Planet MGSW-28240F User Manual Page 238
- Page / 438
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Command Guide of MGSW-28240F
lb Loop Back
<Prio : 0-7> Priority in case of tagged OAM. In the EVC domain this is the COS-ID.
count The number of LBM PDU to send in one loop test. The value 0 indicate infinite transmission (test behavior). This
is HW based LBM/LBR and Requires VOE.
<Count : uint> Number of LBM PDU to send value
size The number of bytes in the LBM PDU Data Pattern TLV
<size> The LBM frame size. This is entered as the wanted size (in bytes) of a un-tagged frame containing LBM OAM
PDU - including CRC (four bytes). Example when 'Size' = 64 => Un-tagged frame size = DMAC(6) + SMAC(6) +
TYPE(2) + LBM PDU LENGTH(46) + CRC(4) = 64
interval The number of bytes in the LBM PDU Data Pattern TLV
<interval> The interval between transmitting LBM PDU. in case 'count' != 0 this is in 10ms and max is 100. In case
'count' == 0 this is in 1us and max is 10.000.
dei Drop Eligible Indicator in case of tagged OAM.
multi OAM PDU is transmitted with multicast MAC.
uni OAM PDU is transmitted with unicast MAC. The MAC is taken from
peer MEP MAC database.
mac Loop Back unicast MAC to be used in case of LB against MIP.
<Mac : mac_addr> Loop Back target unicast MAC value
mep-id Peer MEP-ID for unicast LB. The MAC is taken from peer MEP MAC database.
<Mepid : uint> Peer MEP-ID value
Default:
None
Usage Guide:
To configure Loop Back of MEP.
Example:
To configure Loop Back of MEP 2 as below table
Switch# configure terminal
Switch (config)# mep 2 lb 1 dei count 10 size 64 interval 100
4.2.126 mep <Instance> lck
Command:
-238
-
- Command Guide of MGSW-28240F 1
- Contents 2
- 1.1 Accessing the CLI 20
- 1.2 Command Line Modes 20
- 1.3 Requirements 21
- 2.1 Terminal Setup 22
- 2.2 Logon to the Console 24
- 2.3 Configuring IP Address 24
- Configuring IP Address 25
- 3.1 Telnet Login 27
- 4.1 clear 28
- 4.1.4 clear eps 29
- 4.1.5 clear erps 29
- 4.1.6 clear erps statistics 30
- 4.1.7 clear ip arp 30
- 4.1.26 clear ipv6 neighbors 38
- 4.1.31 clear lacp statistics 40
- 4.1.32 clear lldp statistics 41
- 4.1.40 clear mep 44
- 4.1.41 clear mvr name 44
- 4.1.42 clear mvr statistics 45
- 4.1.43 clear mvr vlan 45
- GigabitEthernet 47
- 10GigabitEthernet 47
- 4.1.52 clear statistics * 49
- 4.2 configure terminal 50
- 4.2.13 access management 55
- 4.2.14 access-list ace 56
- 4.2.18 aggregation mode 59
- 4.2.19 aggregation mode 60
- 4.2.20 banner 61
- 4.2.21 banner exec 61
- 4.2.22 banner login 62
- 4.2.23 banner motd 63
- 4.2.24 clock summer-time 63
- 4.2.25 clock timezone 64
- 4.2.29 dot1x feature 66
- 4.2.30 dot1x guest-vlan 66
- 4.2.32 dot1x max-reauth-req 67
- 4.2.36 enable password 69
- 4.2.37 enable password level 69
- 4.2.38 enable secret 70
- 4.2.39 end 71
- 4.2.43 erps <1-64> mep 73
- 4.2.44 erps <1-64> mep 74
- 4.2.47 erps <1-64> sub 75
- 4.2.51 exit 77
- 4.2.54 help 79
- 4.2.55 hostname 80
- 4.2.56.3 access-list logging 81
- 4.2.56.4 access-list policy 82
- 4.2.56.9 aggregation group 85
