies to the following modes, i.e. modes using the Port Secu
User’s Manual of IGS-10020PT / IGS-10020HPT 25 1.2 Product Description Environmentally Hardened Design The Industrial 8-Port Gigabit 802.3af/at P
User’s Manual of IGS-10020PT / IGS-10020HPT 250 timeout. The switch follows a set of rules for entering and leaving the Guest VLAN as listed below.
User’s Manual of IGS-10020PT / IGS-10020HPT 251 Force Unauthorized In this mode, the switch will send one EAPOL Failure frame when the port link co
User’s Manual of IGS-10020PT / IGS-10020HPT 252 other clients connected to the port (for instance through a hub) to piggy-back on the successfully
User’s Manual of IGS-10020PT / IGS-10020HPT 253 limited using the Port Security Limit Control functionality. MAC-based Auth. Unlike port-based 80
User’s Manual of IGS-10020PT / IGS-10020HPT 254 the RADIUS-assigned). This option is only available for single-client modes, i.e. • Port-based 802.
User’s Manual of IGS-10020PT / IGS-10020HPT 255 attributes must all be present at least once in the Access-Accept packet. - The switch looks for t
User’s Manual of IGS-10020PT / IGS-10020HPT 256 While in the Guest VLAN, the switch monitors the link for EAPOL frames, and if one such frame is re
User’s Manual of IGS-10020PT / IGS-10020HPT 257 4.11.4 Network Access Overview This page provides an overview of the current NAS port states for th
User’s Manual of IGS-10020PT / IGS-10020HPT 258 If the port is moved to the Guest VLAN, "(Guest)" is appended to the VLAN ID. Read more a
User’s Manual of IGS-10020PT / IGS-10020HPT 259 Read more about Guest VLANs here. Port Counters Object Description • EAPOL Counters These supplic
User’s Manual of IGS-10020PT / IGS-10020HPT26PoE Schedule for Energy SavingUnder the trend of energy saving worldwide and contributing to environ
User’s Manual of IGS-10020PT / IGS-10020HPT 260 Rx Invalid Length dot1xAuthEapLengthErrorFramesRx The number of EAPOL frames that have been recei
User’s Manual of IGS-10020PT / IGS-10020HPT 261 server for this port (left-most table) or client (right-most table). Rx Other Requests dot1xAuthB
User’s Manual of IGS-10020PT / IGS-10020HPT 262 MAC-based: Counts all the backend server packets sent from the switch towards the backend server fo
User’s Manual of IGS-10020PT / IGS-10020HPT 263 Selected Counters Object Description • Selected Counters The Selected Counters table is visible w
User’s Manual of IGS-10020PT / IGS-10020HPT 264 : This button is available in the following modes: • Force Authorized • Force Unauthorized • Port-b
User’s Manual of IGS-10020PT / IGS-10020HPT 265 4.11.6 Authentication Server Configuration This page allows you to configure the Authentication Ser
User’s Manual of IGS-10020PT / IGS-10020HPT 266 The page includes the following fields: Port State These settings are common for all of the Authent
User’s Manual of IGS-10020PT / IGS-10020HPT 267 RADIUS Accounting Server Configuration The table has one row for each RADIUS Accounting Server and
User’s Manual of IGS-10020PT / IGS-10020HPT 268 4.11.7 RADIUS Overview This page provides an overview of the status of the RADIUS servers configura
User’s Manual of IGS-10020PT / IGS-10020HPT 269 expires. The number of seconds left before this occurs is displayed in parentheses. This state is o
User’s Manual of IGS-10020PT / IGS-10020HPT 27 Robust Layer 2 Feafures The IGS-10020PT/HPT can be programmed for advanced switch management functi
User’s Manual of IGS-10020PT / IGS-10020HPT 270 4.11.8 RADIUS Details This page provides detailed statistics for a particular RADIUS server. The
User’s Manual of IGS-10020PT / IGS-10020HPT 271 or invalid) received from the server. Rx Access Rejects radiusAuthClientExtAccessRejects The numb
User’s Manual of IGS-10020PT / IGS-10020HPT 272 reason. Tx Access Requests radiusAuthClientExtAccessRequests The number of RADIUS Access-Request p
User’s Manual of IGS-10020PT / IGS-10020HPT 273 State - Shows the state of the server. It takes one of the following values: Disabled: The select
User’s Manual of IGS-10020PT / IGS-10020HPT 274 an invalid length. Bad authenticators or or unknown types are not included as malformed access resp
User’s Manual of IGS-10020PT / IGS-10020HPT 275 the same server, send to a different server, or give up. A retry to the same server is counted as a
User’s Manual of IGS-10020PT / IGS-10020HPT 276 Buttons Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs
User’s Manual of IGS-10020PT / IGS-10020HPT 277 2. Add New RADIUS Cleint on the Windows 2003 server Figure 4-11-11: Windows Server – Add New RADI
User’s Manual of IGS-10020PT / IGS-10020HPT 278 4. The shared secret key should be the same as the key configured on the Industrial Managed Switch
User’s Manual of IGS-10020PT / IGS-10020HPT 279 Figure 4-11-15: Windows 2003 AD Server Setting Path
User’s Manual of IGS-10020PT / IGS-10020HPT28Perfect Integrafion Solution for Outdoor IP PoE Camera and NVR SystemThe IGS-10020PT/HPT provides 8
User’s Manual of IGS-10020PT / IGS-10020HPT 280 7. Enter ” Active Directory Users and Computers”, create legal user data, the next, right-click a
User’s Manual of IGS-10020PT / IGS-10020HPT 281 Set the Ports Authenticate Status to “Force Authorized” if the port is connected to the RADIUS ser
User’s Manual of IGS-10020PT / IGS-10020HPT 282 4. Select “Authentication” tab. 5. Select “Enable network access control using IEEE 802.1X” to
User’s Manual of IGS-10020PT / IGS-10020HPT 283 9. Enter the user name, password and the logon domain that your account belongs. 10. Click “OK”
User’s Manual of IGS-10020PT / IGS-10020HPT 284 4.12 Security This section is to control the access of the Industrial Managed Switch, including the
User’s Manual of IGS-10020PT / IGS-10020HPT 285 Figure 4-12-1: Port Limit Control Configuration Overview Page Screenshot The page includes the fo
User’s Manual of IGS-10020PT / IGS-10020HPT 286 To understand why aging may be desired, consider the following scenario: Suppose an end-host is con
User’s Manual of IGS-10020PT / IGS-10020HPT 287 Shutdown: If Limit + 1 MAC addresses is seen on the port, shut down the port. This implies that all
User’s Manual of IGS-10020PT / IGS-10020HPT 288 4.12.2 Access Management Configure access management table on this page. The maximum entry number i
User’s Manual of IGS-10020PT / IGS-10020HPT 289 4.12.3 Access Management Statistics This page provides statistics for access management. The Access
User’s Manual of IGS-10020PT / IGS-10020HPT 29 1.4 Product Features Physical Port 8-Port 10/100/1000Base-T Gigabit Ethernet RJ-45 with IEEE 8
User’s Manual of IGS-10020PT / IGS-10020HPT 290 4.12.4 HTTPs Configure HTTPS on this page. The HTTPS Configuration screen in Figure 4-12-4 appears.
User’s Manual of IGS-10020PT / IGS-10020HPT 291 4.12.5 SSH Configure SSH on this page. This page shows the Port Security status. Port Security is a
User’s Manual of IGS-10020PT / IGS-10020HPT 292 4.12.6 Port Security Status This page shows the Port Security status. Port Security is a module wit
User’s Manual of IGS-10020PT / IGS-10020HPT 293 • Abbr A one-letter abbreviation of the user module. This is used in the Users column in the port
User’s Manual of IGS-10020PT / IGS-10020HPT 294 4.12.7 Port Security Detail This page shows the MAC addresses secured by the Port Security module.
User’s Manual of IGS-10020PT / IGS-10020HPT 295 4.12.8 DHCP Snooping DHCP Snooping is used to block intruder on the untrusted ports of DUT when it
User’s Manual of IGS-10020PT / IGS-10020HPT 296 Buttons : Click to save changes. : Click to undo any changes made locally and revert to previously
User’s Manual of IGS-10020PT / IGS-10020HPT 297 • Rx and Tx Release The number of release (option 53 with value 7) packets received and transmitte
User’s Manual of IGS-10020PT / IGS-10020HPT 298 4.12.10 IP Source Guard Configuration IP Source Guard is a secure feature used to restrict IP traff
User’s Manual of IGS-10020PT / IGS-10020HPT 299 packets forwarding that are matched in static entries on the specific port. All means all ports w
User’s Manual of IGS-10020PT / IGS-10020HPT 3 TABLE OF CONTENTS 1. INTRODUCTION ...
User’s Manual of IGS-10020PT / IGS-10020HPT 30 High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous pa
User’s Manual of IGS-10020PT / IGS-10020HPT 300 4.12.12 ARP Inspection ARP Inspection is a secure feature. Several types of attacks can be launched
User’s Manual of IGS-10020PT / IGS-10020HPT 301 Buttons : Click to translate all dynamic entries to static entries. : Click to save changes. : Clic
User’s Manual of IGS-10020PT / IGS-10020HPT 302 4.13 MAC Address Table Switching of frames is based upon the DMAC address contained in the frame. T
User’s Manual of IGS-10020PT / IGS-10020HPT 303 The page includes the following fields: Aging Configuration By default, dynamic entries are removed
User’s Manual of IGS-10020PT / IGS-10020HPT 304 Buttons : Click to add a new entry. : Click to save changes. : Click to undo any changes made local
User’s Manual of IGS-10020PT / IGS-10020HPT 305 The page includes the following fields: Object Description • Type Indicates whether the entry is
User’s Manual of IGS-10020PT / IGS-10020HPT 306 closest next Dynamic ARP Inspection Table match. In addition, the two input fields will - upon a “R
User’s Manual of IGS-10020PT / IGS-10020HPT 307 page" input field. When first visited, the web page will show the first 20 entries from the be
User’s Manual of IGS-10020PT / IGS-10020HPT 308 4.14 LLDP 4.14.1 Link Layer Discovery Protocol Link Layer Discovery Protocol (LLDP) is used to di
User’s Manual of IGS-10020PT / IGS-10020HPT 309 The page includes the following fields: LLDP Parameters Object Description • Tx Interval The swit
User’s Manual of IGS-10020PT / IGS-10020HPT 31 Querier mode support IGMP Snooping port filtering MLD Snooping port filtering MVR (Multi
User’s Manual of IGS-10020PT / IGS-10020HPT 310 from neighbor units is analyzed. Tx only The switch will drop LLDP information received from n
User’s Manual of IGS-10020PT / IGS-10020HPT 311 by this TLV is described in IEEE 802.1AB. • Management Address Optional TLV: When checked the &quo
User’s Manual of IGS-10020PT / IGS-10020HPT 312 The page includes the following fields: Fast Start Repeat Count Object Description • Fast start r
User’s Manual of IGS-10020PT / IGS-10020HPT 313 It is possible to specify the direction to either North of the equator or South of the equator. •
User’s Manual of IGS-10020PT / IGS-10020HPT 314 • City district City division, borough, city district, ward, chou (Japan) • Block (Neighborhood)
User’s Manual of IGS-10020PT / IGS-10020HPT 315 Policies Network Policy Discovery enables the efficient discovery and diagnosis of mismatch issues
User’s Manual of IGS-10020PT / IGS-10020HPT 316 different policy for the voice signaling than for the voice media. This application type should not
User’s Manual of IGS-10020PT / IGS-10020HPT 317 • L2 Priority L2 Priority is the Layer 2 priority to be used for the specified application type. L
User’s Manual of IGS-10020PT / IGS-10020HPT 318 4.14.4 LLDP-MED Neighbor This page provides a status overview for all LLDP-MED neighbors. The dis
User’s Manual of IGS-10020PT / IGS-10020HPT 319 Within the LLDP-MED Endpoint Device category, the LLDP-MED scheme is broken into further Endpoint D
User’s Manual of IGS-10020PT / IGS-10020HPT 32 1.5 Product Specifications Product IGS-10020PT IGS-10020HPT Hardware Specification Copper Po
User’s Manual of IGS-10020PT / IGS-10020HPT 320 communication appliances that directly support the end user. Discovery services defined in this cla
User’s Manual of IGS-10020PT / IGS-10020HPT 321 Video Signaling - for use in network topologies that require a separate policy for the video signal
User’s Manual of IGS-10020PT / IGS-10020HPT 322 4.14.5 Neighbor This page provides a status overview for all LLDP neighbors. The displayed table
User’s Manual of IGS-10020PT / IGS-10020HPT 323 4.14.6 Port Statistics This page provides an overview of all LLDP traffic. Two types of counters ar
User’s Manual of IGS-10020PT / IGS-10020HPT 324 Local Counters The displayed table contains a row for each port. The columns hold the following inf
User’s Manual of IGS-10020PT / IGS-10020HPT 325 4.15 Diagnostics This section provide the Physical layer and IP layer network diagnostics tools for
User’s Manual of IGS-10020PT / IGS-10020HPT 326 4.15.1 Ping This page allows you to issue ICMP PING packets to troubleshoot IP connectivity issues.
User’s Manual of IGS-10020PT / IGS-10020HPT 327 4.15.2 IPv6 Ping This page allows you to issue ICMPv6 PING packets to troubleshoot IPv6 connectivit
User’s Manual of IGS-10020PT / IGS-10020HPT 328 Figure 4-15-3: Remote IP Ping Test Page Screenshot The page includes the following fields: Object
User’s Manual of IGS-10020PT / IGS-10020HPT 329 4.15.4 Cable Diagnostics This page is used for running the Cable Diagnostics. Press to run the diag
User’s Manual of IGS-10020PT / IGS-10020HPT 33 Dimensions (W x D x H) 152 x 107x 72mm Weight 1684g Power Requirements DC 48V Power Consumption 31
User’s Manual of IGS-10020PT / IGS-10020HPT 330 4.16 Power over Ethernet Providing up to 8 PoE, in-line power interfaces, the IGS-10020PT / IGS-100
User’s Manual of IGS-10020PT / IGS-10020HPT 331 10~12 Watts IP Surveillance Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera wit
User’s Manual of IGS-10020PT / IGS-10020HPT 332 4.16.2 System Configuration In a power over Ethernet system, operating power is applied from a powe
User’s Manual of IGS-10020PT / IGS-10020HPT 333 Consumption mode In this mode the ports are shut down when the actual power consumption for all
User’s Manual of IGS-10020PT / IGS-10020HPT 334 Priority mode: System offers PoE power according to per port priority setting when power consump
User’s Manual of IGS-10020PT / IGS-10020HPT 335 4.16.3 Port Configuration This section allows the user to inspect and configure the current PoE por
User’s Manual of IGS-10020PT / IGS-10020HPT 336 named Low, High and Critical. The priority is used in the case when total power consumption has bee
User’s Manual of IGS-10020PT / IGS-10020HPT 337 Figure 4-16-4: PoE Status Screenshot The page includes the following fields: Object Description •
User’s Manual of IGS-10020PT / IGS-10020HPT 338 • Port Status The Port Status shows the port's status. • AF / AT Mode Display per PoE port o
User’s Manual of IGS-10020PT / IGS-10020HPT 339 4.16.5 PoE Schedule The PoE Schedule of the IGS-10020PT / IGS-10020HPT features two advanced PD pow
User’s Manual of IGS-10020PT / IGS-10020HPT 34 QoS Traffic classification based, Strict priority and WRR 8-Level priority for switching - Port Numb
User’s Manual of IGS-10020PT / IGS-10020HPT 340 Powr over Ethernet Schedule Configuration This page allows the user to define PoE schedule. The
User’s Manual of IGS-10020PT / IGS-10020HPT 341 • End Min Allows user to set at what minute that best disables PoE function. • Reboot Enable Allo
User’s Manual of IGS-10020PT / IGS-10020HPT 342 4.16.6 LLDP PoE Neighbours This page provides a status overview for all LLDP PoE neighbors. The dis
User’s Manual of IGS-10020PT / IGS-10020HPT 343 4.16.7 PoE Alive Check Configuration The IGS-10020PT / IGS-10020HPT PoE Switch can be configured to
User’s Manual of IGS-10020PT / IGS-10020HPT 344 • Retry Count (1~5) This column allows user to set how many times system retries ping to PD. For e
User’s Manual of IGS-10020PT / IGS-10020HPT 345 4.17 Loop Protection This page allows the user to inspect the current Loop Protection configuration
User’s Manual of IGS-10020PT / IGS-10020HPT 346 • Shutdown Time The period (in seconds) for which a port will be kept disabled in the event of a l
User’s Manual of IGS-10020PT / IGS-10020HPT 347 • Loops The number of loops detected on this port. • Status The current loop protection status of
User’s Manual of IGS-10020PT / IGS-10020HPT 348 4.18 RMON RMON is the most important expansion of the standard SNMP. RMON is a set of MIB definitio
User’s Manual of IGS-10020PT / IGS-10020HPT 349 framing characters. InUcastPkts: The number of uni-cast packets delivered to a higher-layer prot
User’s Manual of IGS-10020PT / IGS-10020HPT 35 IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet (IGS-10020HPT) RFC 768 UDP RFC 793
User’s Manual of IGS-10020PT / IGS-10020HPT 350 Buttons : Click to add a new community entry. : Click to save changes. : Click to undo any changes
User’s Manual of IGS-10020PT / IGS-10020HPT 351 Buttons Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs
User’s Manual of IGS-10020PT / IGS-10020HPT 352 Buttons : Click to add a new community entry. : Click to save changes. : Click to undo any changes
User’s Manual of IGS-10020PT / IGS-10020HPT 353 4.18.5 RMON History Configuration Configure RMON History table on this page. The entry index key is
User’s Manual of IGS-10020PT / IGS-10020HPT 354 Figure 4-18-6: RMON history overview page screenshot The page includes the following fields: Obje
User’s Manual of IGS-10020PT / IGS-10020HPT 355 Buttons Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs
User’s Manual of IGS-10020PT / IGS-10020HPT 356 Figure 4-18-8 appears. Figure 4-18-8: RMON Statistics Status page screenshot The page includes th
User’s Manual of IGS-10020PT / IGS-10020HPT 357 • 65~127 The total number of packets (including bad packets) received that were from 65 to 127 oct
User’s Manual of IGS-10020PT / IGS-10020HPT 358 4.19 Ring ITU-T G.8032 Ethernet Ring protection switching (ERPS) is a link layer protocol applied o
User’s Manual of IGS-10020PT / IGS-10020HPT 359 4.19.1 MEP Configuration The Maintenance Entity Point instances are configured here; screen in F
User’s Manual of IGS-10020PT / IGS-10020HPT 36 2. INSTALLATION 2.1 Hardware Descriptions The Managed Switch provides three different running speeds
User’s Manual of IGS-10020PT / IGS-10020HPT 360 • Domain Port: This is a MEP in the Port Domain. 'Flow Instance' is a Port. Esp: Future
User’s Manual of IGS-10020PT / IGS-10020HPT 361 Figure 4-19-2: Detail MEP configuration page screenshot The page includes the following fields: I
User’s Manual of IGS-10020PT / IGS-10020HPT 362 • Format This is the configuration of the two possible Maintenance Association Identifier formats.
