Planet GSD-803PD User Manual download pdf (Page 1)

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Check the following contents of your package:

 Gigabit Ethernet PoE PD Switch x 1

 User's Manual x 1

 Rubber Feet x 4

If any of these are missing or damaged, please contact

your dealer immediately; if possible, retain the carton

including the original packing material, and use them

again to repack the product in case there is a need to

return it to us for repair.

3. Switch Front Panel

Figure 3-1 shows the front panel of GSD-803PD.

GSD-803PD

PWR

1000

1 2 3 4 5 6 7 8 PoE PD

LNK ACT

8-Port Gigabit Ethernet Switch

10/100 LNK ACT

Figure 3-1: GSD-803PD Front Panel

Step 4: Connect your Gigabit Ethernet PoE PD Switch to

network devices.

A. Connect one end of a standard network

cable to the 10/100/1000Mbps RJ-45 ports

on the Back of the Gigabit Ethernet PoE PD

Switch.

B. Connect the other end of the cable to the

network devices such as printer servers,

workstations or routers..

Step 5: Supply power to the Gigabit Ethernet PoE PD

Switch.

A. Connect one end of the RJ-45 UTP cable

from 802.3af PoE PSE devices to the port 8

of Gigabit Ethernet PoE PD Switch.

When the Gigabit Ethernet PoE PD Switch receives

power, the Power LED should remain solid Green.

5. Switch Rear Panel

Figure 5-1 shows the rear panel of GSD-803PD.

5V DC

1357 468

PoE PD

OFF

Figure 5-1: GSD-803PD Rear Panel

Power

Notice

1. The Gigabit Ethernet PoE PD Switch

supports two power systems, DC 5V or

powered from PoE Port # 8 that supports

802.3af PoE 48V DC in-line power.

2. The default package of Gigabit Ethernet

PoE PD Switch does not include DC 5V

power adapter. If you need this DC 5V

power adapter, please contact your local

dealer or distributor for more assistance.

2. Product Features

 Complies with IEEE 802.3 10Base-T, IEEE 802.3u

100Base-TX, IEEE 802.3ab 1000Base-T Ethernet

standard

 8-Port 10/100/1000Mbps Gigabit Ethernet Ports

 Features Store-and-Forward mode with wire-speed

ltering and forwarding rates

 Hardware based 10/100Mbps, half / full duplex and

1000Mbps full duplex mode, ow control and auto-

negotiation

 IEEE 802.3x ow control for full duplex operation and

back-pressure for half duplex operation

 Integrated address look-up engine, support 8K

absolute MAC addresses

 One power on/off button for energy saving

 Automatic address learning and address aging

 9K Jumbo packet size

 Supports Auto MDI/MDI-X function

 Support CSMA/CD protocol

 1-Port support 802.3af PoE DC 48V in-line power at

Port 8

 FCC, CE class A compliant

4. LED Indicators

 System

LED Color Function

PWR Green

Light to indicate that the Switch has

power.

 Per 10/100/1000Base-T RJ-45 Port

LED Color Function

1000

LNK/ACT

Orange

Light to indicate that the Switch

is successfully connecting to

the network at 1000Mbps.

Blink to indicate that the Switch is

actively sending or receiving

data over that port.

10/100

LNK/ACT

Green

Light to indicate that the Switch

is successfully connecting to

the network at 10/100Mbps.

Blink to indicate that the Switch is

actively sending or receiving

data over that port.

7. Product Specications

Product GSD-803PD

Hardware Specications

10/100/1000Base-T

Ports

8 Auto MDI/MDIX ports

Enclosure Metal

LED Indication

System: Power (Green)

Per Port: 1000 LNK/ACT (Orange)

10/100 LNK/ACT (Green)

Dimensions

(W x D x H)

155 mm x 86 mm x 26 mm

Weight 378g

Power

Requirements

802.3af PoE 48V DC in-line power

DC 5V power adapter (Not

include in standard package)

Power Consumption

/ Dissipation

3.3 watts / 11 BTU

Switch Specications

Switch Processing

Scheme

Store-and-Forward

MAC Address Table 8K entries

Flow Control

Back pressure for Half Duplex

IEEE 802.3x Pause Frame for Full

Duplex

6. Installing the Switch

This part describes how to install your Gigabit Ethernet

PoE PD Switch and make connections to it. Please

read the following topics and follow the procedures as

presented.

Note

This Gigabit Ethernet PoE PD Switch does

not need software configuration.

Desktop Installation

To install the Gigabit Ethernet PoE PD Switch on

desktop, simply follow the following steps:

Step 1: Attach the rubber feet to the recessed areas

on the bottom of the Gigabit Ethernet PoE PD

Switch.

Step 2: Place the Gigabit Ethernet PoE PD Switch on

desktop near an 802.3af PoE PSE device.

Step 3: Keep enough ventilation space between the

Gigabit Ethernet PoE PD Switch and the

surrounding objects.

Note

When choosing a location, please keep

in mind the environmental restrictions

discussed in Chapter 7 -- Product

Specifications.

1 2

GSD-803PD 1
8. Customer Support 2

Summary of Contents

Page 1 - GSD-803PD

- 1 -- 2 -- 3 -- 4 -- 5 -- 6 -- 7 -- 8 -1. Package ContentsCheck the following contents of your package: Gigabit Ethernet PoE PD Switch x 1 User&a

Page 2 - 8. Customer Support

- 9 -- 10 -Switch Fabric 16Gbps / non-blockingThroughput(packet per second)11.9Mpps@64BytesNetwork CablesCat. 3, 4, 5, 5e, 6 UTP cable (100 meters, ma

Comments to this Manuals

No comments

Planet GSD-803PD User Manual Page 1

Browse online or download User Manual for Routers Planet GSD-803PD. PLANET GSD-803PD User Manual

Summary of Contents

Comments to this Manuals

Planet GSD-803PD User Manual Page 1

Browse online or download User Manual for Routers Planet GSD-803PD. PLANET GSD-803PD User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Routers Planet GSD-803PD