Planet ADE-3400 User Manual download pdf (Page 33)

Field Description

idle timeout time. Within the preset minutes, if the router

does not detect the flow of the user continuously , the

router automatically disconnects the PPPoE connection.

Bridge

You can select Bridged Ethernet, Bridged PPPoE, or

Disable Bridge.

AC-Name The accessed equipment type.

Service-Name The service name.

802.1q

You can select Disable or Enable. After enable it, you

need to enter the VLAN ID. T he value ranges from 0 to

4095.

Apply Changes Click it to save the settings of this page temporarily.

Return Click it to return to the Channel Configuration page.

Undo Click it to refresh this page.

3.4.2.2 ATM Setting

Click ATM Setting in the left pane, the page shown in the following figure appears. In this

page, you can configure the p arameters of the ATM, including QoS, PCR, CDVT , SCR,

and MBS.

The following table describes the parameters of this page:

Field Description

VPI The virtual path identifier of the ATM PVC.

VCI The virtual channel identifier of the ATM PVC.

QoS

The QoS category of the PVC. Y ou can choose UBR, CBR,

rt-VBR, or nrt-VBR.

PCR

Peak cell rate (PCR) is the maxi mum rate at which cells can be

transmitted along a c onnection in the A TM network. It s value

ranges from 1 to 65535.

CDVT

Cell delay variation tolerance (CDVT) is the amount of delay

permitted between ATM cells (in microseconds). Its value ranges

from 0 to 4294967295.

SCR

Subtain cell rate (SCR) is the maximum rate that traffic can pass

over a PVC without the risk of cell loss. Its value ranges from 0 to

65535.

MBS

Maximum burst size (MBS) is the maximum number of cells that

can be transmitted at the PCR. Its value ranges from 0 to 65535.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 60 61

No comments

Planet ADE-3400 User Manual Page 33