User’s Manual of IGS-10020PT / IGS-10020HPT 363 Buttons : Click to add a new peer MEP. Functional Configuration Instance Data: Object Descriptio
User’s Manual of IGS-10020PT / IGS-10020HPT 364 in G.8032. • Type R-APS: APS PDU is transmitted as R-APS - this is for ERPS. L-APS: APS PDU is tra
User’s Manual of IGS-10020PT / IGS-10020HPT 365 • Port 1 SF MEP The Port 1 Signal Fail reporting MEP. As only one SF MEP is associated with interc
User’s Manual of IGS-10020PT / IGS-10020HPT 366 Figure 4-19-4: Ethernet Ring Protocol Switch Configuration page screenshot The page includes the
User’s Manual of IGS-10020PT / IGS-10020HPT 367 R-APS messages. The period of the guard timer can be configured in 10 ms steps between 10 ms and 2
User’s Manual of IGS-10020PT / IGS-10020HPT 368 • Protection State ERPS state according to State Transition Tables in G.8032. • Port 0 OK: State
User’s Manual of IGS-10020PT / IGS-10020HPT 369 Figure 4-19-5: Ring Wizard page screenshot The page includes the following fields: Object Descri
User’s Manual of IGS-10020PT / IGS-10020HPT 37 2.1.2 Front Panel Figure 2-1 & 2-2 shows the front panels of Industrial Managed Switch. Figur
User’s Manual of IGS-10020PT / IGS-10020HPT 370 4.19.6 Ring Wizard Example: Figure 4-19-6: Ring Example Diagram The above topology often occurs o
User’s Manual of IGS-10020PT / IGS-10020HPT 371 Setup steps Set ERPS Configuration on Switch 1 Connect PC to switch 1 directly; don’t connect to po
User’s Manual of IGS-10020PT / IGS-10020HPT 372 To avoid loop, please don’t connect switch 1, 2 & 3 together in the ring topology before co
User’s Manual of IGS-10020PT / IGS-10020HPT 373 5. COMMAND LINE INTERFACE 5.1 Accessing the CLI When accessing the management interface for the I
User’s Manual of IGS-10020PT / IGS-10020HPT 374 6. COMMAND LINE MODE The CLI groups all the commands in appropriate modes according to the nature o
User’s Manual of IGS-10020PT / IGS-10020HPT 375 6.1 System Command System Configuration Description: Show system configuration. Syntax: System C
User’s Manual of IGS-10020PT / IGS-10020HPT 376 Example: To display system log information: IGS-10020HPT:/>System log configuration System L
User’s Manual of IGS-10020PT / IGS-10020HPT 377 System Log Server Mode Description: Show or set the system log server mode. Syntax: System Log S
User’s Manual of IGS-10020PT / IGS-10020HPT 378 System Timezone Offset Description: Set or show the system timezone offset. Syntax: System Timezon
User’s Manual of IGS-10020PT / IGS-10020HPT 379 Default Setting: empty Example: To set log server address: IGS-10020HPT:/> log server addre
User’s Manual of IGS-10020PT / IGS-10020HPT 38 Reset Button At the left of the front panel, the reset button is designed for rebooting the Indus
User’s Manual of IGS-10020PT / IGS-10020HPT 380 Parameters: <location>: System location string. (1-255) Use 'clear' or
User’s Manual of IGS-10020PT / IGS-10020HPT 381 Syntax: System DST Mode [disable|recurring|non-recurring] Parameters: disable: Disable Daylight Sa
User’s Manual of IGS-10020PT / IGS-10020HPT 382 all : Show all levels (default) info : Show informations warning : Show warnings error :
User’s Manual of IGS-10020PT / IGS-10020HPT 383 System Reboot Description: Reboot the system. Syntax: System Reboot Example: To reboot device w
User’s Manual of IGS-10020PT / IGS-10020HPT 384 System Load Description: Show current CPU load: 100ms, 1s and 10s running average (in percent, zero
User’s Manual of IGS-10020PT / IGS-10020HPT 385 6.2 IP Command IP Configuration Description: Show IP configuration. Syntax: IP Configuration Ex
User’s Manual of IGS-10020PT / IGS-10020HPT 386 Parameters: enable : Enable or renew DHCP client disable: Disable DHCP client Default Setting: Dis
User’s Manual of IGS-10020PT / IGS-10020HPT 387 IP Ping Description: Ping IP address (ICMP echo). Syntax: IP Ping <ip_addr_string> [(Length
User’s Manual of IGS-10020PT / IGS-10020HPT 388 IP DNS Proxy Description: Set or show the IP DNS Proxy mode. Syntax: IP DNS_Proxy [enable|disable]
User’s Manual of IGS-10020PT / IGS-10020HPT 389 IPv6 Setup Description: Set or show the IPv6 setup. Syntax: IP IPv6 Setup [<ipv6_addr>] [<
User’s Manual of IGS-10020PT / IGS-10020HPT 39 Per 10/100/1000Mbps port with PoE LED Color Function 10/100/1000 LNK/ACT Green Lights to indica
User’s Manual of IGS-10020PT / IGS-10020HPT 390 Parameters: <ipv6_addr>: IPv6 address is in 128-bit records represented as eight fields of u
User’s Manual of IGS-10020PT / IGS-10020HPT 391 IP NTP Configuration Default Setting: IP NTP Configuration: ===================== NTP Mode : Disa
User’s Manual of IGS-10020PT / IGS-10020HPT 392 IP NTP Server Add Description: Add NTP server entry. Syntax: IP NTP Server Add <server_index>
User’s Manual of IGS-10020PT / IGS-10020HPT 393 IP NTP Server Delete Description: Delete NTP server entry. Syntax: IP NTP Server Delete <server
User’s Manual of IGS-10020PT / IGS-10020HPT 394 6.3 Port Management Command Port Configuration Description: Show port configuration. Syntax: Por
User’s Manual of IGS-10020PT / IGS-10020HPT 395 Parameters: <port_list>: Port list or 'all', default: All ports auto : Auto n
User’s Manual of IGS-10020PT / IGS-10020HPT 396 Port State Description: Set or show the port administrative state. Syntax: Port State [<port_li
User’s Manual of IGS-10020PT / IGS-10020HPT 397 Port Power Description: Set or show the port PHY power mode. Syntax: Port Power [<port_list>
User’s Manual of IGS-10020PT / IGS-10020HPT 398 Example: IGS-10020HPT:/>port excessive 1 restart Port Statistics Description: Show port stat
User’s Manual of IGS-10020PT / IGS-10020HPT 399 Port SFP Description: Show SFP port information. Syntax: Port SFP [<port_list>] Parameters:
User’s Manual of IGS-10020PT / IGS-10020HPT 4 4. WEB CONFIGURATION ...
User’s Manual of IGS-10020PT / IGS-10020HPT 40 2.1.4 Wiring the Power Input The 6-contact terminal block connector on the top panel of the Industri
User’s Manual of IGS-10020PT / IGS-10020HPT 400 6.4 MAC Address Table Command MAC Configuration Description: Show MAC address table configuration.
User’s Manual of IGS-10020PT / IGS-10020HPT 401 Add MAC address table entry. Syntax: MAC Add <mac_addr> <port_list> [<vid>] Para
User’s Manual of IGS-10020PT / IGS-10020HPT 402 Parameters: <mac_addr>: MAC address (xx-xx-xx-xx-xx-xx) <vid> : VLAN ID (1-4095), d
User’s Manual of IGS-10020PT / IGS-10020HPT 403 disable: Disable learning secure : Secure learning (default: Show learn mode) Default Setting: Auto
User’s Manual of IGS-10020PT / IGS-10020HPT 404 MAC Statistics Description: Show MAC address table statistics. Syntax: MAC Statistics [<port_li
User’s Manual of IGS-10020PT / IGS-10020HPT 405 6.5 VLAN Configuration Command VLAN Configuration Description: Show VLAN configuration. Syntax: VL
User’s Manual of IGS-10020PT / IGS-10020HPT 406 VLAV PVID Description: Set or show the port VLAN ID. Syntax: VLAN PVID [<port_list>] [<vid
User’s Manual of IGS-10020PT / IGS-10020HPT 407 IGS-10020HPT:/>vlan frametype 10 tagged VLAN Ingress Filter Description: Set or show the port
User’s Manual of IGS-10020PT / IGS-10020HPT 408 IEEE 802.1Q Example: Set VLAN mode in port base IGS-10020HPT:/>vlan mode portbased VLAN L
User’s Manual of IGS-10020PT / IGS-10020HPT 409 Parameters: <port_list>: Port list or 'all', default: All ports disable : Disab
User’s Manual of IGS-10020PT / IGS-10020HPT 41 2.1.5 Wiring the Fault Alarm Contact The fault alarm contacts are in the middle (3 & 4) of the t
User’s Manual of IGS-10020PT / IGS-10020HPT 410 Syntax: VLAN untagVID [<port_list>] [<untagvid>] Parameters: <port_list>: Port l
User’s Manual of IGS-10020PT / IGS-10020HPT 411 Parameters: <vid>|<name>: VLAN ID (1-4095) or VLAN Name <port_list> : Port list o
User’s Manual of IGS-10020PT / IGS-10020HPT 412 VLAN Forbidden Lookup Description: Lookup VLAN Forbidden port entry. Syntax: VLAN Forbidden Lookup
User’s Manual of IGS-10020PT / IGS-10020HPT 413 VID VLAN Name Ports ---- -------------------------------- ----- 1
User’s Manual of IGS-10020PT / IGS-10020HPT 414 VLAN Name Lookup Description: Show VLAN Name table. Syntax: VLAN Name Lookup [<name>] Param
User’s Manual of IGS-10020PT / IGS-10020HPT 415 Promiscous Example: Show VLAN configuration of port10 IGS-10020HPT:/>status 1 Port VLAN U
User’s Manual of IGS-10020PT / IGS-10020HPT 416 6.6 Private VLAN Configuration Command PVLAN Configuration Description: Show Private VLAN configura
User’s Manual of IGS-10020PT / IGS-10020HPT 417 PVLAN Add Description: Add or modify Private VLAN entry. Syntax: PVLAN Add <pvlan_id> [<p
User’s Manual of IGS-10020PT / IGS-10020HPT 418 PVLAN Lookup [<pvlan_id>] Parameters: <pvlan_id>: Private VLAN ID, default: Show all P
User’s Manual of IGS-10020PT / IGS-10020HPT 419 6.7 Security Command Security Switch User Configuration Description: Show users configuration. Syn
User’s Manual of IGS-10020PT / IGS-10020HPT 42 2.1.6 Wiring the Digital Input / Output The 6-contact terminal block connector on the rear panel of
User’s Manual of IGS-10020PT / IGS-10020HPT 420 Example: Add new user: username: test, password: test & privilege: 10 IGS-10020HPT:/>sec
User’s Manual of IGS-10020PT / IGS-10020HPT 421 Parameters: <group_name>: Privilege group name <cro> : Configuration read-only p
User’s Manual of IGS-10020PT / IGS-10020HPT 422 Client Authentication Method Local Authentication Fallback ------- ----------------------
User’s Manual of IGS-10020PT / IGS-10020HPT 423 Security Switch SSH Configuration Description: Show SSH configuration. Syntax: Security Switch SSH
User’s Manual of IGS-10020PT / IGS-10020HPT 424 Security Switch HTTPs Configuration Description: Show HTTPS configuration. Syntax: Security Switch
User’s Manual of IGS-10020PT / IGS-10020HPT 425 Security Switch HTTPs Redirect Description: Set or show the HTTPS redirect mode. Automatic redirect
User’s Manual of IGS-10020PT / IGS-10020HPT 426 Security Switch Access Mode Description: Set or show the access management mode. Syntax: Security
User’s Manual of IGS-10020PT / IGS-10020HPT 427 IGS-10020HPT:/>security switch access add 1 192.168.0.1 192.168.0.200 web Security Switch Acce
User’s Manual of IGS-10020PT / IGS-10020HPT 428 Syntax: Security Switch Access Delete <access_id> Parameters: <access_id>: entry index
User’s Manual of IGS-10020PT / IGS-10020HPT 429 Security Switch Access Statistics Description: Show or clear access management statistics. Syntax:
User’s Manual of IGS-10020PT / IGS-10020HPT 43 Figure 2-8 Wires DI0 and DI1 to Open Detector 4. There are two Digital Output groups for you to s
User’s Manual of IGS-10020PT / IGS-10020HPT 430 Parameters: enable : Enable SNMP disable: Disable SNMP (default: Show SNMP mode) Default Setting:
User’s Manual of IGS-10020PT / IGS-10020HPT 431 Syntax: Security Switch SNMP Read Community [<community>] Parameters: <community>: Com
User’s Manual of IGS-10020PT / IGS-10020HPT 432 Syntax: Security Switch SNMP Trap Mode [enable|disable] Parameters: enable : Enable SNMP traps dis
User’s Manual of IGS-10020PT / IGS-10020HPT 433 Security Switch SNMP Trap Community Description: Set or show the community string for SNMP traps.
