Planet WGSD-10020 User Manual

User’s Manual of WGSD-10020 Series VLAN Add...

User’s Manual of WGSD-10020 Series The Link Aggregation Control Protocol (LACP) provides a standardized means for exchanging information between Part

User’s Manual of WGSD-10020 Series 4.5.1 Static Aggregation This page is used to configure the Aggregation hash mode and the aggregation group. The a

User’s Manual of WGSD-10020 Series Figure 4-5-3 Aggregation Group Configuration page screenshot The page includes the following fields: .Object De

User’s Manual of WGSD-10020 Series 4.5.2 LACP Configuration Link Aggregation Control Protocol (LACP) - LACP LAG negotiate Aggregated Port links with

User’s Manual of WGSD-10020 Series  Role The Role shows the LACP activity status. The Active will transmit LACP packets each second, while Passive

User’s Manual of WGSD-10020 Series 4.5.4 LACP Port Status This page provides a status overview for LACP status for all ports. The LACP Port Status sc

User’s Manual of WGSD-10020 Series 4.5.5 LACP Port Statistics This page provides an overview for LACP statistics for all ports. The LACP Port Statist

User’s Manual of WGSD-10020 Series 4.6 VLAN 4.6.1 VLAN Overview A Virtual Local Area Network (VLAN) is a network topology configured according to a l

User’s Manual of WGSD-10020 Series 4.6.2 IEEE 802.1Q VLAN In large networks, routers are used to isolate broadcast traffic for each subnet into sep

User’s Manual of WGSD-10020 Series - Untagging - The act of stripping 802.1Q VLAN information out of the packet header. 802.1Q VLAN Tags The fig

User’s Manual of WGSD-10020 Series Security Switch Access Statistics ...

User’s Manual of WGSD-10020 Series Port VLAN ID Packets that are tagged (are carrying the 802.1Q VID information) can be transmitted from one 802.

User’s Manual of WGSD-10020 Series VLAN Classification When the switch receives a frame, it classifies the frame in one of two ways. If the fram

User’s Manual of WGSD-10020 Series  Current number of VLANs Display the current number of VLANs  VLAN Learning Display the VLAN learning mode. Th

User’s Manual of WGSD-10020 Series QinQ tunneling is used to maintain customer-specific VLAN and Layer 2 protocol configurations even when different

User’s Manual of WGSD-10020 Series VLAN Port Configuration The VLAN Port Configuration screen in Figure 4-6-2 appears. Figure 4-6-2 VLAN Port Config

User’s Manual of WGSD-10020 Series - Tagged: outgoing frames with VLAN-Tagged.  Q-in-Q Mode Sets the Managed Switch to QinQ mode, and allows the

User’s Manual of WGSD-10020 Series 4.6.5 VLAN Membership  Adding Static Members to VLANs (VLAN Index) Use the VLAN Static Table to configure port m

User’s Manual of WGSD-10020 Series click "Save". The button can be used to undo the addition of new VLANs. Buttons : Click to add new VLAN

User’s Manual of WGSD-10020 Series member ports.  VLAN User A VLAN User is a module that uses services of the VLAN management functionality to conf

User’s Manual of WGSD-10020 Series 4.6.7 VLAN Port Status This page provides VLAN Port Staus. The VLAN Port Status screen in Figure 4-6-5 appears. F

User’s Manual of WGSD-10020 Series Security Network Limit Aging...

User’s Manual of WGSD-10020 Series requests to set VLAN membership or VLAN port configuration, the following conflicts can occur: Functional Confli

User’s Manual of WGSD-10020 Series The Private VLAN screen in Figure 4-6-6 appears. Figure 4-6-6 Private VLAN Membership Configuration page screens

User’s Manual of WGSD-10020 Series For private VLANs to be applied, the switch must first be configured for standard VLAN operation When this is in

User’s Manual of WGSD-10020 Series Figure 4-6-7 Port Isolation Configuration page screenshot The page includes the following fields: Object Descri

User’s Manual of WGSD-10020 Series Figure 4-6-8 two separate VLAN diagram VLAN Group VID Untagged Members Tagged Members VLAN Group 1 1 Port-7

User’s Manual of WGSD-10020 Series 1. While [PC-4] transmit an untagged packet enters Port-4, the switch will tag it with a VLAN Tag=3. [PC-5] and [P

User’s Manual of WGSD-10020 Series Port-4,Port-5 and Port-6 : PVID=3 Port-7~Port-24 : PVID=1 5. Enable VLAN Tag for specific ports Link Type: Port-3

User’s Manual of WGSD-10020 Series Setup steps 1. Create VLAN Group Set VLAN Group 1 = Default-VLAN with VID (VLAN ID) =1 Add two VLANs – VLAN 2 and

User’s Manual of WGSD-10020 Series Figure 4-6-12 VLAN overlap port setting & VLAN 1 – The public area member assign 5. Specify Port-8 to be the

User’s Manual of WGSD-10020 Series Setup steps 1. Assign Port Mode Set Port-1~Port-4 in Isolate port. Set Port5 and Port-6 in Promiscuous port. Th

User’s Manual of WGSD-10020 Series Security Network IP Source Guard Port Mode ...

User’s Manual of WGSD-10020 Series 4.6.11 MAC-based VLAN The MAC-based VLAN enties can be configured here. This page allows for adding and deleting M

User’s Manual of WGSD-10020 Series 4.6.12 MAC-based VLAN Status This page shows MAC-based VLAN entries configured by various MAC-based VLAN users. Th

User’s Manual of WGSD-10020 Series 4.6.13 Protocol-based VLAN This page allows you to add new protocols to Group Name (unique for each Group) mapping

User’s Manual of WGSD-10020 Series sub-values. a.OUI: OUI (Organizationally Unique Identifier) is value in format of xx-xx-xx where each pair (xx) i

User’s Manual of WGSD-10020 Series The page includes the following fields: Object Description  Delete To delete a Group Name to VLAN map entry, ch

User’s Manual of WGSD-10020 Series 4.7 Spanning Tree Protocol 4.7.1 Theory The Spanning Tree protocol can be used to detect and disable network loops

User’s Manual of WGSD-10020 Series The switch sends BPDUs to communicate and construct the spanning-tree topology. All switches connected to the LAN

User’s Manual of WGSD-10020 Series Figure 4-7-1 STP Port State Transitions You can modify each port state by using management software. When you ena

User’s Manual of WGSD-10020 Series Parameter Description Default Value Bridge Identifier(Not user configurable except by setting priority below) A

User’s Manual of WGSD-10020 Series The Switch’s factory default setting should cover the majority of installations. However, it is advisable to keep

User’s Manual of WGSD-10020 Series STP Port Mcheck...

User’s Manual of WGSD-10020 Series Figure 4-7-5 Before Applying the STA Rules In this example, only the default STP values are used. Figure 4-7-6

User’s Manual of WGSD-10020 Series The switch with the lowest Bridge ID (switch C) was elected the root bridge, and the ports were selected to give a

User’s Manual of WGSD-10020 Series Basic Settings Object Description  Protocol Version The STP protocol version setting. Valid values are STP, RST

User’s Manual of WGSD-10020 Series  Port Error Recovery Timeout The time that has to pass before a port in the error-disabled state can be enabled.

User’s Manual of WGSD-10020 Series 4.7.4 CIST Port Configuration This page allows the user to inspect the current STP CIST port configurations, and

User’s Manual of WGSD-10020 Series Default: 128 Range: 0-240, in steps of 16  operEdge (state flag) Operational flag describing whether the port i

User’s Manual of WGSD-10020 Series By default, the system automatically detects the speed and duplex mode used on each port, and configures the path

User’s Manual of WGSD-10020 Series 4.7.5 MSTI Priorities This page allows the user to inspect the current STP MSTI bridge instance priority configura

User’s Manual of WGSD-10020 Series Figure 4-7-11 MSTI Configuration page screenshot The page includes the following fields: Configuration Identific

User’s Manual of WGSD-10020 Series  Configuration Revision The revision of the MSTI configuration named above. This must be an integer between 0 an

User’s Manual of WGSD-10020 Series 6.13 EEE Command...

User’s Manual of WGSD-10020 Series Figure 4-7-13 MST1 MSTI Port Configuration page screenshot The page includes the following fields: MSTx MSTI Po

User’s Manual of WGSD-10020 Series : Click to set MSTx configuration : Click to refresh the page immediately. Auto-refresh : Check this box to enable

User’s Manual of WGSD-10020 Series Forwarding Non-STP  Uptime The time since the bridge port was last initialized. Buttons : Click to refresh the

User’s Manual of WGSD-10020 Series : Click to refresh the page immediately. Auto-refresh : Check this box to enable an automatic refresh of the page

User’s Manual of WGSD-10020 Series 4.8 Multicast 4.8.1 IGMP Snooping The Internet Group Management Protocol (IGMP) lets host and routers share inform

User’s Manual of WGSD-10020 Series Figure 4-8-2 Multicast flooding Figure 4-8-3 IGMP Snooping multicast stream control 155

User’s Manual of WGSD-10020 Series IGMP Versions 1 and 2 Multicast groups allow members to join or leave at any time. IGMP provides the method for me

User’s Manual of WGSD-10020 Series message, and query messages that are specific to a given group. The states a computer will go through to join or t

User’s Manual of WGSD-10020 Series 4.8.2 IGMP Snooping Configuration This page provides IGMP Snooping related configuration. The IGMP Snooping Config

User’s Manual of WGSD-10020 Series  Fast Leave Enable the fast leave on the port.  Throtting Enable to limit the number of multicast groups to wh

User’s Manual of WGSD-10020 Series QoS Port QueueShaper Mode ...

User’s Manual of WGSD-10020 Series by the Querier. The allowed range is 1 to 255 seconds, default query interval is 125 seconds.  QRI Query Respons

User’s Manual of WGSD-10020 Series Figure 4-8-7 IGMP Snooping Port Group Filtering Configuration page screenshot The page includes the following fi

User’s Manual of WGSD-10020 Series Figure 4-8-8 IGMP Snooping Status page screenshot The page includes the following fields: Object Description 

User’s Manual of WGSD-10020 Series 4.8.6 IGMP Group Information Entries in the IGMP Group Table are shown on this page. The IGMP Group Table is sorte

User’s Manual of WGSD-10020 Series IGMP SSM Information Table. The "Start from VLAN", and "Group" input fields allow the user to

User’s Manual of WGSD-10020 Series Figure 4-8-11 MLD Snooping Configuration page screenshot The page includes the following fields: Object Descrip

User’s Manual of WGSD-10020 Series Buttons : Click to save changes. : Click to undo any changes made locally and revert to previously saved values.

