Planet ADE-3400 User Manual download pdf (Page 30)

The following table describes the parameters and buttons of this page:

Field Description

DHCP Mode

If set to DHCP Re lay, the router act s a

surrogate DHCP Ser ver and relays the DHCP

requests and responses between the remote

server and the client.

Relay Server

Enter the DHCP ser ver address provided by

your ISP.

Apply Changes Click it to save the settings of this page.

Undo Click it to refresh this page.

3.4.1.3 DHCP Static IP

Click DHCP Static IP in the left pane, the page shown in the following figure appears. You

can assign the IP addresses on the LAN to the specific individual PCs based on their

MAC address.

The following table describes the parameters and buttons of this page:

Field Description

IP Address

Enter the specified IP address in the IP pool range,

which is assigned to the host.

Mac Address Enter the MAC address of a host on the LAN.

Add

After entering the IP address and MAC address, click it.

A row will be added in the DHCP Static IP Table.

Delete Selected

Select a ro w in the DHCP Static IP Table, then click it,

this row is deleted.

Reset Click it to reset those parameter.

DHCP Static IP Table

It shows the assigned IP address based on the MAC

address.

3.4.2 WAN

Choose Network > WAN. The WAN page that is displayed contains WAN, ATM Setting,

and ADSL Setting.

3.4.2.1 WAN

Click WAN in the left pane, the page shown in the following figure appears.

In this page, you can configure WAN interface of your router.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 60 61

No comments

Planet ADE-3400 User Manual Page 30