Planet VIP-255PT User Manual

SIP PoE IP Phone VIP-255PT User’s manual Version 3.0 1

Account register successful Missed calls Call in Call out Input method: all letters and numbers Input method: numbers Input method: letters in

Chapter 2 Preparations & Installation Physical Installation VIP-255PT: 802.3af PoE SIP IP Phone (2 x RJ-45, 1 x PoE for LAN interface) Step 1: Co

Figure 2-3 power adapter installations Step 3: Adjust the stand angle. Figure 2-4 stand angle adjustment 12Power Adapt

Administration Interface The IP Phone provides GUI (Web based, Graphical User Interface) for machine management and administration. Key pad administra

Chapter 3 Network Service Configurations Configuring and monitoring your IP Phone from web browser The IP Phone integrates a web-based graphical user

Figure 3-2 main page Network configuration via web configuration interface Execute your web browser, and insert the IP address (default: 192.168.0.1

Subnet Mask LAN mask of IP Phone Default: 255.255.255.0 Default Gateway Gateway of IP Phone Default: 192.168.0.254 After confirming the

After confirming the modification you’ve done, Please click on the Confirm button to apply settings and the machine will be reboot to make the setting

Chapter 4 VoIP IP Phone Configurations General Settings Phone Status You can view the status of your phone using the Phone interface or the Web inter

1. Press Menu->Settings->Basic Settings->Time & Date. 2. If SNTP Settings is chosen, the phone will automatically get the time from the

Copyright Copyright (C) 2010 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed pro

instruction above for the parameters’ detail. To change the Daylight Saving Time via the Phone interface: 1. Press Menu->Settings->Basic Sett

Keypad Lock You can lock the keypad of your phone when you are temporarily not using it. This function helps you to protect your phone from unauthoriz

instruction above for the parameters’ detail. Audio Settings Volume You can adjust the volume of handset/speaker/Ring. To adjust the ring vol

Ring Tone You can adjust the type and volume of the ring tone. To adjust the Ring Style via Phone interface: 1. Press Menu->Settings–>Basic Se

Contact Managemens Edit/Add/Delete Contact You can store a large number of contacts in your phone's directory. You can add, edit, delete, dial,

3. Press the 2aB hot key to switch the input mode. 4. After the edition, press the Save hot key to save the change. Then you can go to Contact lis

2. Browse the specific contact list file in .XML format, and then click Import button. The imported contact lists will be shown in the directory.

the latest information released on the server in time, and display on the terminal for the user. To set the Remote phone book via Web interface: 1. C

2. Press the Switch hot key to choose a button that you want to use as the send key: “#”, “*”, or disable this option. 3. Press the Save hot key to

4. If you want to realize this function by server, please choose and enter the Call On Code and Call Off Code. When you choose to enable the anonymo

3WEEE as unsorted municipal waste and have to collect such WEEE separately. Trademarks The PLANET logo is a trademark of PLANET Technology. This do

Auto Redial Auto redial is a telephone feature that redials a busy number a fixed number of times before giving up. To set auto redial via the

4. Press the navigation keys to choose and set the redial times. 5. Press the Save hot key to save the changes. To set auto redial via the Web

Missed call log Defines whether to save the missed calls to the call history record. This function can only be set via the Web interface: 1. Choose Ac

2. Enter the desired Prefix and Replace. 3. Click Add/Del button to save the changes. 4. You can also delete a specific one from the dial plan li

2. Enter the desired “x/.”. 3. Click Add button to save the changes. 4. You can also delete a specific one from the dial plan list by clicking De

the list, click Del button to delete the record. 3. You can not dial out the number from your IP phone unless it is removed from the Forbidden List

Chapter 5 Using the Advanced Phone Functions Account Setting Please refer to the previous part “Configuration and Registration” for the basic Account

Field Name Description As an Bridge If you select the Bridge mode, then the two Fast Ethernet ports will be transparent. As an Router If you sele

Local RTP Port Define the port for voice transmission. IP address User could configure the PC port IP address. WebServer Users can choose the WebSer

some other phone settings by the Phone interface. Administrator/User Password Administrator mode grants unlimited access to the phone configuratio

4 TABLE OF CONTENTS Chapter 1 Introduction... 6 Overview...

not functioning anymore. To maintain the configuration of the phone, you need your system administrator or service provider’s advice. To reset to f

2. Click Upgrade button to update the new firmware. 3. Please do not power off during the updating. To update the firmware automatically via Web

Set AES Key via phone interface: 1. Go to Menu->Settings->Advanced Settings->Set AES Key. 2. Enter the Common AES and the MAC-oriente

PCAP Trace Export The PCAP Trace used to record the date transport of your IP phone. If there are any errors happened in your phone, you can export th

2. Set the following parameters shown in the table. Field Name Description Echo canceller Defines whether to enable the echo canceller. VAD Voi

2. Internal Ringer Text: To set group name. For example, family. 3. Internal Ringer File: To choose a special ring tone for the group. 4. Click th

Appendix A Voice communications There are several ways to make calls to desired destination in IP Phone. In this section, we’ll lead you step by step

STEP 3: Repeat the same configuration steps on VIP-255PT-B, and check the machine registration status, make sure the registrations are completed. STE

Figure 30. Web page of VIP-255PT STEP 2: After set up completed, it will show the always forward icon on the LCD screen. Test the scenario: VI

49Appendix B The method of operation guide In this section, we’ll introduce the features method of operation, and lead you step by step to establish

5Key as Send ...27 Hot Line...

50Appendix C Frequently Asked Questions List Q1 : I can not register to the server？ A1 : 1. Check the IP address. If you set your LAN port in DHCP mo

51Q9 : How to update the firmware? A9 : 1. Update the firmware on the webpage Upgrade-> Select and Upgrade Firmware. 2. Select the correct file yo

52 Appendix D VIP-255PT Specifications Product SIP PoE IP Phone Model VIP-255PT Hardware LAN 1 x 10/100Mbps RJ-45 port Power Over Ethernet 802.3

PLANET TECHNOLOGY CORPORATION e-mail: [email protected] http://www.planet.com.tw 11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C. T

Chapter 1 Introduction Overview Meeting the next-generation Internet telephony service demands, the PLANET VIP-255PT is an ideal solution for office

• Supports standard encryption and authentication (MD5 and MD5-sess) • The phone can be configured via keypad, web browser or remote. • Firmware ca

LAN RJ-45 connector, for Internet access, connected directly to Switch/Hub through straight CAT-5 cable. The LAN interface also can be connected with

if the phone is not powered. Hot Key The screen will display labels for these keys, to identify their functions. Navigation Keys Use the navigation ke