User’s Manual of WGSD-10020 Series Maximum Response Code inserted into the periodic General Queries. The allowed range is 0 to 31744 in tenths of sec

User’s Manual of WGSD-10020 Series Figure 4-8-13 MLD Snooping Port Group Filtering Configuration page screenshot The page includes the following fi

User’s Manual of WGSD-10020 Series Figure 4-8-14 MLD Snooping Status page screenshot The page includes the following fields: Object Description 

User’s Manual of WGSD-10020 Series UPnP Mode ...

User’s Manual of WGSD-10020 Series 4.8.12 MLD Group Information Entries in the MLD Group Table are shown on this page. The MLD Group Table is sorted

User’s Manual of WGSD-10020 Series The "Start from VLAN", and "group" input fields allow the user to select the starting point in

User’s Manual of WGSD-10020 Series Layer 3- network, it might be necessary to replicate the multicast stream to the same group in different subnets,

User’s Manual of WGSD-10020 Series  Type Specify the MVR port type on the port.  Immediate Leave Enable the fast leave on the port. Buttons : Cl

User’s Manual of WGSD-10020 Series 4.8.16 MVR Groups Information Entries in the MVR Group Table are shown on this page. The MVR Group Table is sorted

User’s Manual of WGSD-10020 Series 4.9 Quality of Service 4.9.1 Understand QOS Quality of Service (QoS) is an advanced traffic prioritization fea

User’s Manual of WGSD-10020 Series 4.9.2 Port Policing This page allows you to configure the Policer settings for all switch ports. The Port Policin

User’s Manual of WGSD-10020 Series 4.9.3 Port Classification This page allows you to configure the basic QoS Ingress Classification settings for all

User’s Manual of WGSD-10020 Series Buttons : Click to save changes. : Click to undo any changes made locally and revert to previously saved values.

User’s Manual of WGSD-10020 Series Object Description  Tag Classification Controls the classification mode for tagged frames on this port. Disab

User’s Manual of WGSD-10020 Series IPMC SSM...

User’s Manual of WGSD-10020 Series For more detail, please refer to chapter 4.9.5.1.  Mode Shows the scheduling mode for this port.  Q0 ~ Q5 Show

User’s Manual of WGSD-10020 Series Figure 4-9-6 QoS Egress Port Schedule and Shapers page screenshot The page includes the following fields: Object

User’s Manual of WGSD-10020 Series restricted to 100-1000000 when the "Unit" is "kbps", and it is restricted to 1-3300 when the &

User’s Manual of WGSD-10020 Series 4.9.6.1 QoS Egress Port Tag Remarking The QoS Egress Port Tag Remarking for a specific port are configured on this

User’s Manual of WGSD-10020 Series Figure 4-9-9 QoS Port DSCP Configuration page screenshot The page includes the following fields: Object Descrip

User’s Manual of WGSD-10020 Series Buttons : Click to save changes. : Click to undo any changes made locally and revert to previously saved values.

User’s Manual of WGSD-10020 Series Figure 4-9-10 DSCP-Based QoS Ingress Classification page screenshot 186

User’s Manual of WGSD-10020 Series The page includes the following fields: Object Description  DSCP Maximum number of support ed DSCP values are 6

User’s Manual of WGSD-10020 Series 188

User’s Manual of WGSD-10020 Series Figure 4-9-11 DSCP Translation page screenshot The page includes the following fields: Object Description  DS

User’s Manual of WGSD-10020 Series Power Disconnection Scenarios ...

User’s Manual of WGSD-10020 Series 4.9.10 DSCP Classification This page allows you to map DSCP value to a QoS Class and DPL value. The DSCP Classific

User’s Manual of WGSD-10020 Series 4.9.11 QoS Control List This page shows the QoS Control List(QCL), which is made up of the QCEs. Each row descri

User’s Manual of WGSD-10020 Series range 1-4095 or 'Any'  Confict Displays QCE status. It may happen that resources required to add a QCE

User’s Manual of WGSD-10020 Series Figure 4-9-14 QCE Configuration page screenshot The page includes the following fields: Object Description  P

User’s Manual of WGSD-10020 Series 3. LLC 4. SNAP 5. IPv4 6. IPv6 Note: all frame types are explained below.  Any Allow all types of frames. 

User’s Manual of WGSD-10020 Series  Action Configuration Class QoS Class: "class (0-7)", default- basic classification DP Valid DP Leve

User’s Manual of WGSD-10020 Series IPv4: The QCE will match only IPV4 frames. IPv6: The QCE will match only IPV6 frames.  Action Indicates the cl

User’s Manual of WGSD-10020 Series The page includes the following fields: Object Description  Frame Type The settings in a particular row apply t

User’s Manual of WGSD-10020 Series Buttons : Click to refresh the page immediately. : Clears the counters for all ports. Auto-refresh : Check this b

User’s Manual of WGSD-10020 Series Object Description  Mode Indicates the Voice VLAN mode operation. We must disable MSTP feature before we enable

User’s Manual of WGSD-10020 Series Trademarks Copyright © PLANET Technology Corp. 2012. Contents subject to which revision without prior notice. PL

User’s Manual of WGSD-10020 Series 1. INTRODUTION The PLANET 8-Port 10/100/1000Mbps + 2 100/1000X SFP Managed Ethernet Switch series –WGSD switch are

User’s Manual of WGSD-10020 Series 4.9.16 Voice VLAN OUI Table Configure VOICE VLAN OUI table on this page. The maximum entry number is 16. Modifying

User’s Manual of WGSD-10020 Series 4.10 Access Control Lists ACL is an acronym for Access Control List. It is the list table of ACEs, containing acce

User’s Manual of WGSD-10020 Series EType: The ACE will match Ethernet Type frames. Note that an Ethernet Type based ACE will not get matched by IP an

User’s Manual of WGSD-10020 Series Figure 4-10-2 Access Control List Configuration page screenshot The page includes the following fields: Object

User’s Manual of WGSD-10020 Series Disabled: Port shut down is disabled for the ACE.  Counter The counter indicates the number of times the ACE

User’s Manual of WGSD-10020 Series Figure 4-10-3 ACE Configuration page screenshot The page includes the following fields: Object Description  I

User’s Manual of WGSD-10020 Series  Action Specify the action to take with a frame that hits this ACE. Permit: The frame that hits this ACE is gr

User’s Manual of WGSD-10020 Series  DMAC Value When "Specific" is selected for the DMAC filter, you can enter a specific destination MAC

User’s Manual of WGSD-10020 Series Host: Sender IP filter is set to Host. Specify the sender IP address in the SIP Address field that appears. Netw

User’s Manual of WGSD-10020 Series Any: Any value is allowed ("don't-care").  Ethernet Specify whether frames can hit the action acc

User’s Manual of WGSD-10020 Series High-Performance, Cost-effective Gigabit solution for backbone of SMB The PLANET WGSD-10020 series is the Layer 2

User’s Manual of WGSD-10020 Series No: IPv4 frames where the options flag is set must not be able to match this entry. Yes: IPv4 frames where the op

User’s Manual of WGSD-10020 Series appears.  ICMP Code Value When "Specific" is selected for the ICMP code filter, you can enter a specif

User’s Manual of WGSD-10020 Series 0: TCP frames where the FIN field is set must not be able to match this entry. 1: TCP frames where the FIN field

User’s Manual of WGSD-10020 Series : Click to undo any changes made locally and revert to previously saved values. : Return to the previous page. 4

User’s Manual of WGSD-10020 Series The default value is "Disabled".  Logging Specify the logging operation of this port. The allowed valu

User’s Manual of WGSD-10020 Series Figure 4-10-5 ACL Rate Limiter Configuration page screenshot The page includes the following fields: Object Des

User’s Manual of WGSD-10020 Series 4.11 Authentication This section is to control the access of the Managed Switch, includes the user access and mana

User’s Manual of WGSD-10020 Series to authenticate. The disadvantage is that MAC addresses can be spoofed by malicious users, equipment whose MAC add

User’s Manual of WGSD-10020 Series Figure 4-11-1  Client—the device (workstation) that requests access to the LAN and switch services and respond

User’s Manual of WGSD-10020 Series authentication server must support EAP within the native frame format. When the switch receives frames from the au

User’s Manual of WGSD-10020 Series The network administrators can now construct highly secured corporate networks with considerably less time and eff

User’s Manual of WGSD-10020 Series  Ports in Authorized and Unauthorized States The switch port state determines whether or not the client is grant

User’s Manual of WGSD-10020 Series The page includes the following fields: Object Description  Client The management client for which the configur

User’s Manual of WGSD-10020 Series Figure 4-11-4 Network Access Server Configuration page screenshot The page includes the following fields: System

User’s Manual of WGSD-10020 Series configuration has changed. It does not involve communication between the switch and the client, and therefore does

User’s Manual of WGSD-10020 Series In MAC-based Auth. mode, the The switch will ignore new frames coming from the client during the hold time. The Ho

User’s Manual of WGSD-10020 Series this setting. The value can only be changed if the Guest VLAN option is globally enabled. Valid values are in the

User’s Manual of WGSD-10020 Series switch's IP address, name, and the supplicant's port number on the switch. EAP is very flexible, in that

User’s Manual of WGSD-10020 Series successfully authenticated.  Multi 802.1X In port-based 802.1X authentication, once a supplicant is successful

User’s Manual of WGSD-10020 Series particular client, using the Port Security module. Only then will frames from the client be forwarded on the switc

User’s Manual of WGSD-10020 Series  RADIUS-Assigned VLAN Enabled When RADIUS-Assigned VLAN is both globally enabled and enabled (checked) for a giv

User’s Manual of WGSD-10020 Series 1.4 Product Features  Physical Port WGSD-10020  8-Port 10/100/1000Base-T Gigabit Ethernet RJ-45  2 100/10

User’s Manual of WGSD-10020 Series This option is only available for EAPOL-based modes, i.e.:  Port-based 802.1X  Single 802.1X  Multi 802.1X F

User’s Manual of WGSD-10020 Series  Restart Two buttons are available for each row. The buttons are only enabled when authentication is globally en

User’s Manual of WGSD-10020 Series 4.11.4 Network Access Overview This page provides an overview of the current NAS port states for the selected swit

User’s Manual of WGSD-10020 Series Buttons : Click to refresh the page immediately. Auto-refresh : Check this box to enable an automatic refresh of t

User’s Manual of WGSD-10020 Series Port Counters Object Description These supplicant frame counters are available for the following administrative s

User’s Manual of WGSD-10020 Series which the Packet Body Length field is invalid. Tx Total dot1xAuthEapolFramesTx The number of EAPOL frames of any t

User’s Manual of WGSD-10020 Series table). Rx Other Requests dot1xAuthBackendOtherRequestsToSupplicant 802.1X-based: Counts the number of times that

User’s Manual of WGSD-10020 Series packets sent from the switch towards the backend server for a given port (left-most table) or client (right-most t

User’s Manual of WGSD-10020 Series MAC-based Auth. The table is identical to and is placed next to the Port Counters table, and will be empty if no M

User’s Manual of WGSD-10020 Series Click to clear the counters for the selected port. : This button is available in the following modes: • Multi 802.

