IP address is congured.
4. On “IGS-10020HPT: /IP>” prompt, enter the following command and press
<Enter>asshowninFigure6-2.
IGS-10020HPT:/IP>setup192.168.1.100255.255.255.0192.168.1.11
ThepreviouscommandwouldapplythefollowingsettingsfortheSwitch.
IP: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
VLAN ID: 1
Figure 6-2 Set IP address screen
5.RepeatStep1tocheckiftheIPaddressischanged.
If the IP is successfully congured, the Managed Industrial Switch will apply the
new IP address setting immediately. You can access the Web interface of IGS
ManagedIndustrialSwitchthroughthenewIPaddress.
Ifyouarenotfamiliarwithconsolecommandortherelatedparam-
eter,enter“?”anytimeinconsoletogetthehelpdescription.
Comments to this Manuals