- 4.2.56.10 description 85
- 4.2.56.11 do 86
- 4.2.56.12 dot1x guest-vlan 86
- 4.2.56.13 dot1x port-control 87
- 4.2.56.14 dot1x radius-qos 87
- 4.2.56.15 dot1x radius-vlan 88
- 4.2.56.17 duplex 89
- 4.2.56.18 end 89
- 4.2.56.19 excessive-restart 90
- 4.2.56.20 exit 90
- 4.2.56.21 flowcontrol 91
- 4.2.56.34 ip verify source 97
- 4.2.56.40 lacp 100
- 4.2.56.41 lacp key 101
- 4.2.56.42 lacp port-priority 101
- 4.2.56.43 lacp role 102
- 4.2.56.44 lacp timeout 102
- 4.2.56.45 lldp cdp-aware 103
- 4.2.56.48 lldp receive 105
- 4.2.56.55 loop-protect 108
- 4.2.56.54 lldp transmit 108
- 4.2.56.60 media-type 111
- 4.2.56.61 mtu 111
- 4.2.56.63 mvr name 112
- 4.2.56.64 mvr vlan 113
- 4.2.56.66 no 114
- 4.2.56.67 ping ip 114
- 4.2.56.68 poe mode 115
- 4.2.56.69 poe pdcheck IP 116
- 4.2.56.70 poe pdcheck action 116
- 4.2.56.71 poe pdcheck enable 117
- 4.2.56.75 poe power limit 119
- 4.2.56.76 poe priority 119
- 4.2.56.77 poe time-range 120
- 4.2.56.78 port-security 121
- 4.2.56.82 pvlan 123
- 4.2.56.83 pvlan isolation 123
- 4.2.56.84 qos cos 124
- 4.2.56.85 qos dei 124
- 4.2.56.86 qos dpl 125
- 4.2.56.87 qos dscp-classify 125
- 4.2.56.88 qos dscp-remark 126
- 4.2.56.89 qos dscp-translate 127
- 4.2.56.90 qos map cos-tag 127
- 4.2.56.91 qos map tag-cos 128
- 4.2.56.92 qos pcp 129
- 4.2.56.93 qos policer 129
- 4.2.56.96 qos shaper 131
- 4.2.56.98 qos storm unicast 132
- 4.2.56.99 qos storm unknown 133
- 4.2.56.100 qos tag-remark 133
- 4.2.56.102 qos trust dscp 134
- 4.2.56.103 qos trust tag 135
- 4.2.56.106 shutdown 137
- 4.2.56.107 spanning-tree 137
- 4.2.56.116 speed 142
- 4.2.56.126 switchport mode 148
- 4.2.57 interface vlan 154
- 4.2.57.1 do 155
- 4.2.57.2 end 155
- 4.2.57.3 exit 156
- 4.2.57.4 ip address 156
- 4.2.57.5 ip address dhcp 157
- 4.2.57.7 ip dhcp server 158
- 4.2.57.8 ip igmp snooping 159
- 4.2.57.18 ipv6 address 165
- 4.2.57.19 ipv6 mld snooping 165
- 4.2.57.28 no 171
- 4.2.58 ip arp inspection 171
- 4.2.64 ip dhcp pool 175
- 4.2.64.1 broadcast 176
- 4.2.64.4 client-name 178
- 4.2.64.5 default-router 178
- 4.2.64.6 dns-server 179
- 4.2.64.7 do 179
- 4.2.64.8 domain-name 180
- 4.2.64.9 end 180
- 4.2.64.10 exit 181
- 4.2.64.11 hardware-address 182
- 4.2.64.12 host 182
- 4.2.64.13 lease 183
- 4.2.64.15 netbios-node-type 184
- 4.2.64.16 netbios-scope 184
- 4.2.64.17 network 185
- 4.2.64.18 nis-domain-name 186
- 4.2.64.19 nis-server 186
- 4.2.64.20 no 187
- 4.2.64.21 ntp-server 187
- 4.2.64.22 vendor 188
- 4.2.65 ip dns proxy 188
- 4.2.66 ip helper-address 189
- 4.2.68 ip http secure-server 190
- 4.2.69 ip igmp host-proxy 191
- 4.2.71 ip igmp snooping 192
- 4.2.72 ip igmp snooping vlan 192
- 4.2.73 ip igmp ssm-range 193
- 4.2.75 ip name-server 194
- 4.2.76 ip name-server dhcp 194
- 4.2.78 ip route 196
- 4.2.79 ip routing 196
- 4.2.81 ip ssh 198
- 4.2.82 ip verify source 198
- 4.2.84 ipmc profile 199
- 4.2.85.1 default range 200
- 4.2.85.2 description 201
- 4.2.85.3 do 201
- 4.2.85.4 end 202
- 4.2.85.5 exit 203
- 4.2.85.6 no 203
- 4.2.85.7 range 204
- 4.2.86 ipv6 mld host-proxy 204
- 4.2.88 ipv6 mld snooping 205
- 4.2.90 ipv6 mld ssm-range 206
- 4.2.92 ipv6 route 208
- 4.2.93 lacp system-priority 209
- 4.2.94 line 209
- 4.2.94.1 do 210
- 4.2.94.2 editing 210
- 4.2.94.3 end 211
- 4.2.94.4 exec-banner 211
- 4.2.94.5 exec-timeout 212
- 4.2.94.6 exec-timeout 213
- 4.2.94.7 exit 213
- 4.2.94.8 history size 214
- 4.2.94.9 length 214
- 4.2.94.10 location 215
- 4.2.94.11 motd-banner 215
- 4.2.94.12 no 216
- 4.2.94.13 privilege level 216
- 4.2.94.14 width 217
- 4.2.95 lldp holdtime 218
- 4.2.96 lldp med datum 218
- 4.2.97 lldp med fast 219
- 4.2.103 lldp reinit 223
- 4.2.104 lldp timer 223
- 4.2.106 logging host 225
- 4.2.107 logging level 225
- 4.2.108 logging on 226
- 4.2.109 loop-protect 226
- 4.2.138 monitor destination 247
- 4.2.139 monitor source 248
- 4.2.140 mvr 248
- 4.2.160 network-clock option 260
- 4.2.165 no 264
- 4.2.166 ntp 264
- 4.2.167 ntp server 265
- 4.2.167.1 do 265
- 4.2.167.2 end 266
- 4.2.167.3 exit 266
- 4.2.167.4 no 267
- 4.2.167.5 periodic 268
- 4.2.167.6 reboot-only 269
- 4.2.168 port-security 269
- 4.2.169 port-security aging 270
- 4.2.171 privilege 271
- 4.2.172 qos map cos-dscp 272
- 4.2.174 qos map dscp-cos 274
- 4.2.177 qos qce 278
- 4.2.178 qos qce update 279
- 4.2.179 qos qce refresh 280
- 4.2.180 qos wred 281
- 4.2.185 radius-server host 284
- 4.2.186 radius-server key 285
- 4.2.189 rmon alarm 287
- 4.2.190 rmon event 288
- 4.2.192 snmp-server 290
- 4.2.193 snmp-server access 290
- 4.2.197 snmp-server host 293
- 4.2.197.1 do 294
- 4.2.197.2 end 294
- 4.2.197.3 exit 295
- 4.2.197.4 host 295
- 4.2.197.5 no 296
- 4.2.197.6 informs 297
- 4.2.197.7 shutdown 297
- 4.2.197.8 traps 298
- 4.2.197.9 version 299
- 4.2.198.1 do 300
- 4.2.198.2 end 301
- 4.2.198.3 exit 301
- 4.2.198.4 no 302
- 4.2.206 upnp 311
- 4.2.208 upnp ttl 313
- 4.2.209 username 313
- 4.2.210 vlan 314
- 4.2.210.1 do 315
- 4.2.210.2 end 315
- 4.2.210.3 exit 316
- 4.2.210.4 name 316
- 4.2.210.5 no 317
- 4.2.212 vlan protocol 318
- 4.2.213 voice vlan 319
- 4.2.215 voice vlan class 320
- 4.2.216 voice vlan oui 321
- 4.2.217 voice vlan vid 321
- 4.2.218 web privilege group 322
- 4.3 copy 323
- 4.3.1 copy 323
- 4.4 debug 323
- 4.4.1 debug 323
- 4.5 delete 324
- 4.5.1 delete 324
- 4.6 dir 325
- 4.6.1 dir 325
- 4.7 disable 326
- 4.7.1 disable 326
- 4.8.1 do 326
- 4.9 dot1x 327
- 4.9.1 dot1x initialize 327
- 4.10 enable 327
- 4.10.1 enable 327
- 4.11 erps 328
- 4.11.1 erps 328
- 4.12 exit 329
- 4.12.1 exit 329
- 4.13 firmware 329
- 4.13.1 firmware swap 329
- 4.13.2 firmware upgrade 330
- 4.14 ip 331
- 4.15 logout 331
- 4.15.1 logout 331
- 4.16 more 332
- 4.16.1 more 332
- 4.17 no 333
- 4.17.1 no 333
- 4.18 ping 333
- 4.18.1 ping ip 333
- 4.18.2 ping ipv6 334
- 4.19 reload 335
- 4.19.1 reload cold 335
- 4.19.2 reload defaults 336
- 4.20 send 336
- 4.20.1 send 336
- 4.21 show 337
- 4.21.1 show aaa 337
- 4.21.3 show access-list 339
- 4.21.4 show access-list 340
- 4.21.6 show aggregation 343
- 4.21.7 show aggregation mode 343
- 4.21.8 show clock 344