User’s Manual of WGSD-10020 Series  Quality of Service Ingress Shaper and Egress Rate Limit per port bandwidth control 8 priority queues on a

User’s Manual of WGSD-10020 Series 4.11.6 Authentication Server Configuration This page allows you to configure the Authentication Servers. The Authe

User’s Manual of WGSD-10020 Series Port State These setting are common for all of the Authentication Servers. Object Description  Timeout The Time

User’s Manual of WGSD-10020 Series RADIUS Accounting Server Configuration The table has one row for each RADIUS Accounting Server and a number of col

User’s Manual of WGSD-10020 Series 4.11.7 RADIUS Overview This page provides an overview of the status of the RADIUS servers configurable on the Auth

User’s Manual of WGSD-10020 Series but will get re-enabled when the dead-time expires. The number of seconds left before this occurs is displayed in

User’s Manual of WGSD-10020 Series Figure 4-11-9 RADIUS Authentication/Accounting for Server Overview page screenshot The page includes the followi

User’s Manual of WGSD-10020 Series ccessRejects Access-Reject packets (valid or invalid) received from the server. Rx Access Challenges radiusAuthCl

User’s Manual of WGSD-10020 Series Requests ccessRequests to the server. This does not include retransmissions. Tx Access Retransmissions radiusAuth

User’s Manual of WGSD-10020 Series up and running, and the RADIUS module is ready to accept access attempts. Dead (X seconds left): Access attempts w

User’s Manual of WGSD-10020 Series Rx Bad Authenticators radiusAcctClientExtBadAuthenticators The number of RADIUS packets containing invalid authent

User’s Manual of WGSD-10020 Series - SSH / SSL secure access Four RMON groups (history, statistics, alarms, and events) IPv6 IP Address / NT

User’s Manual of WGSD-10020 Series different server is counted as a Request as well as a timeout. This section contains information about the state o

User’s Manual of WGSD-10020 Series 4.11.9 Windows Platform RADIUS Server Configuration Setup the RADIUS server and assign the client IP address to th

User’s Manual of WGSD-10020 Series Figure 4-11-11 Windows Server – add new RADIUS client setting 3. Assign the client IP address to the Managed s

User’s Manual of WGSD-10020 Series 4. The shared secret key should be as same as the key configured on the Managed Switch. Figure 4-11-13 Windows S

User’s Manual of WGSD-10020 Series 5. Configure ports attribute of 802.1X, the same as “802.1X Port Configuration”. Figure 4-11-14 802.1x Port Conf

User’s Manual of WGSD-10020 Series 5. Enter ” Active Directory Users and Computers”, create legal user data, the next, right-click a user what you cr

User’s Manual of WGSD-10020 Series Set the Ports Authenticate Status to “Force Authorized” if the port is connected to the RADIUS server or the port

User’s Manual of WGSD-10020 Series 4. Select “Authentication” tab. 5. Select “Enable network access control using IEEE 802.1X” to enable 802.1x aut

User’s Manual of WGSD-10020 Series Figure 4-11-20 Windows client popup login request message 9. Enter the user name, password and the logon domain

User’s Manual of WGSD-10020 Series 4.12 Security This section is to control the access of the Managed Switch, includes the user access and management

User’s Manual of WGSD-10020 Series 1.5 Product Specification Product WGSD-10020 WGSD-10020HP Hardware Specification Copper Ports 8 10/ 100/1000B

User’s Manual of WGSD-10020 Series Figure 4-12-1 Port Limit Control Configuration Overview page screenshot The page includes the following fields:

User’s Manual of WGSD-10020 Series To understand why aging may be desired, consider the following scenario: Suppose an end-host is connected to a 3rd

User’s Manual of WGSD-10020 Series no new will be learned. Even if the link is physically disconnected and reconnected on the port (by disconnecting

User’s Manual of WGSD-10020 Series Figure 4-12-2 Access Management Configuration Overview page screenshot The page includes the following fields: O

User’s Manual of WGSD-10020 Series Figure 4-12-3 Access Management Statistics Overview page screenshot The page includes the following fields: Obje

User’s Manual of WGSD-10020 Series The page includes the following fields: Object Description  Mode Indicates the HTTPS mode operation. Possible m

User’s Manual of WGSD-10020 Series Buttons : Click to save changes. : Click to undo any changes made locally and revert to previously saved values.

User’s Manual of WGSD-10020 Series Object Description  User Module Name The full name of a module that may request Port Security services.  Abbr

User’s Manual of WGSD-10020 Series 4.12.7 Port Security Detail This page shows the MAC addresses secured by the Port Security module. Port Security i

User’s Manual of WGSD-10020 Series 4.12.8 DHCP Snooping DHCP Snooping is used to block intruder on the untrusted ports of DUT when it tries to interv

User’s Manual of WGSD-10020 Series Secure Management Interface SSH, SSL, SNMP v3 Port configuration Port disable/enable. Auto-negotiation 10/100/10

User’s Manual of WGSD-10020 Series : Click to save changes. : Click to undo any changes made locally and revert to previously saved values. 4.12.9

User’s Manual of WGSD-10020 Series  Rx and Tx Release The number of release (option 53 with value 7) packets received and transmitted. Rx and Tx

User’s Manual of WGSD-10020 Series Figure 4-12-10 IP Source Guard Configuration screen page screenshot The page includes the following fields: Obje

User’s Manual of WGSD-10020 Series 4.12.11 IP Source Guard Static Table This page provides Static IP Source Guard Table. The Static IP Source Guard T

User’s Manual of WGSD-10020 Series Figure 4-12-12 ARP Inspection Configuration screen page screenshot The page includes the following fields: Objec

User’s Manual of WGSD-10020 Series 4.12.13 ARP Inspection Static Table This page provides Static ARP Inspection Table. The Static ARP Inspection Tabl

User’s Manual of WGSD-10020 Series 4.13 Address Table Switching of frames is based upon the DMAC address contained in the frame. The Managed Switch b

User’s Manual of WGSD-10020 Series Aging Configuration By default, dynamic entries are removed from the MAC table after 300 seconds. This removal is

User’s Manual of WGSD-10020 Series Buttons : Click to add a new entry. : Click to save changes. : Click to undo any changes made locally and revert t

User’s Manual of WGSD-10020 Series Object Description  Type Indicates whether the entry is a static or dynamic entry.  VLAN The VLAN ID of the e

User’s Manual of WGSD-10020 Series RFC-2737 Entity MIB RFC-2618 RADIUS Client MIB RFC-2933 IGMP-STD-MIB RFC3411 SNMP-Frameworks-MIB IEEE 802.1X PAE

User’s Manual of WGSD-10020 Series more entries" is shown in the displayed table. Use the “|<<” button to start over. The page includes

User’s Manual of WGSD-10020 Series The "Start from port address", "VLAN", "IP address" and "IP mask" input fi

User’s Manual of WGSD-10020 Series 4.14 LLDP 4.14.1 Link Layer Discovery Protocol Link Layer Discovery Protocol (LLDP) is used to discover basic in

User’s Manual of WGSD-10020 Series The page includes the following fields: LLDP Parameters Object Description  Tx Interval The switch is periodica

User’s Manual of WGSD-10020 Series  Mode Select LLDP mode. Rx only The switch will not send out LLDP information, but LLDP information from neigh

User’s Manual of WGSD-10020 Series 4.14.3 LLDPMED Configuration This page allows you to configure the LLDP-MED. The LLDPMED Configuration screen in F

User’s Manual of WGSD-10020 Series advertise LLDP-MED TLVs in outgoing LLDPDUs on the associated port. The LLDP-MED application will temporarily spee

User’s Manual of WGSD-10020 Series WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327, Prime Meridian Name: Greenwich. NAD83/NAVD88

User’s Manual of WGSD-10020 Series  Building Building (structure) - Example: Low Library  Apartment Unit (Apartment, suite) - Example: Apt 42 

User’s Manual of WGSD-10020 Series 4. Video Conferencing 5. Streaming Video 6. Control / Signaling (conditionally support a separate network policy f

User’s Manual of WGSD-10020 Series 2. INSTALLATION This section describes the hardware features and installation of the Managed Switch on the desktop

User’s Manual of WGSD-10020 Series Streaming Video - for use by broadcast or multicast based video content distribution and other similar application

User’s Manual of WGSD-10020 Series Buttons : click to add new policy. : Click to save changes. : Click to undo any changes made locally and revert to

User’s Manual of WGSD-10020 Series 4. IEEE 802.11 Wireless Access Point 5. Any device that supports the IEEE 802.1AB and MED extensions defined by TI

User’s Manual of WGSD-10020 Series communication appliances that directly support the end user. Discovery services defined in this class include prov

User’s Manual of WGSD-10020 Series Defined: The network policy is defined.  TAG TAG is indicating whether the specified application type is using a

User’s Manual of WGSD-10020 Series  Remote Port ID The Remote Port ID is the identification of the neighbor port.  System Name System Name is the

User’s Manual of WGSD-10020 Series 4.14.6 Port Statistics This page provides an overview of all LLDP traffic. Two types of counters are shown. Global

User’s Manual of WGSD-10020 Series Object Description  Local Port The port on which LLDP frames are received or transmitted.  Tx Frames The numb

User’s Manual of WGSD-10020 Series This page provides an overview of EEE information exchanged by LLDP. The LLDP Neighbors EEE Information screen

User’s Manual of WGSD-10020 Series  Resolved Rx Tw The resolved Rx Tw for this link. Note : NOT the link parther The resolved value that is the act

User’s Manual of WGSD-10020 Series TABLE OF CONETNTS 1. INTRODUTION ...

User’s Manual of WGSD-10020 Series Reset Button Pressed and Released Function < 5 sec: System reboot Reboot the Managed Switch > 5 sec: Fact

User’s Manual of WGSD-10020 Series 4.15 Network Diagnostics This section provide the Physical layer and IP layer network diagnostics tools for troubl

User’s Manual of WGSD-10020 Series Figure 4-15-1 ICMP Ping page screenshot The page includes the following fields: Object Description  IP Addres

User’s Manual of WGSD-10020 Series Object Description  IPv6 Address The destination IPv6 Address.  Ping Size The payload size of the ICMPv6 pack

User’s Manual of WGSD-10020 Series  Remote IP Address The destination IP Address.  Ping Size The payload size of the ICMP packet. Values range fr

User’s Manual of WGSD-10020 Series  Cable Status Port: Port number. Pair: The status of the cable pair. Length: The length (in meters) of the cable

User’s Manual of WGSD-10020 Series 4.16 Power over Ethernet (WGSD-10020HP) Providing up to 8 PoE, in-line power interface, the WGSD-10020HP PoE Switc

User’s Manual of WGSD-10020 Series 3~12 watts PoE Splitter PoE Splitter split the PoE 56V DC over the Ethernet cable into 5/12V DC power output. It

User’s Manual of WGSD-10020 Series In this mode the Maximum Power fields have no effect.  Allocation mode In this mode the user allocates the amo

User’s Manual of WGSD-10020 Series The page includes the following fields: Object Description  System PoE Admin Mode Allows user enable or disable

User’s Manual of WGSD-10020 Series Class Usage Range of maximum power used by the PD Class Dsecription 0 Default 0.44 to 12.95 Watts Classificat

User’s Manual of WGSD-10020 Series Per 100/1000Base-X SFP interfaces LED Color Function 1000 Green Lights to indicate the link through that port

User’s Manual of WGSD-10020 Series class3 level on the 802.3at mode will be reserved the same PoE power with 802.3af mode.  Priority The Priority r

User’s Manual of WGSD-10020 Series 4.16.4 PoE Status This page allows the user to inspect the total power consumption, total power reserved and curre

User’s Manual of WGSD-10020 Series  Port Status The Port Status shows the port's status.  Total Show the total watts usage of all PDs. Butt

User’s Manual of WGSD-10020 Series The page includes the following fields: Object Description  Profile Set the schedule profile mode. Possible por

User’s Manual of WGSD-10020 Series 4.16.6 LLDP PoE Neighbours This page provides a status overview for all LLDP PoE neighbors. The displayed table co

User’s Manual of WGSD-10020 Series 4.16.7 PD Alvie-check WGSD-10020HP PoE switch can be configured to monitor connected PD’s status in real-time via

User’s Manual of WGSD-10020 Series  Reboot Time (30~180s) This column allows user to set the PoE device rebooting time, due to there are so many ki

User’s Manual of WGSD-10020 Series 5. COMMAND LINE INTERFACE 5.1 Accessing the CLI When accessing the management interface for the switch over a di

User’s Manual of WGSD-10020 Series Configure IP address The SGSW Managed Switch is shipped with default IP address as following. IP Address: 192.1

User’s Manual of WGSD-10020 Series Figure 5-3 Set IP address screen 4. Repeat Step 1 to check if the IP address is changed. If the IP address is s

User’s Manual of WGSD-10020 Series 2.1.3 Switch Rear Panel The rear panel of the Managed Switch indicates an AC inlet power socket, which accepts inp

User’s Manual of WGSD-10020 Series 5.2 Telnet Login The Managed Switch also supports telnet for remote management. The switch asks for user name and

User’s Manual of WGSD-10020 Series 6. Command Line Mode The CLI groups all the commands in appropriate modes according to the nature of the command.

User’s Manual of WGSD-10020 Series Show system configuration. Syntax: System Configuration [all] [<port_list>] Parameters: all : Show

User’s Manual of WGSD-10020 Series System Log Server Mode : Disabled System Log Server Address : System Log Level : Info WGSD-10020

User’s Manual of WGSD-10020 Series Example: To show the log server mode: WGSD-10020HP:/>System log server mode System Log Server Mode : Dis

User’s Manual of WGSD-10020 Series Default Setting: empty Example: To set device contact: WGSD-10020HP:/>System contact WGSD-10020HP-Test Sy

User’s Manual of WGSD-10020 Series clear : Clear system location Default Setting: empty Example: To set device location: WGSD-10020HP:/>S

User’s Manual of WGSD-10020 Series Parameters: <offset>: Time zone offset in minutes (-720 to 720) relative to UTC Default Setting: 0 Exampl

User’s Manual of WGSD-10020 Series 1 Info - Switch just made a cold boot. 2 Info 1970-01-01T00:00:05+00:00 Link up on port 8 WGSD-100

User’s Manual of WGSD-10020 Series Syntax: System Load Example: To show current CPU load: WGSD-10020HP:/>system load Load average(100ms, 1s, 1

User’s Manual of WGSD-10020 Series 2.2 Install the Switch This section describes how to install your Managed Switch and make connections to the Manag

User’s Manual of WGSD-10020 Series 6.2 IP Command IP Configuration Description: Show IP configuration. Syntax: IP Configuration Example: Show IP

User’s Manual of WGSD-10020 Series Parameters: enable : Enable or renew DHCP client disable: Disable DHCP client Default Setting: Disable Example:

User’s Manual of WGSD-10020 Series IP Ping Description: Ping IP address (ICMP echo). Syntax: IP Ping <ip_addr_string> [<ping_length>] P

User’s Manual of WGSD-10020 Series WGSD-10020HP:/>ip dns 168.95.1.1 IP DNS Proxy Description: Set or show the IP DNS Proxy mode. Syntax: IP DNS

User’s Manual of WGSD-10020 Series Enable IPv6 autoconfig function: WGSD-10020HP:/>ip ipv6 autoconfig enable IPv6 Setup Description: Set or show

User’s Manual of WGSD-10020 Series IPv6 Ping Description: Ping IPv6 address (ICMPv6 echo). Syntax: IP IPv6 Ping6 <ipv6_addr> [<ping_length&

User’s Manual of WGSD-10020 Series NTP Mode : Disabled Idx Server IP host address (a.b.c.d) or a host name string --- ------------------------

User’s Manual of WGSD-10020 Series Parameters: <server_index> : The server index (1-5) <ip_addr_string>: IP host address (a.b.c.d) or a

User’s Manual of WGSD-10020 Series <server_index>: The server index (1-5) Example: To delete NTP server: WGSD-10020HP:/>ip ntp server dele

User’s Manual of WGSD-10020 Series 6.3 Port Management Command Port Configuration Description: Show port configuration. Syntax: Port Configuration

User’s Manual of WGSD-10020 Series Step5: Supply power to the Managed Switch. Connect one end of the power cable to the Managed Switch. Connect the p

User’s Manual of WGSD-10020 Series Parameters: <port_list>: Port list or 'all', default: All ports auto : Auto negotiation of s

User’s Manual of WGSD-10020 Series Port State Description: Set or show the port administrative state. Syntax: Port State [<port_list>] [enable

User’s Manual of WGSD-10020 Series Port Power Description: Set or show the port PHY power mode. Syntax: Port Power [<port_list>] [enable|disab

User’s Manual of WGSD-10020 Series Example: WGSD-10020HP:/>port excessive 1 restart Port Statistics Description: Show port statistics. Syntax:

User’s Manual of WGSD-10020 Series Port SFP Description: Show SFP port information. Syntax: Port SFP [<port_list>] Parameters: <port_list&

User’s Manual of WGSD-10020 Series 6.4 MAC Address Table Command MAC Configuration Description: Show MAC address table configuration. Syntax: MAC Co

User’s Manual of WGSD-10020 Series Add MAC address table entry. Syntax: MAC Add <mac_addr> <port_list> [<vid>] Parameters: <ma

User’s Manual of WGSD-10020 Series Parameters: <mac_addr>: MAC address (xx-xx-xx-xx-xx-xx) <vid> : VLAN ID (1-4095), default: 1 Exam

User’s Manual of WGSD-10020 Series auto : Automatic learning disable: Disable learning secure : Secure learning (default: Show learn mode) Default

User’s Manual of WGSD-10020 Series MAC Statistics Description: Show MAC address table statistics. Syntax: MAC Statistics [<port_list>] Parame

User’s Manual of WGSD-10020 Series Figure 2-9 Mounting WGSD-10020 in a Rack Step6: Proceeds with the steps 4 and steps 5 of session 2.2.1 Desktop I

User’s Manual of WGSD-10020 Series 6.5 VLAN Configuration Command VLAN Configuration Description: Show VLAN configuration. Syntax: VLAN Configuratio

User’s Manual of WGSD-10020 Series Syntax: VLAN PVID [<port_list>] [<vid>|none] Parameters: <port_list>: Port list or 'all&a

User’s Manual of WGSD-10020 Series VLAN Ingress Filter Description: Set or show the port VLAN ingress filter. Syntax: VLAN IngressFilter [<port_l

User’s Manual of WGSD-10020 Series WGSD-10020HP:/>vlan mode portbased VLAN Link Type Description: Set or show the port VLAN link type. Syntax:

User’s Manual of WGSD-10020 Series Example: Set port2 in man port WGSD-10020HP:/>vlan qinq 2 man VLAN Ethernet Type Description: Set or show

User’s Manual of WGSD-10020 Series Default Setting: 1 Example: Add port1 to port4 in VLAN10 WGSD-10020HP:/>vlan add 10 1-4 VLAN Forbidden Ad

User’s Manual of WGSD-10020 Series VLAN Forbidden Delete Description: Delete VLAN entry. Syntax: LAN Forbidden Delete <vid>|<name> Para

User’s Manual of WGSD-10020 Series <vid> : VLAN ID (1-4095), default: Show all VLANs name : VLAN name string <name>: VLAN name - Maximum

User’s Manual of WGSD-10020 Series VLAN Name Delete Description: Delete VLAN Name to VLAN ID Mapping. Syntax: VLAN Name Delete <name> Paramet

User’s Manual of WGSD-10020 Series VLAN Status Description: VLAN Port Configuration Status. Syntax: VLAN Status [<port_list>] [combined|static

User’s Manual of WGSD-10020 Series  Approved PLANET SFP Transceivers PLANET Managed Switch supports both Single mode and Multi-mode SFP transceiver

User’s Manual of WGSD-10020 Series 6.6 Private VLAN Configuration Command PVLAN Configuration Description: Show Private VLAN configuration. Syntax:

User’s Manual of WGSD-10020 Series PVLAN Add Description: Add or modify Private VLAN entry. Syntax: PVLAN Add <pvlan_id> [<port_list>]

User’s Manual of WGSD-10020 Series PVLAN Lookup [<pvlan_id>] Parameters: <pvlan_id>: Private VLAN ID, default: Show all PVLANs. The allo

User’s Manual of WGSD-10020 Series 6.7 Security Command Security Switch User Configuration Description: Show users configuration. Syntax: Security S

User’s Manual of WGSD-10020 Series Example: Add new user: username: test, password: test & privilege: 10 WGSD-10020HP:/>security switch use

User’s Manual of WGSD-10020 Series CRO CRW SRO SRW -------------------------------- --- --- --- --- Aggregation

User’s Manual of WGSD-10020 Series <group_name>: Privilege group name <cro> : Configuration read-only privilege level (1-15) <c

User’s Manual of WGSD-10020 Series ------- ---------------------- ----------------------------- console local Disabl

User’s Manual of WGSD-10020 Series Security Switch SSH Configuration Description: Show SSH configuration. Syntax: Security Switch SSH Configuration

User’s Manual of WGSD-10020 Series Security Switch HTTPs Configuration Description: Show HTTPS configuration. Syntax: Security Switch HTTPS Configur

User’s Manual of WGSD-10020 Series Converter.. 3. Check the LNK/ACT LED of the SFP slot on the front of the Managed Switch. Ensure that the SFP tran

User’s Manual of WGSD-10020 Series Security Switch HTTPs Redirect Description: Set or show the HTTPS redirect mode. Automatic redirect web browser t

User’s Manual of WGSD-10020 Series System Access number of entries: 0 Security Switch Access Mode Description: Set or show the access management mo

User’s Manual of WGSD-10020 Series System Access Mode : Disabled W: WEB/HTTPS S: SNMP T: TELNET/SSH Idx Start IP Address End IP Addre

User’s Manual of WGSD-10020 Series <access_id> : entry index (1-16) <start_ip_addr>: Start IP address (a.b.c.d) <end_ip_addr> :

User’s Manual of WGSD-10020 Series WGSD-10020HP:/> security switch access add 2001::0001 2001::0100 web Security Switch Access Delete Descriptio

User’s Manual of WGSD-10020 Series Syntax: Security Switch Access Clear Example: Clear access management entry. WGSD-10020HP:/>security switch

User’s Manual of WGSD-10020 Series Security Switch SNMP Mode Description: Set or show the SNMP mode. Syntax: Security Switch SNMP Mode [enable|disab

User’s Manual of WGSD-10020 Series WGSD-10020HP:/>security switch snmp version 3 Security Switch SNMP Read Community Description: Set or show th

User’s Manual of WGSD-10020 Series Example: Set public value in SNMP write community. WGSD-10020HP:/>security switch snmp write community publi

User’s Manual of WGSD-10020 Series Default Setting: 1 Example: Set SNMP trap version in version 2c. WGSD-10020HP:/>security switch snmp trap v

User’s Manual of WGSD-10020 Series 3. SWITCH MANAGEMENT This chapter explains the methods that you can use to configure management access to the Mana

User’s Manual of WGSD-10020 Series Example: Set SNMP trap destination address for 192.168.0.20 WGSD-10020HP:/>security switch snmp trap destina

User’s Manual of WGSD-10020 Series Default Setting: enable Example: Disable SNMP trap authentication failure WGSD-10020HP:/>security switch sn

User’s Manual of WGSD-10020 Series disable: Disable SNMP trap inform (default: Show SNMP inform mode) Default Setting: enable Example: Disable S

User’s Manual of WGSD-10020 Series Parameters: <retries>: SNMP trap inform retransmited times (0-255) (default: Show SNMP trap inform retry tim

User’s Manual of WGSD-10020 Series Syntax: Security Switch SNMP Trap Security Engine ID [<engineid>] Parameters: <engineid>: Engine ID,

User’s Manual of WGSD-10020 Series Default Setting: 800007e5017f000001 Example: Set 800007e5017f000002 for SNMPv3 local engine ID WGSD-10020HP:

User’s Manual of WGSD-10020 Series Example: Delete SNMPv3 community entry WGSD-10020HP:/>security switch snmp community delete 3 Security Switc

User’s Manual of WGSD-10020 Series md5 : An optional flag to indicate that this user using MD5 authentication protocol. The allowed length

User’s Manual of WGSD-10020 Series Parameters: <engineid> : Engine ID, the format may not be all zeros or all 'ff'H and is restr

User’s Manual of WGSD-10020 Series Add or modify SNMPv3 group entry. The entry index key are <security_model> and <security_name>. Synta

User’s Manual of WGSD-10020 Series 3.2 Management Access Overview The Managed Switch gives you the flexibility to access and manage it using any or a

User’s Manual of WGSD-10020 Series Lookup SNMPv3 group entry. Syntax: Security Switch SNMP Group Lookup [<index>] Parameters: <index>:

User’s Manual of WGSD-10020 Series WGSD-10020HP:/>security switch snmp view add snmpv3_view include .1 Security Switch SNMP View Delete Descript

User’s Manual of WGSD-10020 Series Security Switch SNMP Access Add Description: Add or modify SNMPv3 access entry. The entry index key are <group_

User’s Manual of WGSD-10020 Series Syntax: Security Switch SNMP Access Delete <index> Parameters: <index>: entry index (1-64) Example:

User’s Manual of WGSD-10020 Series Security Network Psec Switch [<port_list>] Parameters: <port_list>: Port list or 'all', def

User’s Manual of WGSD-10020 Series Show MAC address learned on port 1 WGSD-10020HP:/>security network psec port 1 Port 1: ------- MAC Address

User’s Manual of WGSD-10020 Series 5 Disabled 4 None 6 Disabled 4 None 7 Disabled 4 None 8 Disabled 4 Non

User’s Manual of WGSD-10020 Series disable : Disable aging (default: Show current enabledness of aging) Default Setting: disable Example: Enable

User’s Manual of WGSD-10020 Series enable : Enable port security on this port disable : Disable port security on this port (default: Show current po

User’s Manual of WGSD-10020 Series Syntax: Security Network Limit Action [<port_list>] [none|trap|shut|trap_shut] Parameters: <port_list>

User’s Manual of WGSD-10020 Series 4.2.5 Privilege Levels ...

User’s Manual of WGSD-10020 Series Figure 3-1 Console management Direct Access Direct access to the administration console is achieved by directl

User’s Manual of WGSD-10020 Series Security Network NAS Configuration Description: Show 802.1X configuration. Syntax: Security Network NAS Configura

User’s Manual of WGSD-10020 Series Syntax: Security Network NAS Mode [enable|disable] Parameters: enable : Globally enable 802.1X disable: Globally

User’s Manual of WGSD-10020 Series WGSD-10020HP:/>security network nas state 1 Port Admin State Port State Last Source

User’s Manual of WGSD-10020 Series (default: Show current per-port RADIUS-assigned VLAN enabledness) enable : Enable RADIUS-assigned VLAN either glob

User’s Manual of WGSD-10020 Series Security Network NAS Agetime [<age_time>] Parameters: <age_time>: Time between checks for activitiy o

User’s Manual of WGSD-10020 Series Security Network NAS RADIUS_QoS [global|<port_list>] [enable|disable] Parameters: global : Select the g

User’s Manual of WGSD-10020 Series Security Network NAS Guest_VLAN Description: Set or show either global enabledness and parameters (use the global

User’s Manual of WGSD-10020 Series Syntax: Security Network NAS Authenticate [<port_list>] [now] Parameters: <port_list>: Port list or &

User’s Manual of WGSD-10020 Series Port 1 Backend Server Statistics: Rx Access Challenges: 0 Tx Responses: 0

User’s Manual of WGSD-10020 Series Example: Show ACL action in port 1 WGSD-10020HP:/>security network acl action 1 Port Action Rate Limiter

User’s Manual of WGSD-10020 Series 3.4 Web Management The Managed Switch offers management features that allow users to manage the Managed Switch fro

User’s Manual of WGSD-10020 Series <rate_unit> : IP flags: pps|kbps, default: pss <rate> : Rate in pps (0-100) or kbps

User’s Manual of WGSD-10020 Series <policy> : Policy number (1-8) <tagged> : Tagged of frames: any|enable|disable <vid>

User’s Manual of WGSD-10020 Series Syntax: Security Network ACL Delete <ace_id> Parameters: <ace_id>: ACE ID (1-256) Example: Delete

User’s Manual of WGSD-10020 Series Security Network ACL Status Description: Show ACL status. Syntax: Security Network ACL Status [combined|static|dh

User’s Manual of WGSD-10020 Series DHCP Relay Server : NULL DHCP Relay Information Mode : Disabled DHCP Relay Information Policy : r

User’s Manual of WGSD-10020 Series Default Setting: null Example: Set DHCP relay server in 192.168.0.20 WGSD-10020HP:/>security network dhcp r

User’s Manual of WGSD-10020 Series Syntax: Security Network DHCP Relay Information Policy [replace|keep|drop] Parameters: replace : Replace the orig

User’s Manual of WGSD-10020 Series Security Network DHCP Snooping Configuration Security Network DHCP Snooping Mode Description: Set or show the DH