User’s Manual of IGS-10020PT / IGS-10020HPT 434 Set or Show the SNMP trap destination IPv6 address. Syntax: Security Switch SNMP Trap IPv6 Destina
User’s Manual of IGS-10020PT / IGS-10020HPT 435 Security Switch SNMP Trap Link-up Description: Set or show the port link-up and link-down trap mode
User’s Manual of IGS-10020PT / IGS-10020HPT 436 IGS-10020HPT:/>security switch snmp trap inform mode disable Security Switch SNMP Trap Inform
User’s Manual of IGS-10020PT / IGS-10020HPT 437 IGS-10020HPT:/>security switch snmp trap inform retry times 10 Security Switch SNMP Trap Probe
User’s Manual of IGS-10020PT / IGS-10020HPT 438 Security Switch SNMP Trap Security Name Description: Set or show SNMP trap security name. Syntax:
User’s Manual of IGS-10020PT / IGS-10020HPT 439 Add or modify SNMPv3 community entry. The entry index key is <community>. Syntax: Security S
User’s Manual of IGS-10020PT / IGS-10020HPT 44 2.2 Install the Industrial Managed Switch This section describes how to install the Industrial Manag
User’s Manual of IGS-10020PT / IGS-10020HPT 440 Parameters: <index>: entry index (1-64) Example: Lookup SNMPv3 community entry IGS-10020H
User’s Manual of IGS-10020PT / IGS-10020HPT 441 IGS-10020HPT:/>security switch snmp user add 800007e5017f000003 admin_snmpv3 md5 12345678 des ab
User’s Manual of IGS-10020PT / IGS-10020HPT 442 87654321 12345678 Security Switch SNMP User Lookup Description: Lookup SNMPv3 user entry. Syntax
User’s Manual of IGS-10020PT / IGS-10020HPT 443 <group_name> : A string identifying the group name that this entry should belong to. The a
User’s Manual of IGS-10020PT / IGS-10020HPT 444 --- ----- -------------------------------- -------------------------------- 1 v1 public
User’s Manual of IGS-10020PT / IGS-10020HPT 445 Parameters: <index>: entry index (1-64) Example: Delete SNMPv3 view entry IGS-10020HPT:/&g
User’s Manual of IGS-10020PT / IGS-10020HPT 446 Parameters: <group_name> : A string identifying the group name that this entry should be
User’s Manual of IGS-10020PT / IGS-10020HPT 447 IGS-10020HPT:/>security switch snmp access delete 3 Security Switch SNMP Access Lookup Descrip
User’s Manual of IGS-10020PT / IGS-10020HPT 448 Security Switch RMON Statistics Delete Description: Delete RMON Statistics entry. The entry index k
User’s Manual of IGS-10020PT / IGS-10020HPT 449 Security Switch RMON History Delete Description: Delete RMON Hisotry entry. The entry index key is
User’s Manual of IGS-10020PT / IGS-10020HPT 45 2.2.2 DIN-Rail Mounting This section describes how to install the Industrial Managed Switch. There
User’s Manual of IGS-10020PT / IGS-10020HPT 450 .1.3.6.1.2.1.2.2.1.13.xxx – ifInDiscards .1.3.6.1.2.1.2.2.1.14.xxx – ifInErrors .1.3.6.1.2.1.2.2.1.
User’s Manual of IGS-10020PT / IGS-10020HPT 451 Syntax: Security Switch RMON Alarm Lookup [<alarm_id>] Parameters: <alarm_id>: Alarm I
User’s Manual of IGS-10020PT / IGS-10020HPT 452 Show RMON Event entries. Syntax: Security Switch RMON Event Lookup [<event_id>] Parameters:
User’s Manual of IGS-10020PT / IGS-10020HPT 453 10 ---- No users 0 Security Network Psec Port Description: Show MAC Addresses
User’s Manual of IGS-10020PT / IGS-10020HPT 454 IGS-10020HPT:/>security network limit configuration Port Security Limit Control Configuration:
User’s Manual of IGS-10020PT / IGS-10020HPT 455 Enable the limit mode IGS-10020HPT:/>security network limit mode enable Security Network Lim
User’s Manual of IGS-10020PT / IGS-10020HPT 456 Example: Set age time in 100sec. IGS-10020HPT:/>security network limit agetime 100 Securit
User’s Manual of IGS-10020PT / IGS-10020HPT 457 Default Setting: 4 Example: Set limit in 5 IGS-10020HPT:/>security network limit limit 1-10
User’s Manual of IGS-10020PT / IGS-10020HPT 458 Security Network Limit Reopen [<port_list>] Parameters: <port_list>: Port list or &apo
User’s Manual of IGS-10020PT / IGS-10020HPT 459 Allow Guest VLAN if EAPOL Frame Seen: Disabled Port Admin State Port State La
User’s Manual of IGS-10020PT / IGS-10020HPT 46 Step 3: Check if the DIN-Rail is tightly on the track. Please refer to following procedures to remo
User’s Manual of IGS-10020PT / IGS-10020HPT 460 authorized : Port access is allowed unauthorized: Port access is not allowed single : Single
User’s Manual of IGS-10020PT / IGS-10020HPT 461 Security Network NAS ReauthPeriod Description: Set or show either global enabledness (use the globa
User’s Manual of IGS-10020PT / IGS-10020HPT 462 Set the time between EAPOL retransmissions for 100sec. IGS-10020HPT:/>security network nas eap
User’s Manual of IGS-10020PT / IGS-10020HPT 463 Example: Set NAS hold time in 100sec IGS-10020HPT:/>security network nas holdtime 100 Secu
User’s Manual of IGS-10020PT / IGS-10020HPT 464 <port_list>: Select the per-port RADIUS-assigned VLAN setting (default: Show current per-port
User’s Manual of IGS-10020PT / IGS-10020HPT 465 Default Setting: Disable Example: Enable NAS guest VLAN IGS-10020HPT:/>security network nas
User’s Manual of IGS-10020PT / IGS-10020HPT 466 Example: Show 802.1X statistics in port 1 IGS-10020HPT:/>security network nas statistics 1 P
User’s Manual of IGS-10020PT / IGS-10020HPT 467 Parameters: <port_list> : Port list or 'all', default: All ports permit :
User’s Manual of IGS-10020PT / IGS-10020HPT 468 Security Network ACL Rate Description: Set or show the ACL rate limiter. Syntax: Security Network
User’s Manual of IGS-10020PT / IGS-10020HPT 469 Parameters: <ace_id> : ACE ID (1-256), default: Next available ID <ace_id_next> :
User’s Manual of IGS-10020PT / IGS-10020HPT 47 2.2.3 Wall Mount Plate Mounting To install the Industrial Managed Switch on the wall, please follow
User’s Manual of IGS-10020PT / IGS-10020HPT 470 Security Network ACL Delete Description: Delete ACE. Syntax: Security Network ACL Delete <ace_i
User’s Manual of IGS-10020PT / IGS-10020HPT 471 Example: Clear all ACL counters. IGS-10020HPT:/>security network acl clear Security Networ
User’s Manual of IGS-10020PT / IGS-10020HPT 472 DHCP Relay Configuration: ========================= DHCP Relay Mode : Disabled DHCP
User’s Manual of IGS-10020PT / IGS-10020HPT 473 Syntax: Security Network DHCP Relay Server [<ip_addr>] Parameters: <ip_addr>: IP addre
User’s Manual of IGS-10020PT / IGS-10020HPT 474 Security Network DHCP Relay Information Policy Description: Set or show the DHCP relay mode. When e
User’s Manual of IGS-10020PT / IGS-10020HPT 475 Security Network DHCP Snooping Configuration Description: Show DHCP snooping configuration. Syntax
User’s Manual of IGS-10020PT / IGS-10020HPT 476 Parameters: <port_list>: Port list or 'all', default: All ports trusted : Configure
User’s Manual of IGS-10020PT / IGS-10020HPT 477 Rx Lease Query: 0 Tx Lease Query: 0 Rx Lease Unassigned
User’s Manual of IGS-10020PT / IGS-10020HPT 478 Syntax: Security Network IP Source Guard Port Mode [<port_list>] [enable|disable] Parameters
User’s Manual of IGS-10020PT / IGS-10020HPT 479 Security Network IP Source Guard Entry Description: Add or delete IP source guard static entry. Sy
User’s Manual of IGS-10020PT / IGS-10020HPT 48 2.3 Cabling 10/100/1000Base-T and 100Base-FX / 1000Base-SX/LX All 10/100/1000Base-T ports come
User’s Manual of IGS-10020PT / IGS-10020HPT 480 Security Network IP Source Guard Translation Description: Translate IP source guard dynamic entries
User’s Manual of IGS-10020PT / IGS-10020HPT 481 IGS-10020HPT:/>security network arp inspection mode enable Security Network ARP Inspection Por
User’s Manual of IGS-10020PT / IGS-10020HPT 482 <allowed_ip> : IP address (a.b.c.d), IP address allowed for doing ARP request Example: A
User’s Manual of IGS-10020PT / IGS-10020HPT 483 Example: Show Auth configuration. IGS-10020HPT:/>security aaa configuration AAA Configuration
User’s Manual of IGS-10020PT / IGS-10020HPT 484 5 Disabled 49 Security AAA Timeout Des
User’s Manual of IGS-10020PT / IGS-10020HPT 485 Set 1000sec for server dead time IGS-10020HPT:/>security aaa deadtime 1000 Security AAA RADI
User’s Manual of IGS-10020PT / IGS-10020HPT 486 The server index (1-5) (default: Show RADIUS accounting server configuration) enable : Enable
User’s Manual of IGS-10020PT / IGS-10020HPT 487 IGS-10020HPT:/>security aaa tacacs+ 1 enable 192.168.0.20 12345678 49 Security AAA Statistics
User’s Manual of IGS-10020PT / IGS-10020HPT 488 6.8 Spanning Tree Protocol Command STP Configuration Description: Show STP configuration. Syntax:
User’s Manual of IGS-10020PT / IGS-10020HPT 489 Example: Set the STP Bridge protocol version. IGS-10020HPT:/> stp version rstp STP Tx Hold
User’s Manual of IGS-10020PT / IGS-10020HPT 49 2.3.1 Installing the SFP Transceiver The sections describe how to insert an SFP transceiver into a
User’s Manual of IGS-10020PT / IGS-10020HPT 490 Set STP maximum hops in 25 IGS-10020HPT:/>stp maxhops 25 STP MaxAge Description: Set or show
User’s Manual of IGS-10020PT / IGS-10020HPT 491 IGS-10020HPT:/>stp fwddelay 25 STP CName Description: Set or Show MSTP configuration name and
User’s Manual of IGS-10020PT / IGS-10020HPT 492 Example: Set edge port BPDU filtering IGS-10020HPT:/>stp bpdufilter enable STP BPDU Guard
User’s Manual of IGS-10020PT / IGS-10020HPT 493 Example: Set STP recovery value in 30 sec. IGS-10020HPT:/>stp recovery 30 STP Status Descr
User’s Manual of IGS-10020PT / IGS-10020HPT 494 STP MSTI Priority Description: Set or show the bridge instance priority. Syntax: STP Msti Priority
User’s Manual of IGS-10020PT / IGS-10020HPT 495 STP MSTI Add Description: Add a VLAN to a MSTI. Syntax: STP Msti Add <msti> <vid> Par
User’s Manual of IGS-10020PT / IGS-10020HPT 496 STP Port Mode Description: Set or show the STP enabling for a port. Syntax: STP Port Mode [<por
User’s Manual of IGS-10020PT / IGS-10020HPT 497 IGS-10020HPT:/>stp port edge 1 enable STP Port AutoEdge Description: Set or show the STP autoE
User’s Manual of IGS-10020PT / IGS-10020HPT 498 Default: auto Example: Disable STP P2P function on port1 IGS-10020HPT:/>stp port p2p 1 disa
User’s Manual of IGS-10020PT / IGS-10020HPT 499 Parameters: <port_list>: Port list or 'all', default: All ports enable : Enable
User’s Manual of IGS-10020PT / IGS-10020HPT 5 4.4 Port Management ...
User’s Manual of IGS-10020PT / IGS-10020HPT 50 MGB-TSX SFP-Port 1000Base-SX mini-GBIC module - 550m (-40~75 degrees C) MGB-TLX SFP-Port 1000Base-LX
User’s Manual of IGS-10020PT / IGS-10020HPT 500 Syntax: STP Port Statistics [<port_list>] [clear] Parameters: <port_list>: Port list or
User’s Manual of IGS-10020PT / IGS-10020HPT 501 <port_list>: Port list or 'all', default: All ports Default: auto STP MSTI Port C
User’s Manual of IGS-10020PT / IGS-10020HPT 502 <port_list>: Port list or 'all'. Port zero means aggregations. <priority> : S
User’s Manual of IGS-10020PT / IGS-10020HPT 503 6.9 Link Aggregation Command Aggregation Configuration Description: Show link aggregation configura
User’s Manual of IGS-10020PT / IGS-10020HPT 504 Example: Delete Group2 IGS-10020HPT:/>aggr delete 2 Aggregation Lookup Description: Lookup
User’s Manual of IGS-10020PT / IGS-10020HPT 505 Example: Disable SMAC mode IGS-10020HPT:/>Aggr mode smac disable
User’s Manual of IGS-10020PT / IGS-10020HPT 506 6.10 Link Aggregation Control Protocol Command LACP Configuration Description: Show LACP configurat
User’s Manual of IGS-10020PT / IGS-10020HPT 507 <port_list>: Port list or 'all', default: All ports enable : Enable LACP protocol d
User’s Manual of IGS-10020PT / IGS-10020HPT 508 Parameters: <port_list>: Port list or 'all', default: All ports <prio> :
User’s Manual of IGS-10020PT / IGS-10020HPT 509 Example: Set passive for port1~4 IGS-10020HPT:/>lacp role 1-4 passive LACP Status Descript
User’s Manual of IGS-10020PT / IGS-10020HPT 51 To connect to MFB-FX SFP transceiver, use the multi-mode fiber cable with one side being the male
User’s Manual of IGS-10020PT / IGS-10020HPT 510 Example: Show LACP statistics of port1~4 IGS-10020HPT:/>lacp statistics 1-4 Port Rx Frames
User’s Manual of IGS-10020PT / IGS-10020HPT 511 6.11 LLDP Command LLDP Configuration Description: Show LLDP configuration. Syntax: LLDP Configurat
User’s Manual of IGS-10020PT / IGS-10020HPT 512 Parameters: <port_list>: Port list or 'all', default: All ports enable : Enable LLD
User’s Manual of IGS-10020PT / IGS-10020HPT 513 System capabilities: Enable Master's IP address: Enable Example: Disable descri
User’s Manual of IGS-10020PT / IGS-10020HPT 514 Example: Set LLDP hold value in 10 IGS-10020HPT:/>lldp hold 10 LLDP Delay Description: Set
User’s Manual of IGS-10020PT / IGS-10020HPT 515 Example: Set LLDP reinit delay value in 3 IGS-10020HPT:/>lldp reinit 3 LLDP Statistics Des
User’s Manual of IGS-10020PT / IGS-10020HPT 516 Syntax: LLDP Info [<port_list>] Parameters: <port_list>: Port list or 'all',
User’s Manual of IGS-10020PT / IGS-10020HPT 517 6.12 LLDP MED Command LLDP MED Configuration Description: Show LLDP-MED configuration. Syntax: LLD
User’s Manual of IGS-10020PT / IGS-10020HPT 518 Syntax: LLDPMED Civic [country|state|county|city|district|block|street|leading_street_direction|tra
User’s Manual of IGS-10020PT / IGS-10020HPT 519 Syntax: LLDPMED ecs [<ecs_value>] Parameters: <ecs_value>: lldpmed The value for the E
User’s Manual of IGS-10020PT / IGS-10020HPT 52 3. SWITCH MANAGEMENT This chapter explains the methods that you can use to configure management acce
User’s Manual of IGS-10020PT / IGS-10020HPT 520 visitors with their own IP Telephony handsets and other similar appliances supporting interactive v
User’s Manual of IGS-10020PT / IGS-10020HPT 521 Syntax: LLDPMED Coordinates [latitude|longitude|altitude] [north|south|west|east|meters|floor] [coo
User’s Manual of IGS-10020PT / IGS-10020HPT 522 Syntax: LLDPMED Fast [<count>] Parameters: <count>: The number of times the fast start
User’s Manual of IGS-10020PT / IGS-10020HPT 523 6.13 EEE Command EEE Configuration Description: Show eee configuration. Syntax: EEE Configuration
User’s Manual of IGS-10020PT / IGS-10020HPT 524 disable: Disable EEE (default: Show eee mode) Default Setting: Disabled Example: Enable EEE m
User’s Manual of IGS-10020PT / IGS-10020HPT 525 6.14 Thermal Command Thermal Prio_temp Description: Set or show the temperature at which the ports
User’s Manual of IGS-10020PT / IGS-10020HPT 526 Thermal Configuration Description: Show thermal_protect configuration. Syntax: Thermal config
User’s Manual of IGS-10020PT / IGS-10020HPT 527 6.15 PoE Command PoE Configuration Description: Show PoE configuration. Syntax: PoE Configuration
User’s Manual of IGS-10020PT / IGS-10020HPT 528 Parameters: <port_list>: Port list or 'all', default: All ports low : Set prior
User’s Manual of IGS-10020PT / IGS-10020HPT 529 Syntax: PoE Power_Supply [<supply_power>] Parameters: <supply_power>: PoE power for a
User’s Manual of IGS-10020PT / IGS-10020HPT 53 3.2 Management Access Overview The Industrial Managed Switch gives you the flexibility to access and
User’s Manual of IGS-10020PT / IGS-10020HPT 530 6.16 Ethernet Virtual Connections Command EVC Configuration Description: Show EVC configuration. S
User’s Manual of IGS-10020PT / IGS-10020HPT 531 EVC Port Addr Description: Set or show port address match mode. Syntax: EVC Port Addr [<port_li
User’s Manual of IGS-10020PT / IGS-10020HPT 532 enable : Enable policer disable : Disable policer <policer_mode>: Policer_mode:
User’s Manual of IGS-10020PT / IGS-10020HPT 533 Syntax: EVC Delete <evc_id> Parameters: <evc_id>: EVC ID (1-128) EVC Lookup Descript
User’s Manual of IGS-10020PT / IGS-10020HPT 534 Parameters: <port_list> : Port list or 'all', default: All ports <class_list>
User’s Manual of IGS-10020PT / IGS-10020HPT 535 <fragment> : IPv4 fragment: any|fragment|non-fragment <sport> : UDP/TCP source p
User’s Manual of IGS-10020PT / IGS-10020HPT 536 Syntax: EVC ECE Lookup [<ece_id>] Parameters: <ece_id>: ECE ID (1-128) EVC ECE Statu
User’s Manual of IGS-10020PT / IGS-10020HPT 537 6.17 Ethernet Protection Switching Command EPS Create Description: EPS create. Syntax: EPS create
User’s Manual of IGS-10020PT / IGS-10020HPT 538 unidir|bidir : Unidirectional or bidirectional switching w0s|w10s|w30s|w1m|w5
User’s Manual of IGS-10020PT / IGS-10020HPT 539 6.18 Maintainence entity End Point Command MEP Config Description: MEP instance configuration &apos
User’s Manual of IGS-10020PT / IGS-10020HPT 54 3.3 CLI Mode Management There are two ways for CLI mode management, one is remote telnet, and the ot
User’s Manual of IGS-10020PT / IGS-10020HPT 540 MEP Peer MEP Description: MEP Peer MEP id configuration. Syntax: MEP peer MEP [<inst>] [<
User’s Manual of IGS-10020PT / IGS-10020HPT 541 'flr' is the Frame Loss Ratio time interval. Syntax: MEP lm config [<inst>] [<p
User’s Manual of IGS-10020PT / IGS-10020HPT 542 'domport|domevc' is the client domain - must be EVC 'level' is the client MEG l
