Planet MGSW-28240F User Manual Page 78
- Page / 438
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Command Guide of MGSW-28240F
To exit configure terminal mode.
Switch# configure terminal
Switch (config)# exit
#
4.2.52 green-ethernet led interval
Command:
green-ethernet led interval <0~24> intensity <0-100>
<0~24> Interval from 00.00 to 24.00 (00 is used to start at midnight,
while 24 is used to stop at midnight).
intensity LEDs intensity.
<0-100> Intensity from 0% (LEDs OFF) to 100%
Default:
N/A
Usage Guide:
To configure LED Power reduction for interval time.
Example:
To configure LED Power reduction as tabled below.
Switch# configure terminal
Switch (config)# green-ethernet led interval 8-13 intensity 80
4.2.53 green-ethernet led on-event
Command:
green-ethernet led on-event error | link-change <0-65535>
error Set LEDs intensity to 100% if an error occurs.
link-change Specifies how long to turn LEDs intensity into 100%, when a link changes state.
<0-65535> Number of seconds to set LEDs intensity at 100% at link change.
-78
-
- Command Guide of MGSW-28240F 1
- Contents 2
- 1.1 Accessing the CLI 20
- 1.2 Command Line Modes 20
- 1.3 Requirements 21
- 2.1 Terminal Setup 22
- 2.2 Logon to the Console 24
- 2.3 Configuring IP Address 24
- Configuring IP Address 25
- 3.1 Telnet Login 27
- 4.1 clear 28
- 4.1.4 clear eps 29
- 4.1.5 clear erps 29
- 4.1.6 clear erps statistics 30
- 4.1.7 clear ip arp 30
- 4.1.26 clear ipv6 neighbors 38
- 4.1.31 clear lacp statistics 40
- 4.1.32 clear lldp statistics 41
- 4.1.40 clear mep 44
- 4.1.41 clear mvr name 44
- 4.1.42 clear mvr statistics 45
- 4.1.43 clear mvr vlan 45
- GigabitEthernet 47
- 10GigabitEthernet 47
- 4.1.52 clear statistics * 49
- 4.2 configure terminal 50
- 4.2.13 access management 55
- 4.2.14 access-list ace 56
- 4.2.18 aggregation mode 59
- 4.2.19 aggregation mode 60
- 4.2.20 banner 61
- 4.2.21 banner exec 61
- 4.2.22 banner login 62
- 4.2.23 banner motd 63
- 4.2.24 clock summer-time 63
- 4.2.25 clock timezone 64
- 4.2.29 dot1x feature 66
- 4.2.30 dot1x guest-vlan 66
- 4.2.32 dot1x max-reauth-req 67
- 4.2.36 enable password 69
- 4.2.37 enable password level 69
- 4.2.38 enable secret 70
- 4.2.39 end 71
- 4.2.43 erps <1-64> mep 73
- 4.2.44 erps <1-64> mep 74
- 4.2.47 erps <1-64> sub 75
- 4.2.51 exit 77
- 4.2.54 help 79
- 4.2.55 hostname 80
- 4.2.56.3 access-list logging 81
- 4.2.56.4 access-list policy 82
- 4.2.56.9 aggregation group 85
- 4.2.56.10 description 85
- 4.2.56.11 do 86
- 4.2.56.12 dot1x guest-vlan 86
- 4.2.56.13 dot1x port-control 87
- 4.2.56.14 dot1x radius-qos 87
- 4.2.56.15 dot1x radius-vlan 88
- 4.2.56.17 duplex 89
- 4.2.56.18 end 89
- 4.2.56.19 excessive-restart 90
- 4.2.56.20 exit 90
- 4.2.56.21 flowcontrol 91
- 4.2.56.34 ip verify source 97
- 4.2.56.40 lacp 100
- 4.2.56.41 lacp key 101
- 4.2.56.42 lacp port-priority 101
- 4.2.56.43 lacp role 102
- 4.2.56.44 lacp timeout 102
- 4.2.56.45 lldp cdp-aware 103
- 4.2.56.48 lldp receive 105
- 4.2.56.55 loop-protect 108
- 4.2.56.54 lldp transmit 108
- 4.2.56.60 media-type 111
- 4.2.56.61 mtu 111
- 4.2.56.63 mvr name 112
- 4.2.56.64 mvr vlan 113
- 4.2.56.66 no 114
- 4.2.56.67 ping ip 114
- 4.2.56.68 poe mode 115
- 4.2.56.69 poe pdcheck IP 116
- 4.2.56.70 poe pdcheck action 116
- 4.2.56.71 poe pdcheck enable 117
- 4.2.56.75 poe power limit 119
- 4.2.56.76 poe priority 119
- 4.2.56.77 poe time-range 120
- 4.2.56.78 port-security 121
- 4.2.56.82 pvlan 123
- 4.2.56.83 pvlan isolation 123
- 4.2.56.84 qos cos 124
- 4.2.56.85 qos dei 124
- 4.2.56.86 qos dpl 125
- 4.2.56.87 qos dscp-classify 125
- 4.2.56.88 qos dscp-remark 126
- 4.2.56.89 qos dscp-translate 127
- 4.2.56.90 qos map cos-tag 127
- 4.2.56.91 qos map tag-cos 128
- 4.2.56.92 qos pcp 129
- 4.2.56.93 qos policer 129
- 4.2.56.96 qos shaper 131
- 4.2.56.98 qos storm unicast 132
- 4.2.56.99 qos storm unknown 133
- 4.2.56.100 qos tag-remark 133
- 4.2.56.102 qos trust dscp 134
- 4.2.56.103 qos trust tag 135
- 4.2.56.106 shutdown 137
- 4.2.56.107 spanning-tree 137
- 4.2.56.116 speed 142
- 4.2.56.126 switchport mode 148
- 4.2.57 interface vlan 154
- 4.2.57.1 do 155
- 4.2.57.2 end 155
- 4.2.57.3 exit 156
- 4.2.57.4 ip address 156
- 4.2.57.5 ip address dhcp 157
- 4.2.57.7 ip dhcp server 158
- 4.2.57.8 ip igmp snooping 159
- 4.2.57.18 ipv6 address 165
- 4.2.57.19 ipv6 mld snooping 165
- 4.2.57.28 no 171
- 4.2.58 ip arp inspection 171
- 4.2.64 ip dhcp pool 175
- 4.2.64.1 broadcast 176
- 4.2.64.4 client-name 178
- 4.2.64.5 default-router 178
- 4.2.64.6 dns-server 179
- 4.2.64.7 do 179
- 4.2.64.8 domain-name 180
- 4.2.64.9 end 180
- 4.2.64.10 exit 181
- 4.2.64.11 hardware-address 182
- 4.2.64.12 host 182
- 4.2.64.13 lease 183
- 4.2.64.15 netbios-node-type 184
- 4.2.64.16 netbios-scope 184
- 4.2.64.17 network 185
- 4.2.64.18 nis-domain-name 186
- 4.2.64.19 nis-server 186
- 4.2.64.20 no 187
- 4.2.64.21 ntp-server 187
- 4.2.64.22 vendor 188
- 4.2.65 ip dns proxy 188
- 4.2.66 ip helper-address 189
- 4.2.68 ip http secure-server 190
- 4.2.69 ip igmp host-proxy 191
- 4.2.71 ip igmp snooping 192
- 4.2.72 ip igmp snooping vlan 192
- 4.2.73 ip igmp ssm-range 193
- 4.2.75 ip name-server 194
- 4.2.76 ip name-server dhcp 194
- 4.2.78 ip route 196
- 4.2.79 ip routing 196
- 4.2.81 ip ssh 198
- 4.2.82 ip verify source 198
- 4.2.84 ipmc profile 199
- 4.2.85.1 default range 200
- 4.2.85.2 description 201
- 4.2.85.3 do 201
- 4.2.85.4 end 202
- 4.2.85.5 exit 203
- 4.2.85.6 no 203
- 4.2.85.7 range 204
- 4.2.86 ipv6 mld host-proxy 204
- 4.2.88 ipv6 mld snooping 205
- 4.2.90 ipv6 mld ssm-range 206
- 4.2.92 ipv6 route 208
- 4.2.93 lacp system-priority 209
- 4.2.94 line 209
- 4.2.94.1 do 210
- 4.2.94.2 editing 210
- 4.2.94.3 end 211
- 4.2.94.4 exec-banner 211
- 4.2.94.5 exec-timeout 212
- 4.2.94.6 exec-timeout 213
- 4.2.94.7 exit 213
- 4.2.94.8 history size 214
- 4.2.94.9 length 214
- 4.2.94.10 location 215
- 4.2.94.11 motd-banner 215
- 4.2.94.12 no 216
- 4.2.94.13 privilege level 216
- 4.2.94.14 width 217
- 4.2.95 lldp holdtime 218
- 4.2.96 lldp med datum 218
- 4.2.97 lldp med fast 219
- 4.2.103 lldp reinit 223
- 4.2.104 lldp timer 223
- 4.2.106 logging host 225
- 4.2.107 logging level 225
- 4.2.108 logging on 226
- 4.2.109 loop-protect 226
- 4.2.138 monitor destination 247
- 4.2.139 monitor source 248
- 4.2.140 mvr 248
- 4.2.160 network-clock option 260
- 4.2.165 no 264
- 4.2.166 ntp 264
- 4.2.167 ntp server 265
- 4.2.167.1 do 265
- 4.2.167.2 end 266
- 4.2.167.3 exit 266
- 4.2.167.4 no 267
- 4.2.167.5 periodic 268
- 4.2.167.6 reboot-only 269
- 4.2.168 port-security 269
- 4.2.169 port-security aging 270
- 4.2.171 privilege 271
- 4.2.172 qos map cos-dscp 272
- 4.2.174 qos map dscp-cos 274
- 4.2.177 qos qce 278
- 4.2.178 qos qce update 279
- 4.2.179 qos qce refresh 280
- 4.2.180 qos wred 281
- 4.2.185 radius-server host 284
- 4.2.186 radius-server key 285
- 4.2.189 rmon alarm 287
- 4.2.190 rmon event 288
- 4.2.192 snmp-server 290
- 4.2.193 snmp-server access 290
- 4.2.197 snmp-server host 293
- 4.2.197.1 do 294
- 4.2.197.2 end 294
- 4.2.197.3 exit 295
- 4.2.197.4 host 295
- 4.2.197.5 no 296
- 4.2.197.6 informs 297
- 4.2.197.7 shutdown 297
- 4.2.197.8 traps 298
- 4.2.197.9 version 299
- 4.2.198.1 do 300
- 4.2.198.2 end 301
- 4.2.198.3 exit 301
- 4.2.198.4 no 302
- 4.2.206 upnp 311
- 4.2.208 upnp ttl 313
- 4.2.209 username 313
- 4.2.210 vlan 314
- 4.2.210.1 do 315
- 4.2.210.2 end 315
- 4.2.210.3 exit 316
- 4.2.210.4 name 316
- 4.2.210.5 no 317
- 4.2.212 vlan protocol 318
- 4.2.213 voice vlan 319
- 4.2.215 voice vlan class 320
- 4.2.216 voice vlan oui 321
- 4.2.217 voice vlan vid 321
- 4.2.218 web privilege group 322
- 4.3 copy 323
- 4.3.1 copy 323
- 4.4 debug 323
- 4.4.1 debug 323
- 4.5 delete 324
- 4.5.1 delete 324
- 4.6 dir 325
- 4.6.1 dir 325
- 4.7 disable 326
- 4.7.1 disable 326
- 4.8.1 do 326
- 4.9 dot1x 327
- 4.9.1 dot1x initialize 327
- 4.10 enable 327
- 4.10.1 enable 327
- 4.11 erps 328
- 4.11.1 erps 328
- 4.12 exit 329
- 4.12.1 exit 329
- 4.13 firmware 329
- 4.13.1 firmware swap 329
- 4.13.2 firmware upgrade 330
- 4.14 ip 331
- 4.15 logout 331
- 4.15.1 logout 331
- 4.16 more 332
- 4.16.1 more 332
- 4.17 no 333
- 4.17.1 no 333
- 4.18 ping 333
- 4.18.1 ping ip 333
- 4.18.2 ping ipv6 334
- 4.19 reload 335
- 4.19.1 reload cold 335
- 4.19.2 reload defaults 336
- 4.20 send 336
- 4.20.1 send 336
- 4.21 show 337
- 4.21.1 show aaa 337
- 4.21.3 show access-list 339
- 4.21.4 show access-list 340
- 4.21.6 show aggregation 343
- 4.21.7 show aggregation mode 343
- 4.21.8 show clock 344
- 4.21.9 show clock detail 344
- 4.21.11 show dot1x status 347
- 4.21.12 show eps 348
- 4.21.13 show erps 349
- 4.21.14 show evc 350
- 4.21.15 show evc statistics 351