User’s Manual of WGSD-10020 Series Default Setting: trusted Example: Set untrusted DHCP snooping port mode in port 1 WGSD-10020HP:/>security n

User’s Manual of WGSD-10020 Series Security Network IP Source Guard Configuration Description: Show IP source guard configuration. Syntax: Security

User’s Manual of WGSD-10020 Series 3.5 SNMP-Based Network Management You can use an external SNMP-based application to configure and manage the Man

User’s Manual of WGSD-10020 Series disable : Disable IP Source Guard port (default: Show IP Source Guard port mode) Default Setting: disable Exampl

User’s Manual of WGSD-10020 Series Parameters: <port_list> : Port list or 'all', default: All ports add : Add new port IP s

User’s Manual of WGSD-10020 Series WGSD-10020HP:/>security network arp inspection configuration Security Network ARP Inspection Mode Description

User’s Manual of WGSD-10020 Series Example: Enable the ARP inspection mode of port 1 WGSD-10020HP:/>security network arp inspection port mode

User’s Manual of WGSD-10020 Series Show ARP inspection static and dynamic entries. WGSD-10020HP:/>security network arp inspection status Secur

User’s Manual of WGSD-10020 Series 2 Disabled 1813 3 Disabled

User’s Manual of WGSD-10020 Series Set or show server dead time. Syntax: Security AAA Deadtime [<dead_time>] Parameters: <dead_time>: T

User’s Manual of WGSD-10020 Series WGSD-10020HP:/>security aaa radius 1 enable 192.168.0.20 12345678 1812 Security AAA ACCT_RADIUS Description:

User’s Manual of WGSD-10020 Series (default: Show TACACS+ authentication server configuration) enable : Enable TACACS+ authentication server di

User’s Manual of WGSD-10020 Series 6.8 Spanning Tree Protocol Command STP Configuration Description: Show STP configuration. Syntax: STP Configurati

User’s Manual of WGSD-10020 Series 43 4. WEB CONFIGURATION This section introduces the configuration and functions of the Web-Based management. Abo

User’s Manual of WGSD-10020 Series Example: Set the STP Bridge protocol version. WGSD-10020HP:/> stp version rstp STP Tx Hold Description: Se

User’s Manual of WGSD-10020 Series Example: Set STP maximum hops in 25 WGSD-10020HP:/>stp maxhops 25 STP MaxAge Description: Set or show the

User’s Manual of WGSD-10020 Series Set STP forward delay value in 25 WGSD-10020HP:/>stp fwddelay 25 STP CName Description: Set or Show MSTP co

User’s Manual of WGSD-10020 Series Example: Set edge port BPDU filtering WGSD-10020HP:/>stp bpdufilter enable STP BPDU Guard Description: Set

User’s Manual of WGSD-10020 Series Example: Set STP recovery value in 30 sec. WGSD-10020HP:/>stp recovery 30 STP Status Description: Show STP

User’s Manual of WGSD-10020 Series STP MSTI Priority Description: Set or show the bridge instance priority. Syntax: STP Msti Priority [<msti>]

User’s Manual of WGSD-10020 Series STP MSTI Add Description: Add a VLAN to a MSTI. Syntax: STP Msti Add <msti> <vid> Parameters: <ms

User’s Manual of WGSD-10020 Series STP Port Mode Description: Set or show the STP enabling for a port. Syntax: STP Port Mode [<port_list>] [en

User’s Manual of WGSD-10020 Series WGSD-10020HP:/>stp port edge 1 enable STP Port AutoEdge Description: Set or show the STP autoEdge port parame

User’s Manual of WGSD-10020 Series Default: auto Example: Disable STP P2P function on port1 WGSD-10020HP:/>stp port p2p 1 disable STP Port R

User’s Manual of WGSD-10020 Series  Logging on the switch 1. Use Internet Explorer 7.0 or above Web browser. Enter the factory-default IP address

User’s Manual of WGSD-10020 Series enable : Enable MSTP restricted TCN disable : Disable MSTP restricted TCN Default: disable Example: Eis

User’s Manual of WGSD-10020 Series Parameters: <port_list>: Port list or 'all', default: All ports clear : Clear the selected po

User’s Manual of WGSD-10020 Series Default: auto STP MSTI Port Cost Description: Set or show the STP port instance path cost. Syntax: STP Msti Por

User’s Manual of WGSD-10020 Series <priority> : STP port priority (0/16/32/48/.../224/240) Default: 128 4

User’s Manual of WGSD-10020 Series 6.9 Link Aggregation Command Aggregation Configuration Description: Show link aggregation configuration. Syntax:

User’s Manual of WGSD-10020 Series WGSD-10020HP:/>aggr delete 2 Aggregation Lookup Description: Lookup link aggregation. Syntax: Aggr Lookup [&

User’s Manual of WGSD-10020 Series WGSD-10020HP:/>Aggr mode smac disable 446

User’s Manual of WGSD-10020 Series 6.10 Link Aggregation Control Protocol Command LACP Configuration Description: Show LACP configuration. Syntax: L

User’s Manual of WGSD-10020 Series <port_list>: Port list or 'all', default: All ports enable : Enable LACP protocol disable: Disable

User’s Manual of WGSD-10020 Series LACP Role [<port_list>] [active|passive] Parameters: <port_list>: Port list or 'all', defau

User’s Manual of WGSD-10020 Series Figure 4-1-3 Default main page Now, you can use the Web management interface to continue the switch management o

User’s Manual of WGSD-10020 Series LACP Statistics Description: Show LACP Statistics. Syntax: LACP Statistics [<port_list>] [clear] Parameter

User’s Manual of WGSD-10020 Series 6.11 LLDP Command LLDP Configuration Description: Show LLDP configuration. Syntax: LLDP Configuration [<port_l

User’s Manual of WGSD-10020 Series Parameters: <port_list>: Port list or 'all', default: All ports enable : Enable LLDP reception and

User’s Manual of WGSD-10020 Series System capabilities: Enable Master's IP address: Enable Example: Disable description of the por

User’s Manual of WGSD-10020 Series Example: Set LLDP hold value in 10 WGSD-10020HP:/>lldp hold 10 LLDP Delay Description: Set or show LLDP Tx

User’s Manual of WGSD-10020 Series Example: Set LLDP reinit delay value in 3 WGSD-10020HP:/>lldp reinit 3 LLDP Statistics Description: Show L

User’s Manual of WGSD-10020 Series LLDP Info Description: Show LLDP neighbor device information. Syntax: LLDP Info [<port_list>] Parameters:

User’s Manual of WGSD-10020 Series 6.12 LLDPMED Command LLDPMED Configuration Description: Show LLDP-MED configuration. Syntax: LLDPMED Configuratio

User’s Manual of WGSD-10020 Series Syntax: LLDPMED Civic [country|state|county|city|district|block|street|leading_street_direction|trailing_street_su

User’s Manual of WGSD-10020 Series Syntax: LLDPMED ecs [<ecs_value>] Parameters: <ecs_value>: lldpmed The value for the Emergency Call S

User’s Manual of WGSD-10020 Series 4.1 Main Web Page The SGSW Managed Switch provides a Web-based browser interface for configuring and managing it.

User’s Manual of WGSD-10020 Series visitors with their own IP Telephony handsets and other similar appliances supporting interactive voice services.

User’s Manual of WGSD-10020 Series LLDPMED Coordinates Description: Set or show LLDP-MED Location. Syntax: LLDPMED Coordinates [latitude|longitude|a

User’s Manual of WGSD-10020 Series LLDPMED Fast Description: Set or show LLDP-MED Fast Start Repeat Count. Syntax: LLDPMED Fast [<count>] Par

User’s Manual of WGSD-10020 Series 6.13 EEE Command EEE Configuration Description: Show eee configuration. Syntax: EEE Configuration [<port_list&

User’s Manual of WGSD-10020 Series disable: Disable EEE (default: Show eee mode) Default Setting: Disabled Example: Enable EEE mode for port1~4

User’s Manual of WGSD-10020 Series 6.14 Power over Ethernet Command PoE Configuration Description: Show PoE configuration. Syntax: PoE Configuration

User’s Manual of WGSD-10020 Series Parameters: <port_list>: Port list or 'all', default: All ports enable : Enables PoE disable

User’s Manual of WGSD-10020 Series Example: Set low priority for port1~4 WGSD-10020HP:/>poe priority 1-4 low PoE Mamagement Mode Description

User’s Manual of WGSD-10020 Series Syntax: PoE Alloc_Power [<port_list>] [<alloc_power>] Parameters: <port_list> : Port list or

User’s Manual of WGSD-10020 Series 6.15 Thermal Command Thermal Priority Temperature Description: Set or show the temperature at which the por

User’s Manual of WGSD-10020 Series Figure 4-1-5 Managed Switch Main Functions Menu 47

User’s Manual of WGSD-10020 Series Parameters: <port_list>: Port list or 'all', default: All ports <prio> : Priority (0-3

User’s Manual of WGSD-10020 Series Thermal Configuration Description: Show thermal_protect configuration. Syntax: Thermal configuration 6.16 LED Po

User’s Manual of WGSD-10020 Series LED Power Maintenance Description: Set or show the maintenance settings. Syntax: led_power maintenance [<mai

User’s Manual of WGSD-10020 Series 6.17 Quality of Service Command QoS Configuration Description: Show QoS Configuration. Syntax: QoS Configura

User’s Manual of WGSD-10020 Series QoS Port Classification DPL Description: Set or show the default Drop Precedence Level. Syntax: QoS Port Classifi

User’s Manual of WGSD-10020 Series QoS Port Classification DEI Description: Set or show the default DEI for an untagged frame. Syntax: QoS Port Cla

User’s Manual of WGSD-10020 Series WGSD-10020HP:/>qos Port Classification tag 1-10 enable QoS Port Classification Map Description: Set or show

User’s Manual of WGSD-10020 Series Example: Enable QoS port classification DSCP. WGSD-10020HP:/>qos Port Classification dscp 1-10 enable QoS

User’s Manual of WGSD-10020 Series Default Setting: 500 Example: Set the port policer rate in 1000 WGSD-10020HP:/>qos Port Policer Rate 1-10 1

User’s Manual of WGSD-10020 Series <port_list>: Port list or 'all', default: All ports strict : Strict mode weighted: Weighted mode

User’s Manual of WGSD-10020 Series 4.2 System Use the System menu items to display and configure basic administrative details of the Managed Switch.

User’s Manual of WGSD-10020 Series (default: Show port queue shaper mode) Default Setting: disable Example: Enable port queue shaper for all por

User’s Manual of WGSD-10020 Series Parameters: <port_list> : Port list or 'all', default: All ports <queue_list>: Queue list or

User’s Manual of WGSD-10020 Series QoS Port Shaper Rate Description: Set or show the port shaper rate. Syntax: QoS Port Shaper Rate [<port_list&g

User’s Manual of WGSD-10020 Series WGSD-10020HP:/>qos Port TagRemarking Mode 1-10 mapped QoS Port TagRemarking PCP Description: Set or show the

User’s Manual of WGSD-10020 Series Set the default EDI in 1. WGSD-10020HP:/>qos Port TagRemarking EDI 1-10 1 QoS Port TagRemarking Map Descrip

User’s Manual of WGSD-10020 Series Example: Enable DSCP ingress translation on all port. WGSD-10020HP:/>qos Port DSCP Translation 1-10 enable

User’s Manual of WGSD-10020 Series disable : Disable DSCP egress rewrite enable : Enable DSCP egress rewrite with the value receiv

User’s Manual of WGSD-10020 Series Parameters: <dscp_list> : DSCP (0-63, BE, CS1-CS7, EF or AF11-AF43) list or 'all' (default: Show

User’s Manual of WGSD-10020 Series Default Setting: disable QoS DSCP EgressRemap Description: Set or show DSCP egress remap table. This table is u

User’s Manual of WGSD-10020 Series QoS Storm Multicast Description: Set or show the multicast storm rate limiter. Syntax: QoS Storm Multicast [enab

User’s Manual of WGSD-10020 Series 4.2.1 System Information The System Info page provides information for the current device information. System Info

User’s Manual of WGSD-10020 Series <qce_id_next> : Next QCE ID: "next_id (1-256) or 'last'" <port_list>

User’s Manual of WGSD-10020 Series <qce_id>: QCE ID (1-256), default: Next available ID Default Setting: disable Example: Enable multicast

User’s Manual of WGSD-10020 Series static : Shows the static user configured status voice_vlan : Shows the status by Voice VLAN c

User’s Manual of WGSD-10020 Series 6.18 Mirror Command Mirror Configuration Description: Show mirror configuration. Syntax: Mirror Configuration [&

User’s Manual of WGSD-10020 Series Mirror Mode Description: Set or show the mirror mode. Syntax: Mirror Mode [<port_list>] [enable|disable|rx|

User’s Manual of WGSD-10020 Series 6.19 Configuration Command Configuration Save Description: Save configuration to TFTP server. Syntax: Config Save

User’s Manual of WGSD-10020 Series 6.20 Firmware Command Firmware Load Description: Load new firmware from TFTP server. Syntax: Firmware Load <ip

User’s Manual of WGSD-10020 Series Activate the alternate firmware image.. Syntax: Firmware Swap 497

User’s Manual of WGSD-10020 Series 6.21 UPnP Command UPnP Configuration Description: Show UPnP configuration. Syntax: UPnP Configuration Example:

User’s Manual of WGSD-10020 Series WGSD-10020HP:/>upnp mode enable UPnP TTL Description: Set or show the TTL value of the IP header in SSDP mess

User’s Manual of WGSD-10020 Series 4.5.4 LACP Port Status...

User’s Manual of WGSD-10020 Series 4.2.2 IP Configuration The IP Configuration includes the IP Address, Subnet Mask and Gateway. The Configured colum

User’s Manual of WGSD-10020 Series 6.22 MVR Command MVR Configuration Description: Show the MVR configuration. Syntax: MVR Configuration Example:

User’s Manual of WGSD-10020 Series MVR Group MVR Status Description: Show the MVR status. Syntax: MVR Status MVR Mode Description: Set or show t

User’s Manual of WGSD-10020 Series Parameters: <port_list>: Port list or 'all', default: All ports enable : Enable MVR mode di

User’s Manual of WGSD-10020 Series Syntax: MVR Port Type [<port_list>] [source|receiver] Parameters: <port_list>: Port list or 'all

User’s Manual of WGSD-10020 Series 6.23 Voice VLAN Command Voice VLAN Configuration Description: Show Voice VLAN configuration. Syntax: Voice VLAN C

User’s Manual of WGSD-10020 Series Port Mode Security Discovery Protocol ---- -------- -------- ------------------ 1 Disabled Disabled

User’s Manual of WGSD-10020 Series Voice VLAN ID Description: Set or show Voice VLAN ID. Syntax: Voice VLAN ID [<vid>] Parameters: <vid>

User’s Manual of WGSD-10020 Series Voice VLAN Traffic Class Description: Set or show Voice VLAN ID. Syntax: Voice VLAN Traffic Class [<class>]

User’s Manual of WGSD-10020 Series Voice VLAN OUI Delete Description: Delete Voice VLAN OUI entry. Modify OUI table will restart auto detect OUI proc

User’s Manual of WGSD-10020 Series Example: Lookup Voice VLAN OUI entry. WGSD-10020HP:/>voice vlan oui lookup Voice VLAN Port Mode Descriptio

User’s Manual of WGSD-10020 Series : Click to undo any changes made locally and revert to previously saved values. : Click to undo any changes made l

User’s Manual of WGSD-10020 Series Parameters: <port_list>: Port list or 'all', default: All ports enable : Enable Voice VLAN securit

User’s Manual of WGSD-10020 Series 6.24 IPMC Command IPMC Configuration Description: Show IPMC snooping configuration. Syntax: IPMC Configuration [m

User’s Manual of WGSD-10020 Series IPMC Flooding Description: Set or show the IPMC unregistered addresses flooding operation. Syntax: IPMC Flooding

User’s Manual of WGSD-10020 Series Default Setting: disable Example: Enable IGMP Leave Proxy WGSD-10020HP:/>ipmc leave proxy igmp enable IPM

User’s Manual of WGSD-10020 Series Parameters: mld|igmp: mld : IPMC for IPv6 MLD igmp: IPMC for IPv4 IGMP <vid> : VLAN ID (1-4095) or '

User’s Manual of WGSD-10020 Series IPMC Fastleave Description: Set or show the IPMC snooping fast leave port mode. Syntax: IPMC Fastleave [mld|igmp]

User’s Manual of WGSD-10020 Series (default: Show IPMC Port Throttling) Default Setting: Unlimited Example: Set the max. learn 10 groups for ICM

User’s Manual of WGSD-10020 Series igmp: IPMC for IPv4 IGMP <port_list>: Port list or 'all', default: All ports enable : Enable IP

User’s Manual of WGSD-10020 Series mld|igmp: mld : IPMC for IPv6 MLD igmp: IPMC for IPv4 IGMP <vid> : VLAN ID (1-4095) or 'any',

User’s Manual of WGSD-10020 Series mld : IPMC for IPv6 MLD igmp: IPMC for IPv4 IGMP <vid> : VLAN ID (1-4095) or 'any', default:

User’s Manual of WGSD-10020 Series 16-bit groups of contiguous zeros; but it can only appear once. It also used a following legally IPv4 address. For

User’s Manual of WGSD-10020 Series igmp: IPMC for IPv4 IGMP <vid> : VLAN ID (1-4095) or 'any', default: Show all VLANs ipmc_pa

User’s Manual of WGSD-10020 Series <vid> : VLAN ID (1-4095) or 'any', default: Show all VLANs ipmc_param_llqi: -1 : Def

User’s Manual of WGSD-10020 Series 6.25 VLAN Control List Command VCL MAC-based VLAN Configuration Description: Show VCL MAC-based VLAN configuration

User’s Manual of WGSD-10020 Series Example: Delete 00-11-22-33-44-55-66 in MAC-based VLAN list WGSD-10020HP:/> vcl macvlan del 00-11-22-33-44-5

User’s Manual of WGSD-10020 Series <pid> : PID value (0x0-0xFFFF). If OUI is 00-00-00, valid range of PID is from 0x0600-0xF

User’s Manual of WGSD-10020 Series <pid> : PID value (0x0-0xFFFF). If OUI is 00-00-00, valid range of PID is from 0x0600-0xF

User’s Manual of WGSD-10020 Series <group_id> : Protocol group ID VCL Protocol-based VLAN Configuration Description: Show VCL protocol-based

User’s Manual of WGSD-10020 Series 7. SWITCH OPERATION 7.1 Address Table The Switch is implemented with an address table. This address table composed

User’s Manual of WGSD-10020 Series 7.5 Auto-Negotiation The STP ports on the Switch have built-in "Auto-negotiation". This technology autom

User’s Manual of WGSD-10020 Series 8. POWER OVER ETHERNET OVERVIEW What is PoE? Based on the global standard IEEE 802.3af, PoE is a technology for wi

User’s Manual of WGSD-10020 Series Add / Edit User This page configures a user – add, edit or delete user. Figure 4-2-5 Add / Edit User Configurati

User’s Manual of WGSD-10020 Series Figure 8-1 - Power Supplied over the Spare Pins The data pairs are used. Since Ethernet pairs are transformer cou

User’s Manual of WGSD-10020 Series References: IEEE Std 802.3af-2003 (Amendment to IEEE Std 802.3-2002, including IEEE Std 802.3ae-2002), 2003 Page(s

User’s Manual of WGSD-10020 Series Classification Once a PD is detected, the PSE may optionally perform classification, to determine the maximal powe

User’s Manual of WGSD-10020 Series DC Disconnect DC Disconnect detection involves measurement of current. Naturally, a disconnected PD stops consumin

User’s Manual of WGSD-10020 Series 9. TROUBLE SHOOTING This chapter contains information to help you solve problems. If the Ethernet Switch is not fu

User’s Manual of WGSD-10020 Series 4. If that device works, refer to the next step. 5. If that device does not work, check the AC power  While

User’s Manual of WGSD-10020 Series APPENDEX A A.1 Switch's RJ-45 Pin Assignments 1000Mbps, 1000Base T Contact MDI MDI-X 1 BI_DA+ BI_DB+ 2 BI_D

User’s Manual of WGSD-10020 Series The standard cable, RJ-45 pin assignment The standard RJ-45 receptacle/connector There are 8 wires on a standa

User’s Manual of WGSD-10020 Series APPENDEX B : GLOSSARY A ACE ACE is an acronym for Access Control Entry. It describes access permission associat

User’s Manual of WGSD-10020 Series ranging from 1-1024K packets per seconds. Under "Ports" and "Access Control List" web-pages yo

User’s Manual of WGSD-10020 Series After change the default password, if you forget the password. Please press the “Reset” button in the front pane

User’s Manual of WGSD-10020 Series CCM CCM is an acronym for Continuity Check Message. It is a OAM frame transmitted from a MEP to it's peer M

User’s Manual of WGSD-10020 Series The DHCP option 82 enables a DHCP relay agent to insert specific information into a DHCP request packets when forw

User’s Manual of WGSD-10020 Series EPS EPS is an abbreviation for Ethernet Protection Switching defined in ITU/T G.8031. Ethernet Type Ethernet Typ

User’s Manual of WGSD-10020 Series HTTPS is really just the use of Netscape's Secure Socket Layer (SSL) as a sublayer under its regular HTTP app

User’s Manual of WGSD-10020 Series IP IP is an acronym for Internet Protocol. It is a protocol used for communicating data across a internet networ

User’s Manual of WGSD-10020 Series LLDP-MED LLDP-MED is an extendsion of IEEE 802.1ab and is defined by the telecommunication industry association (T

User’s Manual of WGSD-10020 Series Multicast VLAN Registration (MVR) is a protocol for Layer 2 (IP)-networks that enables multicast-traffic from a so

User’s Manual of WGSD-10020 Series It is a protocol described in ITU-T Y.1731 used to implement carrier ethernet functionality. MEP functionality lik

User’s Manual of WGSD-10020 Series Power Over Ethernet is used to transmit electrical power, to remote devices over standard Ethernet cable. It could

User’s Manual of WGSD-10020 Series There are six QCE frame types: Ethernet Type, VLAN, UDP/TCP Port, DSCP, TOS, and Tag Priority. Frames can be class

User’s Manual of WGSD-10020 Series 4.2.5 Privilege Levels This page provides an overview of the privilege levels. After setup completed, please press

User’s Manual of WGSD-10020 Series RSTP In 1998, the IEEE with document 802.1w introduced an evolution of STP: the Rapid Spanning Tree Protocol, wh

User’s Manual of WGSD-10020 Series SNTP SNTP is an acronym for Simple Network Time Protocol, a network protocol for synchronizing the clocks of com

User’s Manual of WGSD-10020 Series Tag Priority Tag Priority is a 3-bit field storing the priority level for the 802.1Q frame. TCP TCP is an ac

User’s Manual of WGSD-10020 Series TKIP TKIP is an acronym for Temporal Key Integrity Protocol. It used in WPA to replace WEP with a new encryption a

User’s Manual of WGSD-10020 Series VLAN aware switching: This is based on the IEEE 802.1Q standard. All ports are VLAN aware. Ports connected to VLAN

User’s Manual of WGSD-10020 Series 555 'pre-shared key' (PSK) mode, where every allowed computer is given the same passphrase. In PSK mod

EC Declaration of Conformity For the following equipment: *Type of Product: WGSD-10020 *Model Number: 8-Port 10/100/1000Mbps + 2 100/1000X SFP Ma

EC Declaration of Conformity For the following equipment: *Type of Product: WGSD-10020HP *Model Number: 8-Port 10/100/1000Mbps + 2 100/1000X SFP

User’s Manual of WGSD-10020 Series 56 The page includes the following fields: Object Description  Group Name The name identifying the privilege

User’s Manual of WGSD-10020 Series 4.2.6 NTP Configuration Configure NTP on this page. NTP is an acronym for Network Time Protocol, a network protoco

User’s Manual of WGSD-10020 Series 58 4.2.7 UPnP Configure UPnP on this page. UPnP is an acronym for Universal Plug and Play. The goals of UPnP are

User’s Manual of WGSD-10020 Series Buttons : Click to save changes. : Click to undo any changes made locally and revert to previously saved values.

User’s Manual of WGSD-10020 Series 4.8.9 MLD Snooping VLAN Configuration ...

User’s Manual of WGSD-10020 Series The Remote ID sub-option was designed to carry information relating to the remote host end of the circuit. The def

User’s Manual of WGSD-10020 Series 61 contains relay agent information. It will enforce the policy. And it only works under DHCP relay information

User’s Manual of WGSD-10020 Series Circuit ID missing.  Receive Missing Remote ID The packets number that received packets which Remote ID option w

User’s Manual of WGSD-10020 Series 63 4.2.10 CPU Load This page displays the CPU load, using a SVG graph. The load is measured as averaged over the

User’s Manual of WGSD-10020 Series 4.2.11 System Log The switch system log information is provided here. The System Log screen in Figure 4-2-14 appea

User’s Manual of WGSD-10020 Series 4.2.12 Detailed Log The switch system detailed log information is provided here. The Detailed Log screen in Figure

User’s Manual of WGSD-10020 Series 4.2.13 Remote Syslog Configure remote syslog on this page. The Remote Syslog screen in Figure 4-2-16 appears. Fig

User’s Manual of WGSD-10020 Series 4.2.14 LED Power Reduction The LEDs power consumption can be reduced by lowering the LEDs intensity. LEDs intensit

User’s Manual of WGSD-10020 Series 4.2.15 EEE Power Reduction This page allows the user to inspect and configure the current EEE port settings. EEE i

User’s Manual of WGSD-10020 Series be transmitted. Buttons : Click to save changes. : Click to undo any changes made locally and revert to previousl

User’s Manual of WGSD-10020 Series 4.11.4 Network Access Overview ...

User’s Manual of WGSD-10020 Series The page includes the following fields: Object Description  Temperature settings for priority groups The temper

User’s Manual of WGSD-10020 Series Figure 4-2-21 Software successfully loaded notice screen DO NOT Power OFF the Managed Switch until the update

User’s Manual of WGSD-10020 Series  Firmware File Name The name of firmware image. (Maximum length : 24 characters) Buttons : Click to upgrade fir

User’s Manual of WGSD-10020 Series Parameter tags: <mode>, <entry> etc. These tags identify parameters for the specific section, module a

User’s Manual of WGSD-10020 Series 2. Chose the file save path in management workstation. Figure 4-2-25 File save screen 4.2.20 Configuration Upl

User’s Manual of WGSD-10020 Series Figure 4-2-27 Windows file selection menu popup 2. Select on the configuration file then click “”, the bottom o

User’s Manual of WGSD-10020 Series Buttons : Click to reset the configuration to Factory Defaults. : Click to return to the Port State page without r

User’s Manual of WGSD-10020 Series Buttons : Click to reboot the system. : Click to return to the Port State page without reboot the system. You can

User’s Manual of WGSD-10020 Series 4.3 Simple Network Management Protocol 4.3.1 SNMP Overview The Simple Network Management Protocol (SNMP) is an app

User’s Manual of WGSD-10020 Series  SNMPv3 Users Configure SNMPv3 users table on this page.  SNMPv3 Groups Configure SNMPv3 groups table on this

User’s Manual of WGSD-10020 Series 4.15.4 Cable Diagnostics...

User’s Manual of WGSD-10020 Series  Engine ID Indicates the SNMPv3 engine ID. The string must contain an even number between 10 and 64 hexadecimal

User’s Manual of WGSD-10020 Series representing multiple 16-bit groups of contiguous zeros; but it can only appear once. It also used a following leg

User’s Manual of WGSD-10020 Series  System Contact The textual identification of the contact person for this managed node, together with informatio

User’s Manual of WGSD-10020 Series 83 allowed string length is 1 to 32, and the allowed content is the ASCII characters from 33 to 126.  Source I

User’s Manual of WGSD-10020 Series Auth, NoPriv: Authentication and none privacy. Auth, Priv: Authentication and privacy. The value of security l

User’s Manual of WGSD-10020 Series 4.3.4.3 SNMPv3 Groups Configure SNMPv3 groups table on this page. The entry index keys are Security Model and Secu

User’s Manual of WGSD-10020 Series 4.3.4.4 SNMPv3 Views Configure SNMPv3 views table on this page. The entry index keys are View Name and OID Subtree

User’s Manual of WGSD-10020 Series 4.3.4.5 SNMPv3 Access Configure SNMPv3 accesses table on this page. The entry index keys are Group Name, Security

User’s Manual of WGSD-10020 Series Buttons : Click to add a new access entry. : Click to save changes. : Click to undo any changes made locally and r

User’s Manual of WGSD-10020 Series 4.4 Port Management Use the Port Menu to display or configure the Managed Switch's ports. This section has th

User’s Manual of WGSD-10020 Series IP DNS Proxy ...

User’s Manual of WGSD-10020 Series  Configured Link Speed Select any available link speed for the given switch port. Draw the menu bar to select th

User’s Manual of WGSD-10020 Series : Click to refresh the page. Any changes made locally will be undone. erview of general traffic statistics for all

User’s Manual of WGSD-10020 Series 4.4.3 Port Thermal Protection Status This page allows the user to inspect status information related to thermal

User’s Manual of WGSD-10020 Series Figure 4-4-4 Detailed Port Statistics Port 1 page screenshot The page includes the following fields: Receive Tot

User’s Manual of WGSD-10020 Series The number of received and transmitted packets per input and output queue. Receive Error Counters Object Descri

User’s Manual of WGSD-10020 Series 4.4.5 SFP Information You can check the physical or operational status of an SFP module via the SFP Module Informa

User’s Manual of WGSD-10020 Series 4.4.6 Port Mirror Configure port Mirroring on this page. This function provide to monitoring network traffic that

User’s Manual of WGSD-10020 Series Mirror Port Configuration The Port Mirror screen in Figure 4-4-7 appears. Figure 4-4-7 Mirror Configuration page

User’s Manual of WGSD-10020 Series Buttons : Click to save changes. : Click to undo any changes made locally and revert to previously saved values.

User’s Manual of WGSD-10020 Series 4.5 Link Aggregation Port Aggregation optimizes port usage by linking a group of ports together to form a single L