Planet WNAP-1260 User Manual download pdf (Page 114)

User’s Manual of WNAP-1260

-106-

8.10.4. SNTP

Choose Management Function > SNTP and the SNTP page is displayed.

Figure 8-50

SNTP refers to Simple Network Time Protocol. In this page, you can set time information of your

router. It is strongly recommended to set the correct time on the router first. This ensures proper

functioning of log, site blocking, and schedule because their time settings are based on time

information in this page.

Object Description

 Automatically

synchronize with

Internet time

servers:

If selected automatic synchronization with the network time server is

enabled

 First NTP time

server:

Enter the IP address of the primary NTP server. The NTP server is a

network time server that is used to synchronize the time of

computers on the Internet. When you set the first NTP time server,

the router obtains GMT time from the specified NTP server with

priority after it is connected to the Internet

 Second NTP time

server:

Enter the IP address of the secondary NTP server if available

 Current Router

Time:

Display the current system time of the router

 Time Zone:

Select the time zone where you are located.

 Enable Daylight

Saving:

Enable or disable daylight saving time (DST).

 Daylight Saving

Offset:

Select a proper offset. If it is set to +1:00, 10:00 in the morning in

standard time becomes 11:00 in the morning in DST

 Daylight Saving

Dates:

Set the starting time and ending time of DST

After finishing settings, click Apply to save the settings.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 153 154

No comments

Planet WNAP-1260 User Manual Page 114