- 4.21.16 show green-ethernet 351
- 4.21.19 show history 353
- 4.21.26 show interface vlan 358
- 4.21.27 show ip arp 359
- 4.21.33 show ip dhcp pool 364
- 4.21.34 show ip dhcp relay 365
- 4.21.35 show ip dhcp server 365
- 4.21.46 show ip route 373
- 4.21.48 show ip ssh 374
- 4.21.49 show ip statistics 375
- 4.21.51 show ipmc profile 377
- 4.21.52 show ipmc range 378
- 4.21.53 show ipv6 interface 379
- 4.21.56 show ipv6 neighbor 381
- 4.21.57 show ipv6 route 382
- 4.21.59 show lacp 385
- 4.21.60 show line 385
- 4.21.61 show link-oam 386
- 4.21.66 show logging 390
- 4.21.67 show loop-protect 391
- 4.21.69 show mep 393
- 4.21.70 show mvr 394
- 4.21.71 show network-clock 395
- 4.21.72 show ntp status 396
- 4.21.73 show platform phy 396
- 4.21.79 show privilege 400
- 4.21.84 show ptp ext 404
- 4.21.85 show pvlan 404
- 4.21.86 show pvlan isolation 405
- 4.21.87 show qos 406
- 4.21.88 show radius-server 408
- 4.21.89 show rmon alarm 409
- 4.21.90 show rmon event 410
- 4.21.91 show rmon history 410
- 4.21.92 show rmon statistics 411
- 4.21.93 show running-config 412
- 4.21.94 show snmp 414
- 4.21.95 show snmp access 416
- 4.21.97 show snmp host 417
- 4.21.101 show snmp user 423
- 4.21.102 show snmp view 424
- 4.21.103 show spanning-tree 424
- 4.21.106 show terminal 426
- 4.21.107 show upnp 427
- 4.21.108 show users 428
- 4.21.109 show version 429
- 4.21.110 show vlan 430
- 4.21.112 show vlan mac 431
- 4.21.114 show voice vlan 433
- 4.22 terminal 435
- 4.22.1 terminal editing 435
- 4.22.4 terminal length 437
- 4.22.5 terminal width 438
Related products and manuals for Routers Planet MGSW-28240F
Routers Planet MGSW-28240F User Manual
(643 pages)
(643 pages)
Routers Planet SGSW-24040 User Manual
(567 pages)
(567 pages)
Routers Planet SW-504 User Manual
(2 pages)
(2 pages)
Routers Planet VC-2400MR User Manual
(12 pages)
(12 pages)
Routers Planet VC-2400MR48 User Manual
(2 pages)
(2 pages)
Routers Planet VC-2400MR48 User Manual
(217 pages)
(217 pages)
Routers Planet WGS-803 User Manual
(2 pages)
(2 pages)
Routers Planet WGS-804HP User Manual
(2 pages)
(2 pages)
Routers Planet WGSD-10020 User Manual
(12 pages)
(12 pages)
Routers Planet WGS3-24240 User Manual
(570 pages)
(570 pages)
Routers Planet WGS3-24000 User Manual
(526 pages)
(526 pages)
Routers Planet WGSD-10020HP User Manual
(358 pages)
(358 pages)
Routers Planet WGSD-10020 User Manual
(553 pages)
(553 pages)
Routers Planet WGSD-1022C User Manual
(8 pages)
(8 pages)
Routers Planet WGSD-10020 User Manual
(557 pages)
(557 pages)
Routers Planet WGSD-10020 User Manual
(373 pages)
(373 pages)
Routers Planet WGSW-20160HP User Manual
(12 pages)
(12 pages)
Routers Planet WGSD-1022 User Manual
(355 pages)
(355 pages)
Routers Planet WGSW-28040 User Manual
(16 pages)
(16 pages)
© 2020, manymanuals.com. All rights reserved. | 1.307 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals