Planet ICA-350 Installation Guide Page 34

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 33
34
Note
1. If no IP address is assigned within 30 seconds,
the networked device will automatically assign
192.168.0.20. User may now open your web browser,
and key in http://192.168.0.20 in the address bar
of you web browser to logon IP Camera’s web config-
uration page.
2. Power Line Frequency
- If you found the video image is flash, you may
need to choose 50 or 60 Hz frequency (depends on
different country).
- World wide power line frequency table is inside
user’s manual, Appendix.
After connected to networked device, the device will prompt for
User name and Password. For the rst time, please enter: admin as
username and no password to continue Web Management.
If difculty is met, please refer to the following steps to establish the
connection:
- The networked device must be installed and powered ON.
If the networked devices default IP Address (192.168.0.20) is already
used by another device, the other device must be turned OFF until the
device is allocated a new IP Address during conguration.
Page view 33
1 2 ... 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments