Planet WDAP-C7200AC User Manual download pdf (Page 42)

User Manual of WDAP-C7200AC

-33-

The device supports up to four multiple Service Set Identifiers. You can back to the Basic Settings page to

set the Primary SSID. The SSID’s factory default setting is Planet 5G VAP1~4 (Multiple-SSID 1~4). The

SSID can be easily changed to connect to an existing wireless network or to establish a new wireless

network. When the information for the new SSID is finished, click the Apply Changes button to let your

changes take effect.

Figure 5-20 5GHz Multiple-SSID

Once you have applied and saved those settings, you can then go to the “WLAN1 (5GHz) → Security”

page on the AP to set up security settings for each of the SSIDs.

 Universal Repeater

This mode allows the AP with its own BSS to relay data to a root AP to which it is associated with WDS

disabled. The wireless repeater relays signal between its stations and the root AP for greater wireless

range.

1. Example of how to configure Universal Repeater Mode. Please take the following steps:

To configure each wireless parameter, please go to the “WLAN1 (5GHz) → Basic Settings” page.

Step 1. Configure wireless mode to “AP” and then check “Enable Universal Repeater Mode (Acting as AP

2.4G

Clients

Smart Phone

Switch

WDAP-C7200AC

Universal Repeater Mode

Internet

g/n

a/n/ac

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 128 129

No comments

Planet WDAP-C7200AC User Manual Page 42