User’s Manual of IGS-10020PT / IGS-10020HPT 543 MEP LCK configuration 'prio' is the priority (PCP) of transmitted AIS frame '1s|1m&a
User’s Manual of IGS-10020PT / IGS-10020HPT 544 MEP Loop Back configuration 'set|clear' is set or clear of DEI of transmitted LBM frame &
User’s Manual of IGS-10020PT / IGS-10020HPT 545 'us|ns' calculation results are shown in micro or nano seconds 'keep|reset' the
User’s Manual of IGS-10020PT / IGS-10020HPT 546 Parameters: <inst> : Instance number set|clear : OAM DEI set/clear
User’s Manual of IGS-10020PT / IGS-10020HPT 547 Syntax: MEP lm clear <inst> Parameters: <inst> : Instance number MEP Link Tra
User’s Manual of IGS-10020PT / IGS-10020HPT 548 MEP Delay Measurement State Clear Description: MEP Delay Measurement state clear Syntax: MEP dm cl
User’s Manual of IGS-10020PT / IGS-10020HPT 549 6.19 Quality of Service Command QoS Configuration Description: Show QoS Configuration. Syntax: QoS
User’s Manual of IGS-10020PT / IGS-10020HPT 55 Figure 3-2: Remote Telnet Interface Main Screen of Industrial Managed Switch For more information
User’s Manual of IGS-10020PT / IGS-10020HPT 550 QoS Port Classification DPL Description: Set or show the default Drop Precedence Level. Syntax: Qo
User’s Manual of IGS-10020PT / IGS-10020HPT 551 QoS Port Classification DEI Description: Set or show the default DEI for an untagged frame. Syntax
User’s Manual of IGS-10020PT / IGS-10020HPT 552 IGS-10020HPT:/>qos Port Classification tag 1-10 enable QoS Port Classification Map Description
User’s Manual of IGS-10020PT / IGS-10020HPT 553 IGS-10020HPT:/>qos Port Classification dscp 1-10 enable QoS Port Policer Mode Description: Set
User’s Manual of IGS-10020PT / IGS-10020HPT 554 Example: Set the port policer rate in 1000 IGS-10020HPT:/>qos Port Policer Rate 1-10 1000
User’s Manual of IGS-10020PT / IGS-10020HPT 555 enable : Enable port policer flow control disable : Disable port policer flow control (defau
User’s Manual of IGS-10020PT / IGS-10020HPT 556 Default Setting: 500 QoS Port Scheduler Mode Description: Set or show the port scheduler mode. S
User’s Manual of IGS-10020PT / IGS-10020HPT 557 QoS Port QueueShaper Mode Description: Set or show the port queue shaper mode. Syntax: QoS Port Qu
User’s Manual of IGS-10020PT / IGS-10020HPT 558 Example: Set the port queue shaper rate in 1000 IGS-10020HPT:/>qos Port QueueShaper rate 1-1
User’s Manual of IGS-10020PT / IGS-10020HPT 559 default : Use default PCP/DEI values mapped : Use mapped versions of QoS class and DP level (d
User’s Manual of IGS-10020PT / IGS-10020HPT 56 3.4 Web Management The Industrial Managed Switch offers management features that allow users to mana
User’s Manual of IGS-10020PT / IGS-10020HPT 560 Parameters: <port_list>: Port list or 'all', default: All ports <dei> :
User’s Manual of IGS-10020PT / IGS-10020HPT 561 Parameters: <port_list>: Port list or 'all', default: All ports enable : Enable
User’s Manual of IGS-10020PT / IGS-10020HPT 562 QoS Port DSCP EgressRemark Description: Set or show the port DSCP remarking mode. Syntax: QoS Port
User’s Manual of IGS-10020PT / IGS-10020HPT 563 QoS DSCP Translation Description: Set or show global ingress DSCP translation table. If port DSCP t
User’s Manual of IGS-10020PT / IGS-10020HPT 564 If port DSCP classification is 'selected', DSCP will be classified based on QoS class and
User’s Manual of IGS-10020PT / IGS-10020HPT 565 Parameters: enable : Enable unicast storm control disable : Disable unicast storm contro
User’s Manual of IGS-10020PT / IGS-10020HPT 566 Syntax: QoS Storm Broadcast [enable|disable] [<packet_rate>] Parameters: enable : Enab
User’s Manual of IGS-10020PT / IGS-10020HPT 567 <etype> : Ethernet Type: 0x600-0xFFFF or 'any' but excluding 0x800(IPv4) a
User’s Manual of IGS-10020PT / IGS-10020HPT 568 QoS QCL Lookup Description: Lookup QoS Control List. Syntax: QoS QCL Lookup [<qce_id>] Para
User’s Manual of IGS-10020PT / IGS-10020HPT 569 Syntax: QoS QCL refresh Parameters: combined|static|voice_vlan|conflicts: combined : Shows
User’s Manual of IGS-10020PT / IGS-10020HPT 57 3.5 SNMP-Based Network Management You can use an external SNMP-based application to configure and
User’s Manual of IGS-10020PT / IGS-10020HPT 570 6.20 Mirror Command Mirror Configuration Description: Show mirror configuration. Syntax: Mirror Co
User’s Manual of IGS-10020PT / IGS-10020HPT 571 Mirror Mode Description: Set or show the mirror mode. Syntax: Mirror Mode [<port_list>] [ena
User’s Manual of IGS-10020PT / IGS-10020HPT 572 6.21 Configuration Command Configuration Save Description: Save configuration to TFTP server. Synt
User’s Manual of IGS-10020PT / IGS-10020HPT 573 6.22 Firmware Command Firmware Load Description: Load new firmware from TFTP server. Syntax: Firmw
User’s Manual of IGS-10020PT / IGS-10020HPT 574 Firmware Swap Description: Activate the alternate firmware image.. Syntax: Firmware Swap
User’s Manual of IGS-10020PT / IGS-10020HPT 575 6.23 UPnP Command UPnP Configuration Description: Show UPnP configuration. Syntax: UPnP Configurat
User’s Manual of IGS-10020PT / IGS-10020HPT 576 IGS-10020HPT:/>upnp mode enable UPnP TTL Description: Set or show the TTL value of the IP head
User’s Manual of IGS-10020PT / IGS-10020HPT 577 6.24 MVR Command MVR Configuration Description: Show the MVR configuration. Syntax: MVR Configurat
User’s Manual of IGS-10020PT / IGS-10020HPT 578 Parameters: enable : Enable MVR mode disable : Disable MVR mode (default: Show MVR mode)
User’s Manual of IGS-10020PT / IGS-10020HPT 579 dynamic : Dynamic MVR mode compatible: Compatible MVR mode (default: Show MVR VLAN mode) MVR VL
User’s Manual of IGS-10020PT / IGS-10020HPT 58 3.6 PLANET Smart Discovery Utility For easily listing the Industrial Managed Switch in your Ethernet
User’s Manual of IGS-10020PT / IGS-10020HPT 580 MVR VLAN Channel Description: Set or show per MVR VLAN channel. Syntax: MVR VLAN Channel [<vid&
User’s Manual of IGS-10020PT / IGS-10020HPT 581 Syntax: MVR Immediate Leave [<port_list>] [enable|disable] Parameters: <<port_list>
User’s Manual of IGS-10020PT / IGS-10020HPT 582 Syntax: MVR SFM [<vid>] [<port_list>] Parameters: <vid> : VLAN ID (1-4095)
User’s Manual of IGS-10020PT / IGS-10020HPT 583 6.25 Voice VLAN Command Voice VLAN Configuration Description: Show Voice VLAN configuration. Synta
User’s Manual of IGS-10020PT / IGS-10020HPT 584 Port Mode Security Discovery Protocol ---- -------- -------- ------------------ 1 Dis
User’s Manual of IGS-10020PT / IGS-10020HPT 585 Voice VLAN ID Description: Set or show Voice VLAN ID. Syntax: Voice VLAN ID [<vid>] Paramet
User’s Manual of IGS-10020PT / IGS-10020HPT 586 Voice VLAN Traffic Class Description: Set or show Voice VLAN ID. Syntax: Voice VLAN Traffic Class
User’s Manual of IGS-10020PT / IGS-10020HPT 587 Voice VLAN OUI Delete Description: Delete Voice VLAN OUI entry. Modify OUI table will restart auto
User’s Manual of IGS-10020PT / IGS-10020HPT 588 Example: Lookup Voice VLAN OUI entry. IGS-10020HPT:/>voice vlan oui lookup Voice VLAN Port
User’s Manual of IGS-10020PT / IGS-10020HPT 589 Parameters: <port_list>: Port list or 'all', default: All ports enable : Enable Voi
User’s Manual of IGS-10020PT / IGS-10020HPT 59 1. This utility shows all the necessary information from the devices, such as MAC Address, Device N
User’s Manual of IGS-10020PT / IGS-10020HPT 590 6.26 Ethernet Ring Protection Switching Command ERPS Command Description: Invoking an administrativ
User’s Manual of IGS-10020PT / IGS-10020HPT 591 <east_port> : protection group Port 0 <west_port> : protection group Port 1, Port 1 can
User’s Manual of IGS-10020PT / IGS-10020HPT 592 <group-id> : protection group-id for which vid belongs to. Syntax: Erps vlan add <vid>
User’s Manual of IGS-10020PT / IGS-10020HPT 593 <west_sf_mep> : SF mep id for Port 1 <east_raps_mep>: CC/RAPS mep id for Port 0 <we
User’s Manual of IGS-10020PT / IGS-10020HPT 594 ERPS RPL Neighbour Clear Description: make this node as non-neighbour for a protection group <gr
User’s Manual of IGS-10020PT / IGS-10020HPT 595 Parameters: <hold_timeout>: timer timeout values <group-id> : protection group id 1
User’s Manual of IGS-10020PT / IGS-10020HPT 596 ERPS Delete Description: deletion of a protection group <group-id> : protection group id
User’s Manual of IGS-10020PT / IGS-10020HPT 597 Parameters: <group-id> : protection group id 1 - 64 statistics|clear: ERPS statistics 6.
User’s Manual of IGS-10020PT / IGS-10020HPT 598 Default Setting: 5 Loop Protect Shutdown Description: Set or show the Loop Protection shutdown time
User’s Manual of IGS-10020PT / IGS-10020HPT 599 enable : Enable Loop Protection disable: Disable Loop Protection Loop Protect Port Action Descripti
User’s Manual of IGS-10020PT / IGS-10020HPT 6 4.7.8 Port Status ...
User’s Manual of IGS-10020PT / IGS-10020HPT 60 4. WEB CONFIGURATION This section introduces the configuration and functions of the Web-Based manage
User’s Manual of IGS-10020PT / IGS-10020HPT 600 Parameters: <port_list>: Port list or 'all', default: All ports 6.28 IPMC Command
User’s Manual of IGS-10020PT / IGS-10020HPT 601 IPMC Flooding Description: Set or show the IPMC unregistered addresses flooding operation. Syntax:
User’s Manual of IGS-10020PT / IGS-10020HPT 602 Default Setting: disable Example: Enable IGMP Leave Proxy IGS-10020HPT:/>ipmc leave proxy i
User’s Manual of IGS-10020PT / IGS-10020HPT 603 Parameters: mld|igmp : mld : IPMC for IPv6 MLD igmp: IPMC for IPv4 IGMP range : SSM Range keyw
User’s Manual of IGS-10020PT / IGS-10020HPT 604 IPMC State Description: Set or show the IPMC snooping state for VLAN. Syntax: IPMC State [mld|igmp
User’s Manual of IGS-10020PT / IGS-10020HPT 605 Default Setting: disable Example: Enable IGMP querier for VLAN 1 IGS-10020HPT:/>ipmc querie
User’s Manual of IGS-10020PT / IGS-10020HPT 606 igmp: IPMC for IPv4 IGMP <port_list>: Port list or 'all', default: All ports enable
User’s Manual of IGS-10020PT / IGS-10020HPT 607 IPMC Filtering Description: Set or show the IPMC port group filtering list. Syntax: IPMC Filtering
User’s Manual of IGS-10020PT / IGS-10020HPT 608 IPMC Status Description: Show IPMC operational status, accordingly. Syntax: IPMC Status [mld|igmp]
User’s Manual of IGS-10020PT / IGS-10020HPT 609 IPMC Version Description: Show IPMC Versions. Syntax: IPMC Version [mld|igmp] [<vid>] Param
User’s Manual of IGS-10020PT / IGS-10020HPT 61 Logging on the Industrial Managed Switch 1. Use Internet Explorer 7.0 or above Web browser. Ente
User’s Manual of IGS-10020PT / IGS-10020HPT 610 Syntax: IPMC Parameter RV [mld|igmp] [<vid>] [ipmc_param_rv] Parameters: mld|igmp : mld
User’s Manual of IGS-10020PT / IGS-10020HPT 611 Parameters: mld|igmp : mld : IPMC for IPv6 MLD igmp: IPMC for IPv4 IGMP <vid> :
User’s Manual of IGS-10020PT / IGS-10020HPT 612 mld : IPMC for IPv6 MLD igmp: IPMC for IPv4 IGMP <vid> : VLAN ID (1-4095) or 'an
User’s Manual of IGS-10020PT / IGS-10020HPT 613 Syntax: VCL Macvlan Del <mac_addr> Parameters: <mac_addr> : MAC address (xx-xx-xx-xx-x
User’s Manual of IGS-10020PT / IGS-10020HPT 614 Syntax: VCL ProtoVlan Protocol Add Snap <oui>|rfc_1042|snap_8021h <pid> <group_id>
User’s Manual of IGS-10020PT / IGS-10020HPT 615 Parameters: <oui>|rfc_1042|snap_8021h: OUI value (Hexadecimal 00-00-00 to FF-FF-FF). <pid&
User’s Manual of IGS-10020PT / IGS-10020HPT 616 Parameters: <port_list>: Port list or 'all', default: All ports <group_id> :
User’s Manual of IGS-10020PT / IGS-10020HPT 617 VCL IP Subnet-based Vlan Delete Description: Delete VCL IP Subnet-based VLAN entry. Syntax: VCL IP
User’s Manual of IGS-10020PT / IGS-10020HPT 618 6.30 SMTP Command SMTP Configuration Description: Show SMTP configure. Syntax: SMTP Configuration
User’s Manual of IGS-10020PT / IGS-10020HPT 619 Parameters: <server>: SMTP server address <port> : SMTP server port Default Setting:
User’s Manual of IGS-10020PT / IGS-10020HPT 62 Figure 4-1-3: Default Main Page Now, you can use the Web management interface to continue the swit
User’s Manual of IGS-10020PT / IGS-10020HPT 620 SMTP Auth_pass Description: Set or to show SMTP authentication password configure. Syntax: SMTP Au
User’s Manual of IGS-10020PT / IGS-10020HPT 621 Default Setting: Disable SMTP Mail to 1 Description: Set or show SMTP e-mail 1 to configure. Syn
User’s Manual of IGS-10020PT / IGS-10020HPT 622 6.31 DIDO Command DIDO DI Act Description: Set or show the system digital input0/1 action. Syntax:
User’s Manual of IGS-10020PT / IGS-10020HPT 623 DIDO DI Enable Description: Set or show the system digital input0/1. Syntax: DIDO Di_en [first|sec
User’s Manual of IGS-10020PT / IGS-10020HPT 624 enable : Enable digital input0/1 function disable : Disable digital input0/1 function (default: Se
User’s Manual of IGS-10020PT / IGS-10020HPT 625 DIDO DO Power Alarm Description: Set or show the system digital output0/1 power alarm. Syntax: DID
User’s Manual of IGS-10020PT / IGS-10020HPT 626 DIDO Fault Enable Description: Set or show the system fault alarm. Syntax: DIDO Fault_en [enable|d
User’s Manual of IGS-10020PT / IGS-10020HPT 627 6.32 Show Command Show Access Description: Show access management configuration. Syntax: Show acce
User’s Manual of IGS-10020PT / IGS-10020HPT 628 Syntax: Show auth Show DHCP Relay Description: Show DHCP relay configuration. Syntax: Show DHCP
User’s Manual of IGS-10020PT / IGS-10020HPT 629 Show IP Description: Show IP configuration. Syntax: Show ip Show LACP Description: Show LACP con
User’s Manual of IGS-10020PT / IGS-10020HPT 63 4.1 Main Web Page The Industrial Managed Switch provides a Web-based browser interface for configuri
User’s Manual of IGS-10020PT / IGS-10020HPT 630 Show Loop Protect Description: Show Loop Protection configuration. Syntax: Show Loop Protect Sho
User’s Manual of IGS-10020PT / IGS-10020HPT 631 Syntax: Show PoE Show Port Description: Show port configuration. Syntax: Show port Show Privil
User’s Manual of IGS-10020PT / IGS-10020HPT 632 Show SNMP Description: Show SNMP configuration. Syntax: Show SNMP Show SSH Description: Show SSH
User’s Manual of IGS-10020PT / IGS-10020HPT 633 Syntax: Show upnp Show Users Description: Show users configuration. Syntax: Show users Show VL
User’s Manual of IGS-10020PT / IGS-10020HPT 634 Show STP Description: Show STP Port configuration. Syntax: Show STP
User’s Manual of IGS-10020PT / IGS-10020HPT 635 7. SWITCH OPERATION 7.1 Address Table The Industrial Managed Switch is implemented with an address
User’s Manual of IGS-10020PT / IGS-10020HPT 636 7.5 Auto-Negotiation The STP ports on the Industrial Managed Switch have built-in “Auto-negotiation
User’s Manual of IGS-10020PT / IGS-10020HPT 637 8. TROUBLE SHOOTING This chapter contains information to help you solve problems. If the Industrial
User’s Manual of IGS-10020PT / IGS-10020HPT 638 While IP Address be changed or forgotten admin password – To reset the IP address to the defau
User’s Manual of IGS-10020PT / IGS-10020HPT 639 APPENDEX A A.1 Switch's Data RJ-45 Pin Assignments - 1000Mbps, 1000Base-T Implicit imp
User’s Manual of IGS-10020PT / IGS-10020HPT 64 Main Menu Using the onboard web agent, you can define system parameters, manage and control the In
User’s Manual of IGS-10020PT / IGS-10020HPT 640 The standard cable, RJ-45 pin assignment The standard RJ-45 receptacle/connector There are 8 wi
User’s Manual of IGS-10020PT / IGS-10020HPT 641 APPENDEX B: GLOSSARY A ACE ACE is an acronym for Access Control Entry. It describes access perm
User’s Manual of IGS-10020PT / IGS-10020HPT 642 Rate Limiter ID to the ACE(s) or ingress port(s). AES AES is an acronym for Advanced Encryption
User’s Manual of IGS-10020PT / IGS-10020HPT 643 transmitting CCM frames to a peer MEP. CCM CCM is an acronym for Continuity Check Message. It i
User’s Manual of IGS-10020PT / IGS-10020HPT 644 The DHCP option 82 enables a DHCP relay agent to insert specific information into a DHCP request pa
User’s Manual of IGS-10020PT / IGS-10020HPT 645 E EEE EEE is an abbreviation for Energy Efficient Ethernet defined in IEEE 802.3az. EPS EPS
User’s Manual of IGS-10020PT / IGS-10020HPT 646 HTTPS HTTPS is an acronym for Hypertext Transfer Protocol over Secure Socket Layer. It is used to
User’s Manual of IGS-10020PT / IGS-10020HPT 647 IMAP is the protocol that IMAP clients use to communicate with the servers, and SMTP is the protoco
User’s Manual of IGS-10020PT / IGS-10020HPT 648 The IEEE 802.2 Logical Link Control (LLC) protocol provides a link mechanism for upper layer protoc
User’s Manual of IGS-10020PT / IGS-10020HPT 649 MEP is an acronym for Maintenance Entity Endpoint and is an endpoint in a Maintenance Entity Group
User’s Manual of IGS-10020PT / IGS-10020HPT 65 4.2 System Use the System menu items to display and configure basic administrative details of the In
User’s Manual of IGS-10020PT / IGS-10020HPT 650 The NetBIOS giving each computer in the network both a NetBIOS name and an IP address corresponding
User’s Manual of IGS-10020PT / IGS-10020HPT 651 PING ping is a program that sends a series of packets over a network or the Internet to a specifi
User’s Manual of IGS-10020PT / IGS-10020HPT 652 Private VLAN In a private VLAN, PVLANs provide layer 2 isolation between ports within the same br
User’s Manual of IGS-10020PT / IGS-10020HPT 653 R RARP RARP is an acronym for Reverse Address Resolution Protocol. It is a protocol that is use
User’s Manual of IGS-10020PT / IGS-10020HPT 654 SMTP is an acronym for Simple Mail Transfer Protocol. It is a text-based protocol that uses the Tra
User’s Manual of IGS-10020PT / IGS-10020HPT 655 SyncE Is an abbreviation for Synchronous Ethernet. This functionality is used to make a network &ap
User’s Manual of IGS-10020PT / IGS-10020HPT 656 ToS is an acronym for Type of Service. It is implemented as the IPv4 ToS priority control. It is fu
User’s Manual of IGS-10020PT / IGS-10020HPT 657 It is Virtual LAN. It is a method to restrict communication between switch ports. VLANs can be used
User’s Manual of IGS-10020PT / IGS-10020HPT 658 necessarily with first generation wireless access points. WPA2 implements the full standard, but wi
User’s Manual of IGS-10020PT / IGS-10020HPT 66 configured SNTP Server, if any. • System Uptime The period of time the device has been operational.
User’s Manual of IGS-10020PT / IGS-10020HPT 67 address is zero, DHCP will retry. If DHCP server does not respond around 35 seconds and the configur
User’s Manual of IGS-10020PT / IGS-10020HPT 68 The page includes the following fields: Object Description • Auto Configuration Enable IPv6 auto
User’s Manual of IGS-10020PT / IGS-10020HPT 69 Figure 4-2-4: Users Configuration Page Screenshot The page includes the following fields: Object
User’s Manual of IGS-10020PT / IGS-10020HPT 7 4.9.15 QoS Statistics ...
User’s Manual of IGS-10020PT / IGS-10020HPT 70 The page includes the following fields: Object Description • User Name A string identifies the use
User’s Manual of IGS-10020PT / IGS-10020HPT 71 4.2.5 Privilege Levels This page provides an overview of the privilege levels. After setup is comple
User’s Manual of IGS-10020PT / IGS-10020HPT 72 The page includes the following fields: Object Description • Group Name The name identifies the pr
User’s Manual of IGS-10020PT / IGS-10020HPT 73 Figure 4-2-8: NTP Configuration Page Screenshot The page includes the following fields: Object De
User’s Manual of IGS-10020PT / IGS-10020HPT 74 4.2.7 Daylight Saving The Reboot page enables the device to be rebooted from a remote location. Once
User’s Manual of IGS-10020PT / IGS-10020HPT 75 Daylight Saving Time duration for single time configuration. ( Default : Disabled ) Daylight Saving
User’s Manual of IGS-10020PT / IGS-10020HPT 76 4.2.8 UPnP Configuring UPnP on this page. UPnP is an acronym for Universal Plug and Play. The goals
User’s Manual of IGS-10020PT / IGS-10020HPT 77 Figure 4-2-11: UPnP Devices shows on Windows My Network Places 4.2.9 DHCP Relay Configuring DHCP
User’s Manual of IGS-10020PT / IGS-10020HPT 78 standalone switch it always equals 0; in stackable switch it means switch ID). The parameter of &quo
User’s Manual of IGS-10020PT / IGS-10020HPT 79 message that already contains it. Keep: Keep the original relay information when receive a DHCP
User’s Manual of IGS-10020PT / IGS-10020HPT 8 4.13.4 Dynamic IP Source Guard Table ...
User’s Manual of IGS-10020PT / IGS-10020HPT 80 • Receive Bad Circuit ID The number of packets whose Circuit ID option did not match known circuit
User’s Manual of IGS-10020PT / IGS-10020HPT 81 Figure 4-2-14: CPU Load Page Screenshot Buttons Auto-refresh : Check this box to refresh the pa
User’s Manual of IGS-10020PT / IGS-10020HPT 82 4.2.12 System Log The switch system log information is provided here. The System Log screen in Figur
User’s Manual of IGS-10020PT / IGS-10020HPT 83 : Updates the system log entries, starting from the first available entry ID. : Updates the system l
User’s Manual of IGS-10020PT / IGS-10020HPT 84 4.2.14 Remote Syslog Configure remote syslog on this page. The Remote Syslog screen in Figure 4-2-17
User’s Manual of IGS-10020PT / IGS-10020HPT 85 4.2.15 SMTP Configuration Configuring SMTP Configuration on this page The SMTP Configuration scre
User’s Manual of IGS-10020PT / IGS-10020HPT 86 • Authentication Password It is for you to input your mail account password. • E-mail From It is f
User’s Manual of IGS-10020PT / IGS-10020HPT 87 Figure 4-2-19 Windows File Selection Menu Popup The page includes the following fields: Object Des
User’s Manual of IGS-10020PT / IGS-10020HPT 88 4.2.17 Fault Alarm The Fault Relay Alarm function provides the Power Failure and Port Link Down/Brok
User’s Manual of IGS-10020PT / IGS-10020HPT 89 4.2.18 EEE Power Reduction This page allows the user to configure the current EEE port settings. EEE
User’s Manual of IGS-10020PT / IGS-10020HPT 9 4.19.4 Ethernet Ring Protocol Switch Configuration ...
User’s Manual of IGS-10020PT / IGS-10020HPT 90 The page includes the following fields: Object Description • Port The switch port number of the lo
User’s Manual of IGS-10020PT / IGS-10020HPT 91 Figure 4-2-23: Software Successfully Loaded Notice Screen DO NOT Power OFF the Industrial Manag
User’s Manual of IGS-10020PT / IGS-10020HPT 92 Buttons : Click to upgrade firmware. DO NOT Power OFF the Industrial Managed Switch until the upda
User’s Manual of IGS-10020PT / IGS-10020HPT 93 configuration including syntax descriptions is included in the file. The file may then be modified u
User’s Manual of IGS-10020PT / IGS-10020HPT 94 4.2.22 Configuration Upload This function allows backup and reload the current configuration of the
User’s Manual of IGS-10020PT / IGS-10020HPT 95 4.2.23 Image Select This function provides dual image deposit in the Industrial Managed Switch, user
User’s Manual of IGS-10020PT / IGS-10020HPT 96 Figure 4-2-33: Image Select Page Screenshot After the system reboot, you can use the Alternate Ima
User’s Manual of IGS-10020PT / IGS-10020HPT 97 。 After the “Factory” button is pressed and rebooted, the system will be loaded default settings, e
User’s Manual of IGS-10020PT / IGS-10020HPT 98 4.3 Simple Network Management Protocol 4.3.1 SNMP Overview The Simple Network Management Protocol (S
User’s Manual of IGS-10020PT / IGS-10020HPT 99 SNMPv3 Groups Configure SNMPv3 groups table on this page. SNMPv3 Views Configure SNMPv3 view
Comments to this Manuals