Planet WGSW-28040 User Manual download pdf (Page 5)

3. Terminal Setup

To congure the system, connect a serial cable to a COM port on a PC or

notebook computer and to serial (console) port of the WGSW Managed Switch. The

console port of the Managed Switch is DCE already, so that you can connect the

console port directly through PC without the need of Null Modem.

PC / Workstation

with

Terminal emulation software

RS-232

Serial Port

115200,8,n,1

WGSW Managed Switch

Note

In the terminal setup steps below, this Quick Installation Guide

use WGSW-28040 as the example. However, the steps for WGSW-

28040P are similar.

A terminal program is required to make the software connection to the WGSW

Managed Switch. Windows’ Hyper Terminal program may be a good choice. The

Hyper Terminal can be accessed from the Start menu.

1. Click START, then Programs, Accessories and then Hyper Terminal.

2. When the following screen appears, make sure that the COM port should be

congured as:

 Baud: 115200

 Data bits: 8

 Parity: None

 Stop bits: 1

 Flow Control: None

1 2 3 4 5 6 7 8 9 10 ... 15 16

No comments

Planet WGSW-28040 User Manual Page 5