Planet GSD-1002M User Manual Page 293
- Page / 313
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
User’s Manual of GSD-1002M
Object Description
The destinatio
n IPv6 Address.
IP Address
Number of ech
o requests to send.
Count
Send in
terval for each ICMP packet.
Interval (in sec)
The p
ayload size of the ICMP packet. Values range from 8bytes to 5120bytes.
Size (in bytes)
Displa
y the current ping result.
Ping Results
Buttons
: Click to transmit ICMPv6 packets.
4.13.5 Trace Router
Traceroute function is for testing the gateways through which the data packets travel from the source device to the destination
device, so to check the network accessibility and locate the network failure.
Execution procedure of the Traceroute function consists of: first a data packet with TTL at 1 is sent to the destination address, if
the first hop returns an ICMP error message to inform this packet can not be sent (due to TTL timeout), a data packet with TTL at
2 will be sent. Also the send hop may be a TTL timeout return, but the procedure will carries on till the data packet is sent to its
destination. These procedures is for recording every source address which returned ICMP TTL timeout message, so to describe
a path the IP data packets traveled to reach the destination. The Trace Route Setting screen in Figure 4-13-5 appears.
Figure 4-13-5 Trace Route Setting page screenshot
293
- User’s Manual of GSD-1002M 1
- TABLE OF CONTENTS 3
- 1. INTRODUCTION 10
- 1.2 Product Description 11
- 1.3 How to Use This Manual 13
- 1.4 Product Features 13
- 1.5 Product Specifications 16
- 2. INSTALLATION 19
- 2.1.2 LED Indications 20
- 2.1.3 Switch Rear Panel 21
- 2.2 Installing the Switch 22
- 3. SWITCH MANAGEMENT 26
- 3.3 Web Management 27
- 3.4 Remote Telnet 28
- 4. WEB CONFIGURATION 30
- 4.1 Main Web Page 33
- 4.1.1 Save Button 34
- 4.1.2 Configuration Manager 35
- 4.1.2.1 Saving Configuration 36
- 4.2 System 37
- 4.2.2 IP Configurations 38
- 4.2.3 IPv6 Configuration 40
- 4.2.4 User Configuration 42
- 4.2.5 Time Settings 43
- 4.2.5.2 SNTP Server Settings 45
- 4.2.6 Log Management 46
- 4.2.6.1 Local Log 47
- 4.2.6.2 Local Log 48
- 4.2.6.3 Remote Syslog 49
- 4.2.6.4 Log Message 51
- 4.2.7 SNMP Management 53
- 4.2.7.3 SNMP View 54
- 4.2.7.4 SNMP Access Group 56
- 4.2.7.5 SNMP Community 58
- 4.2.7.6 SNMP User 59
- 4.2.7.9 SNMP Engine ID 64
- 4.3 Port Management 67
- 4.3.2 Port Counters 69
- 4.3.3 Bandwidth Utilization 74
- 4.3.4 Port Mirroring 75
- 4.3.5 Jumbo Frame 77
- 4.3.7 Port Error Disabled 80
- 4.3.8 Protected Ports 80
- 4.3.9 EEE 83
- 4.3.10.1 SFP Module Status 84
- 4.4 Link Aggregation 86
- 4.4.1 LAG Setting 87
- 4.4.2 LAG Managment 88
- 4.4.3 LAG Port Setting 90
- 4.4.4 LACP Setting 92
- 4.4.5 LACP Port Setting 92
- 4.4.6 LAG Status 94
- 4.5 VLAN 97
- 4.5.2 IEEE 802.1Q VLAN 98
- ■ 802.1Q VLAN Tags 99
- Priority CFI VLAN ID 100
- 4.5.3 Management VLAN 101
- 4.5.4 Create VLAN 102
- 4.5.5 Interface Settings 103
- 4.5.6 Port to VLAN 107
- 4.5.7 Port VLAN Membership 108
- 4.5.10 GVRP Setting 111
- 4.5.11 GVRP Port Setting 113
- 4.5.12 GVRP VLAN 115
- 4.5.13 GVRP Statistics 115
- 4.5.14 VLAN setting example: 117
- 4.6 Spanning Tree Protocol 123
- 4.6.2 STP Global Settings 129
- 4.6.3 STP Port Setting 131
- 4.6.4 CIST Instance Setting 134
- 4.6.5 CIST Port Setting 136
- 4.6.7 MST Port Setting 140
- 4.6.8 STP Statistics 142
- 4.7 Multicast 143
- 4.7.2 IGMP Snooping 144
- 4.7.2.1 IGMP Setting 148
- 4.7.2.2 IGMP Querier Setting 150
- 4.7.2.3 IGMP Static Group 151
- 4.7.2.4 IGMP Group Table 152
- 4.7.2.5 IGMP Router Setting 153
- 4.7.2.6 IGMP Router Table 154
- 4.7.2.7 IGMP Forward All 155
- 4.7.3 IGMP Snooping Statics 156
- 4.7.4 MLD Snooping 158
- 4.7.4.2 MLD Static Group 160
- 4.7.4.3 MLD Group Table 161
- 4.7.4.4 MLD Router Setting 161
- 4.7.4.5 MLD Router Table 162
- 4.7.5 MLD Snooping Statics 164
- 4.7.7 Multicast Filter 168
- 4.7.7.2 IGMP Filter Setting 170
- 4.7.7.3 MLD Filter Setting 171
- 4.8 Quality of Service 173
- 4.8.2 General 174
- 4.8.2.3 Queue Settings 176
- 4.8.2.4 CoS Mapping 177
- 4.8.2.5 DSCP Mapping 178
- 4.8.3 QoS Basic Mode 181
- 4.8.3.2 Port Settings 182
- 4.8.4 Rate Limit 183
- 4.8.4.3 Egress Queue 186
- 4.8.5 Voice VLAN 187
- 4.9 Security 192
- 4.9.1.2 802.1X Setting 196
- 4.9.1.3 802.1X Port Setting 197
- 4.9.1.4 Guest VLAN Setting 199
- 4.9.1.5 Authenticed Host 201
- 4.9.2 RADIUS Server 202
- 4.9.3 TACACS+ Server 205
- 4.9.4 AAA 207
- 4.9.4.2 Enable List 209
- 4.9.5 Access 210
- 4.9.5.2 SSH 211
- 4.9.5.3 HTTP 213
- 4.9.5.4 HTTPs 214
- 4.9.6.1 Profile Rules 215
- 4.9.6.2 Access Rules 217
- 4.9.7 DHCP Snooping 218
- 4.9.7.2 Global Setting 219
- 4.9.7.3 VLAN Setting 220
- 4.9.7.4 Port Setting 222
- 4.9.7.5 Statistics 223
- 4.9.7.6 Database Agent 224
- 4.9.7.7 Rate Limit 226
- 4.9.8 Dynamic ARP Inspection 231
- 4.9.8.2 VLAN Setting 232
- 4.9.8.3 Port Setting 233
- 4.9.8.4 Statistics 234
- 4.9.8.5 Rate Limit 235
- 4.9.9 IP Source Guard 236
- 4.9.9.1 Port Settings 237
- 4.9.9.2 Binding Table 238
- 4.9.10 Port Security 240
- 4.9.11 DoS 241
- 4.9.11.1 Global DoS Setting 242
- 4.9.11.2 DoS Port Setting 245
- 4.9.12 Storm Control 246
- 4.9.12.2 Port Setting 247
- 4.10 ACL 249
- 4.10.2 MAC-based ACE 250
- 4.10.3 IPv4-based ACL 253
- 4.10.4 IPv4-based ACE 254
- 4.10.6 IPv6-based ACE 260
- 4.10.5 IPv6-based ACL 260
- 4.10.7 ACL Binding 266
- 4.11 MAC Address Table 267
- 4.11.2 MAC Filtering 268
- 4.11.4 Dynamic Learned 270
- 4.12 LLDP 272
- 4.12.3 LLDP Port Setting 274
- 4.12.4 LLDP Local Device 277
- 4.12.5 LLDP Remove Device 279
- 4.12.6 MED Network Policy 280
- 4.12.7 MED Port Setting 283
- 4.12.8 LLDP Overloading 286
- 4.12.9 LLDP Statistics 287
- 4.13 Diagnostics 289
- 4.13.2 Ping 291
- 4.13.3 Ping Test 291
- 4.13.4 IPv6 Ping Test 292
- 4.13.5 Trace Router 293
- 4.14 RMON 295
- 4.14.2 RMON Event 297
- 4.14.3 RMON Event Log 298
- 4.14.4 RMON Alarm 299
- 4.14.5 RMON History 302
- 4.14.6 RMON History Log 303
- 4.15 Maintenance 304
- 4.15.2 Reboot Switch 305
- 4.15.3 Backup Manager 305
- 4.15.4 Upgrade Manager 306
- 5. SWITCH OPERATION 307
- 5.5 Auto-Negotiation 308
- 6. TROUBLESHOOTING 309
- APPENDIX A 311
- EC Declaration of Conformity 313
Related products and manuals for Routers Planet GSD-1002M
Routers Planet GSD-804P User Manual
(24 pages)
(24 pages)
Routers Planet GSD-805 User Manual
(20 pages)
(20 pages)
Routers Planet GSD-805 User Manual
(20 pages)
(20 pages)
Routers Planet GSD-808HP User Manual
(24 pages)
(24 pages)
Routers Planet GSW-1601 User Manual
(2 pages)
(2 pages)
Routers Planet GSW-1200S User Manual
(40 pages)
(40 pages)
Routers Planet GSW-1600HP User Manual
(24 pages)
(24 pages)
Routers Planet GSW-1601 User Manual
(2 pages)
(2 pages)
Routers Planet GSW-1602SF User Manual
(2 pages)
(2 pages)
Routers Planet LRP-822CS User Manual
(20 pages)
(20 pages)
Routers Planet GSW-4804SF User Manual
(113 pages)
(113 pages)
Routers Planet MGSD-10080F User Manual
(16 pages)
(16 pages)
Routers Planet MGSW-24160F User Manual
(16 pages)
(16 pages)
Routers Planet LRP-822CS User Manual
(346 pages)
(346 pages)
Routers Planet MGSW-28240F User Manual
(438 pages)
(438 pages)
Routers Planet MGSW-28240F User Manual
(643 pages)
(643 pages)
Routers Planet SGSW-24040 User Manual
(567 pages)
(567 pages)
Routers Planet SW-504 User Manual
(2 pages)
(2 pages)
Routers Planet VC-2400MR User Manual
(12 pages)
(12 pages)
© 2020, manymanuals.com. All rights reserved. | 1.519 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals