Planet VIP-156PE User Manual

1 User’s Manual VoIP Analog Telephone Adapter VIP-156/VIP156PE/VIP-157/VIP-157S

Left / Right Panel of VIP-157S 19BLED Display & Button 1 PC RJ-45 connector, to main tain the existing network structure, connected di

11LED display of VIP-156 / VIP-156PE LED display of VIP-157 / VIP-157S ED Indicators DeL scriptions PWR Power is supplied to the device. STATUS The

22BChapter 2 Preparations & Installation 14BPhysical Installation Requirement This chapter illustrates basic installation of ATA analog Phone Adap

Please locate your PC in the same network segment (192.168.0.x) of ATA. If you’re not familiar with TCP/IP, please refer to related chapter on user’s

14IVR Menu Choice Machine operation Parameter(s) Notes: #111# Set DHCP client None ATA will change to DHCP Client #112xxx*xxx*xxx*xxx# S

15of the ATA. #124# Check Gateway IP Address IVR will announce the current gateway IP address of the ATA. #125# Check Primary DNS Server Setting IV

#145# Forward function disable Disable forwrad funciton #146+Number# enable forward to FXS Port Eanble forward to FXS Port #147+Number# enable forw

33BChapter 3 Network Service Configurations 15BConfiguring and monitoring your ATA from web browser The ATA integrates a web-based graphical user int

VoIP Phone Adatper main page 18

194BChapter 4 5BVoIP Telephone Adapter Configurations 423BStatus Show all the system information, ex: WAN/LAN IP address, System information, IPV6

Copyright Copyright (C) 2012 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed pro

24BPhone Book ATA can set up 140 records of Phone Book. User can dial the Name records to make calls via Phone Book feature. Field Description P

records in total. Name The name of Phone Book records, it only can input numerals character. URL Fill in the outgoing number (Line Number) or IP addre

25BCall Service [Call Forward] This page defines Call Forward function. You can setup the phone number you want to forward in this page. There are

All to PSTN/ No Answer to PSTN (VIP-157): VIP-157 not only support Call Forward to IP calls, but also can forward the calls to PSTN. You can choose th

[Alarm Type] This page defines the Alarm setting in this page. It provides the alarm function, and it can set up the Alarm Time to get the telephon

Volume Settings for VIP-156T/VIP-156PT Beside the above settings, VIP-157 also can set the volume of PSTN. PSTN-Out Volume is to set the PSTN volume

Dial Plan Settings for VIP-156 For VIP-157 have four more items. Field Description Drop Prefix The rule of add or replace code. If setup as Disab

Dial Now rule If the dialing number are match with this field, it will dial out and need not to press the “#” key to end the dialing. It accepts the n

1. If the dialing number is “002+86xxxx”, it will ma tch the rule [002], then system will automatically replace the prefix [002] to the p refix num

Routing Type Deafult is Disable, it define the dialing route, according the [Routing Rule] to define the dialing route is [IP or FXO]. Routing Rule De

3Revision User’s Manual for PLANET VoIP Analog Telephone Adapter: Model: VIP-156 / VIP156PE / VIP-157 / VIP-157S Rev: 5.0 (2012, March) Part No. EM-V

30 Field Description Call Waiting Default is enable. When you are talking with other people, You can choose If you want to hear the notice when th

6BChapter 5 Netowrk 30BNetwork Settings This page defines the LAN setting in this page. 31 Field Description WAN Active The default is Fixed IP,

PPPoE AC Name PPPoE AC name. 31BDDNS Settings This page defines the DDNS setting in this page. You need to have the DDNS account and input the infor

Field Description VLAN Active If setup as On, it could receive VLAN messages. VID (802.1Q/TAG) Dispose VLAN ID is add a Tag header after realize en

UCaution:U VIP-156/VIP-157 VPN can’t use the encryption or compression for VPN connection. 34BIPV6 Settings This page defines the IPV6 setting in

7BChapter 6 HNAT Trans 35BStun Settings This page defines the STUN Enable/Disable and STUN Server IP address in this page. This function can help your

address. PC IP address The IP address of PC port. (In the Birdge mode, the Default IP: 192.168.0.1 PC MAC Address The MAC of PC port Enable DHCP Serv

Field Description Index The serial number. There are total 12 records from Num 1 to 12. Active The activate status. The default is Disable, this r

8BChapter 7 HSIPH Setting 39BService Domain Settings In Service Domain Function you need to input the account and the related informations in this pa

LNote: The starting number can’t be the “0”. For example, if the number is “0xxxx”, because the starting number is “0”, so that the system will ignore

4 TABLE OF CONTENTS UChapter 1 IntroductionU ...

41BSIP Advance Setting This page defines the Hold by RFC, Voice/SIP QoS and other settings in this page. To change these settings please following

Field Description SIP Expire Time To setup the registration interval time. SIP Expire Time Type Default is G eneral; Register interval time setting

42SIP Register Retry Timer If SIP register fail, system will retry interval after this time. SIP session timer T1 Setting the maximum retransmit inte

43Class(IPV6) Use DNS SRV The default is disable, and use DNS SRV mode. Set enable t o use DNS to SRV mode to search the host information. Send Keep

449BChapter 8 Advance Setting 842BStatus Log Display and saving systems running status message data, Press “Get Status Log” can backup the status lo

44BManagement-Advanced Setting This page defines the advanced functions. When you finished the setting, please click the Submit button. 45

46 Field Description ICMP Not Echo This function can disable echo when someone ping this device, it can avoid hacker try to attack the device Anonym

Timeout disconnection the line. PSTN CID forward It must wo rk with [Phon e – Ge neral] [Auto Answer] fun ction or [Phone – Ca ller Service] [Forwa r

auto-configuration. It also can take control of other CPE functions. 48

4910BChapter 9 Other Setting 947BSystem Authority In System Authority it can change admin/System/User login password. 48BFirmware Upgrade This p

5UAuto ConfigU ...

LNote: For technological consideration, we’ve strongly suggested refering to the following upgrade methods for update your device. After firmware l

- Power On (+ Scheduling): The machine will check the new firmware when power on and following the scheduling date and time. - Scheduling: The machi

50BReset to default In Default Setting you can restore the Phone Adapter to factory default in this page. You can just click the Restore button, the

16BAppendix A Voice Communication Samples There are several ways to make calls to desired destination in ATA. In this section, we’ll lead you step by

54BCase 2: (Peer-to-Peer mode) VIP-157S Port 1 to Port 2 communications Supposing one VIP-157S connects to two telephones, just pick up phone 1 and di

55BCase 3: Call Forward Feature_Example 1 In the following samples, we’ll introduce the Call Forward Feature applications. In this example, there ar

56BCase 4: Call Forward Feature_Example 2 In this example, there are one VIP-157 and two VIP-156 register to IPX-300. The VIP-157_A had set Call Forw

57BCase 5: Call Forward Feature_Example 3 In this example, there are one VIP-157 and two VIP-156 register to IPX-300. The VIP-157_A had set Call Forw

58BCase 6: Call Forward Feature_Example 4 In this example, there are three VIP-156 and connect with Peer to Peer mode. VIP-156_A had set Call Forward

Machine configuration on the VIP-157: STEP 1: Please log in VIP-157_A via web browser, browse to the Phone Settings menu and select the Call service

10BChapter 1 1BIntroduction 11BOverview Based on years of VoIP manufacturing experiences, PLANET Technology VoIP total solutions are known for advanc

6. The Phone Number 11112222 will ring up then it pick up the telephone and communication with the VIP-156_C 60BCase 8: Auto Answer Feature_PSTN to

Test the scenario: 1. The Phone Number 11112222 pick up the telephone 2. Dial the PSTN Phone Number 33334444(VIP-157_A) 3. VIP-157_A will ring

62 17BAppendix B The method of operation guide In this section, we’ll introduce the steps of how to set up some call features of the ATA. Please foll

63SIP accounts incoming call, and it can switch to any one SIP accounts for making calls through input the switch code. URealm switch code: 1*: Re

6418BAppendix C VIP-156/VIP-156PE/VIP-157/VIP-157S Specifications Product SIP Analog Telephone Adapter Model VIP-156 VIP-156PE VIP-157 VIP-157S Har

EC Declaration of Conformity For the following equipment: *Type of Product : SIP Telephone Adapter *Model Number : VIP-156 * Produced by:

EC Declaration of Conformity For the following equipment: *Type of Product : PoE SIP Telephone Adapter *Model Number : VIP-156PE * Produce

EC Declaration of Conformity For the following equipment: *Type of Product : VoIP Analog Telephone Adapter (1*FXS + 1*FXO) *Model Number :

EC Declaration of Conformity For the following equipment: *Type of Product : VoIP Analog Telephone Adapter (2*FXS) *Model Number : VIP-157S

• Voice processing: Voice Active Detection, DTMF detection/ generation, G.168 echo cancellation (16mSec.), Comfort noise generation (CNG) • In band,

Left / Right Panel of VIP-156 Front Panel of VIP-156PE Left / Right Panel of VIP-156PE 8

Front Panel of VIP-157 Left / Right Panel of VIP-157 Front Panel of VIP-157S 9