Planet WGSD-10020 User Manual

8-Port 10/100/1000Mbps + 2 100/1000X SFPManaged Ethernet SwitchWGSD-100208-Port 10/100/1000Mbps 802.3at PoE + 2 100/1000X SFPManaged Ethernet SwitchWG

103. After entering the password, the main screen appears as Figure 6-3.Figure 6-3 Web Main Screen of WGSD Managed Switch4. The Switch Menu on the

117. While IP Address be changed or forgotten admin password – To reset the IP address to the default IP Address “192.168.0.100” or reset

128. Customer SupportThank you for purchase PLANET products. You can browse our online FAQ resource at the PLANET Web site rst to check if it could s

Table of Contents1. Package Content ... 32. Requirements ...

31. Package ContentThank you for purchasing PLANET Layer 2 Managed Switch, WGSD-10020 / WGSD-10020HP. Terms of “Managed Switch” means the Sw

42. RequirementsThe Managed Switch provide remote login interface for manage; the following equipments are necessary for further management.

53. Terminal SetupTo congure the system, connect a serial cable to a COM port on a PC or notebook computer and to serial (console) por

64. Logon to the ConsoleOnce the terminal has connected to the device, power on the WGSD Managed Switch, the terminal will display that it

75. Congure IP AddressThe WGSD Managed Switch is shipped with default IP address as following.IP Address: 192.168.0.100Subnet Mask: 255.255.255.0To

8 Congure IP address3. On “Switch/>” prompt, enter the following command and press <Enter>. As show in Figure 5-2.Switch/> ip

96. Start Web ManagementThe Managed Switch provides a built-in browser interface. You can manage it remotely by having a remote host