Planet WL-8310 User Manual

1 IEEE802.11g Wireless PCI Card WL-8310 User Manual

6Chapter 2 Installation Procedure Before you proceed with the installation, it is necessary that you have enough information about the Wireless PCI C

7 3. You can click “Browse” to specify the Destination Folder that you want to install the configuration utility. Or you can keep the default settin

85. Click “Finish” to complete the installation procedures. 6. The system will prompt you to restart the computer now or later. Select desired opt

9 3. The system will search for the proper driver. Then a dialog box will pop up as below. Click “Continue Anyway” to continue. 4. Click “Finish”

10

11 Chapter 3 Configuration Utility The Configuration Utility is a powerful application that helps you to configure the WL-8310 and monitor the status

12 3.1 Link Info This screen contains current link information of WL-8310. Status: Shows the BSSID associated with, which can be used to identify th

133.2 Configuration In this screen, you can configure the wireless settings of WL-8310. After configuration, please press ”Apply” to save settings o

14(as described in IEEE 802.11b). At the receiver, the Preamble and header are processed to aid in demodulation and delivery of the PSDU. The Short P

15them for WEP to operate. Ø Network Key: You can define the WEP (Wired Equivalent Privacy) Key values by yourself. Ø Key Length – Please select

2Copyright Copyright  2003 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed,

163.4 Site Survey This screen shows the APs or Adapters which available fro WL-8310 to connect. If you configure the SSID of WL-8310 as “Any”, it wi

17

18Appendix This section provides some technology Q&A. Read the description below to know more about the wireless network. ü What is the differen

19changed or dynamically assigned by the network, the MAC address of a networking device is permanent. ü What is WEP? Wired Equivalent Privacy (WEP)

20words, more bandwidth is consumed than in the case of narrowband transmission, but the trade off produces a signal that is, in effect, louder and t

3the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the Following two conditions: ( 1 ) This device may not c

4Manual Contents Chapter 1 Introduction 1 1.1 Features...

1Chapter 1 Introduction IEEE 802.11g uses 2.4GHz unlicensed ISM band, the same as IEEE 802.11b; but it provides almost 5 times data rate than traditi

2wireless and wired LAN is called an Infrastructure configuration. A group of WL-8310 PC users and an Access Point compose a Basic Service Set (BSS).

3 1.2.3 General Application WL-8310 offers a fast, reliable, cost-effective solution for wireless client access to the network in applications

41.3 Specification Product IEEE802.11g Wireless PCI Card Model Name WL-8310 Attachment Interface PCI V2.2 LED Indicators Steady for power on; blink f

51.5 Minimum System Requirements Before installation, please check the following requirements with your equipment. • Operating System: Windows 98/Me