- 4.21.9 show clock detail 344
- 4.21.11 show dot1x status 347
- 4.21.12 show eps 348
- 4.21.13 show erps 349
- 4.21.14 show evc 350
- 4.21.15 show evc statistics 351
- 4.21.16 show green-ethernet 351
- 4.21.19 show history 353
- 4.21.26 show interface vlan 358
- 4.21.27 show ip arp 359
- 4.21.33 show ip dhcp pool 364
- 4.21.34 show ip dhcp relay 365
- 4.21.35 show ip dhcp server 365
- 4.21.46 show ip route 373
- 4.21.48 show ip ssh 374
- 4.21.49 show ip statistics 375
- 4.21.51 show ipmc profile 377
- 4.21.52 show ipmc range 378
- 4.21.53 show ipv6 interface 379
- 4.21.56 show ipv6 neighbor 381
- 4.21.57 show ipv6 route 382
- 4.21.59 show lacp 385
- 4.21.60 show line 385
- 4.21.61 show link-oam 386
- 4.21.66 show logging 390
- 4.21.67 show loop-protect 391
- 4.21.69 show mep 393
- 4.21.70 show mvr 394
- 4.21.71 show network-clock 395
- 4.21.72 show ntp status 396
- 4.21.73 show platform phy 396
- 4.21.79 show privilege 400
- 4.21.84 show ptp ext 404
- 4.21.85 show pvlan 404
- 4.21.86 show pvlan isolation 405
- 4.21.87 show qos 406
- 4.21.88 show radius-server 408
- 4.21.89 show rmon alarm 409
- 4.21.90 show rmon event 410
- 4.21.91 show rmon history 410
- 4.21.92 show rmon statistics 411
- 4.21.93 show running-config 412
- 4.21.94 show snmp 414
- 4.21.95 show snmp access 416
- 4.21.97 show snmp host 417
- 4.21.101 show snmp user 423
- 4.21.102 show snmp view 424
- 4.21.103 show spanning-tree 424
- 4.21.106 show terminal 426
- 4.21.107 show upnp 427
- 4.21.108 show users 428
- 4.21.109 show version 429
- 4.21.110 show vlan 430
- 4.21.112 show vlan mac 431
- 4.21.114 show voice vlan 433
- 4.22 terminal 435
- 4.22.1 terminal editing 435
- 4.22.4 terminal length 437
- 4.22.5 terminal width 438
Related products and manuals for Routers Planet MGSW-28240F
Routers Planet MGSW-28240F User Manual
(643 pages)
(643 pages)
Routers Planet SGSW-24040 User Manual
(567 pages)
(567 pages)
Routers Planet SW-504 User Manual
(2 pages)
(2 pages)
Routers Planet VC-2400MR User Manual
(12 pages)
(12 pages)
Routers Planet VC-2400MR48 User Manual
(2 pages)
(2 pages)
Routers Planet VC-2400MR48 User Manual
(217 pages)
(217 pages)
Routers Planet WGS-803 User Manual
(2 pages)
(2 pages)
Routers Planet WGS-804HP User Manual
(2 pages)
(2 pages)
Routers Planet WGSD-10020 User Manual
(12 pages)
(12 pages)
Routers Planet WGS3-24240 User Manual
(570 pages)
(570 pages)
Routers Planet WGS3-24000 User Manual
(526 pages)
(526 pages)
Routers Planet WGSD-10020HP User Manual
(358 pages)
(358 pages)
Routers Planet WGSD-10020 User Manual
(553 pages)
(553 pages)
Routers Planet WGSD-1022C User Manual
(8 pages)
(8 pages)
Routers Planet WGSD-10020 User Manual
(557 pages)
(557 pages)
Routers Planet WGSD-10020 User Manual
(373 pages)
(373 pages)
Routers Planet WGSW-20160HP User Manual
(12 pages)
(12 pages)
Routers Planet WGSD-1022 User Manual
(355 pages)
(355 pages)
Routers Planet WGSW-28040 User Manual
(16 pages)
(16 pages)
© 2020, manymanuals.com. All rights reserved. | 3.820 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals