Managed Ethernet SwitchesWSD-800 / WGSD-910 / WGSD-1022CWSW-2401A / WGSW-2840 / WGSW-5240Quick Installation Guide
Table of Contents1. Package Content ... 32. Terminal Setup ...
31. Package ContentThank you for purchasing the Planet Layer 2 Managed Switch. In the following section, the term “Switch” means the Layer
42. Terminal SetupTo congure the system, connect a serial cable to a COM port on a PC or notebook computer and to serial (console) port of the Switch
53. Logon to the ConsoleOnce the hardware connection and the terminal program are ready, power on the Switch. The terminal program will d
6The prompt then change to the “switch\enable>”, please enter “?” to list the commands it offers. As show in Figure 3-3.Figure 3-3 Lis
74. Congure IP addressThe default IP address of the Switch is “192.168.0.100”. If you want to change the IP address, for example, c
85. Start Web ManagementThe Switch can be fully managed by console. It also provides a convenient Web management interface for remote
Comments to this Manuals