Planet WDAP-C7200AC User Manual download pdf (Page 1)

Note

– 1 – – 2 –

– 3 – – 4 –

– 4 –

1. Package Contents

3. Hardware Installation

2. Physical Introduction

– 7 – – 8 –

4. Wired Network Configuration (Windows 7) 5. Entering into the Web Management

– 5 – – 6 –

Hardware Description

WDAP-C7200AC Quick Guide CD-ROM

Mounting Kit

The above steps introduce simple installations and configurations

for the WDAP-C7200AC. For further configurations of LAN,

Wireless, Access Control, etc, please refer to the user’s manual in

the CD. If you have further questions, please contact the local

dealer or distributor where you purchased this product.

2010-E11010-000

Thank you for choosing PLANET WDAP-C7200AC. Before installing

the AP, please verify the contents inside the package box.

The WDAP-C7200AC should contain the following items in the

package:

If there is any item missing or damaged, please

contact the seller immediately.

STEP 1: Drills the outlet hole indicated on the mounting label

and sticks the given mounting label to the installation

location to let the Ethernet cable penetrate the outlet

hole. Then, drills the mounting holes as indicated on

the label.

STEP 4: Load the device into the mounting bracket, and be

sure the device is mated with two fixed screws. Then,

rotate the device clockwise to lock it in position.

6. Wireless Network Connection

Further Information:

STEP 1: Right-click on the network icon displayed in the

system tray.

STEP 2: Take the mounting bracket, put it on the target place

by aligning the holes and fix it with the supplied

screws.

STEP 3: Plug the RJ-45 Ethernet cable into the PoE port of the

WDAP-C7200AC.

A computer with wired Ethernet connection is required for the

first-time configuration of the Wireless AP.

1. Click “Start” button located at the lower-left corner of your

computer.

2. Click “Control Panel”.

3. Double click “Network and Sharing Center” icon.

4. Click “Change Adapter Settings”.

5. Double click “Local Area Connection”.

6. Select “Internet Protocol Version 4(TCP/IPv4)” and

click “Properties”.

7. Select “Use the following IP address” and then click

“OK” button twice to save the configuration. For example,

as the default IP address of the WDAP-C7200AC is

192.168.1.253 and the router is 192.168.1.254, you may

choose from 192.168.1.1 to 192.168.1.252.

Default IP Address: 192.168.1.253

Default Username: admin

Default Password: admin

Default SSID (2.4GHz): Planet AP 2.4G

Default SSID (5GHz): Planet AP 5G

STEP 3: Enter the encryption key of the WDAP-C7200AC if

necessary.

STEP 1: The Web management allows you to access and

manage the Wireless AP easily. Launch the Web

browser and enter the default IP address

http://192.168.1.253.

WDAP-C7200AC

Quick Installation Guide

1200Mbps 802.11ac Dual Band Ceiling

Mount Wireless Access Point

Mounting Bracket

For security reasons, it is recommended to change the

password at the first login and memorize it.

STEP 2: When the login window pops up, please enter the

User Name and Password. The default User Name

and Password are both “admin”.

Then click OK button to continue.

STEP 2: Highlight the wireless network (SSID) to connect and

click [Connect] button.

You have already finished the configuration of the

WDAP-C7200AC. Now you can use your iPhone, iPad, laptop,

and any other Wi-Fi device to connect with it wirelessly and

start surfing the internet.

STEP 4: Once the basic configuration of the WDAP-C7200AC

is done, click “Finished” button to make the change

take effect.

STEP 3: After you enter into the Web User Interface, go to

Setup Wizard to configure your wireless network.

For security reasons, strongly recommended to

configure the Encryption Method and Passphrase of

your wireless network.

x 3x 3

Reset: Press and hold the button for more than 10 seconds to

reset to the factory default setting.

Power LED

Reset Button

PoE LAN

STEP 5: Plug the other end of the Ethernet cable into the PoE

switch.

1 2

Mount Wireless Access Point 1

Summary of Contents

Page 1 - Mount Wireless Access Point

Note– 1 – – 2 –– 3 – – 4 –– 4 –1. Package Contents3. Hardware Installation2. Physical Introduction– 7 – – 8 –4. Wired Network Configuration (Windows 7

Page 2

Note– 1 – – 2 –– 3 – – 4 –– 4 –1. Package Contents3. Hardware Installation2. Physical Introduction– 7 – – 8 –4. Wired Network Configuration (Windows 7

Planet WDAP-C7200AC User Manual Page 1

Browse online or download User Manual for Routers Planet WDAP-C7200AC. PLANET WDAP-C7200AC User Manual

Summary of Contents

More documents for Routers Planet WDAP-C7200AC

Comments to this Manuals

Planet WDAP-C7200AC User Manual Page 1

Browse online or download User Manual for Routers Planet WDAP-C7200AC. PLANET WDAP-C7200AC User Manual

Summary of Contents

More documents for Routers Planet WDAP-C7200AC

Comments to this Manuals

Related products and manuals for Routers Planet WDAP-C7200AC