Planet VRT-402N User Manual download pdf (Page 3)

1. Before Starting Up

This is a step-by-step instruction on how to start up the VRT-402N and get

connected to the Internet.

1) Setup your network as shown in the setup diagram below.

WAN PWR

WAN

PWR

2 3

Internet

NB PC

ADSL

LAN

Power Adapter

5V 2A

2) Then, you need to setup your LAN PC clients so that it can obtain an IP address

automatically. By default the VRT-402N’s DHCP server is enabled so that you can

obtain an IP address automatically.

Note

Please make sure that the VRT-402N’s DHCP server is the only

DHCP server available on your LAN. If there is another DHCP on

your network, then you’ll need to switch one of the DHCP servers

off.

3) Once your PC has obtained an IP address from your router, enter the default IP

address 192.168.0.1 into your PC’s web browser and press <enter>. That is,

key in http://192.168.0.1 to the browser’s address eld.

) The login screen below will appear. Enter the “User Name” and “Password” and

then click <OK> to login.

1 2 3 4 5 6 7 8

No comments

Planet VRT-402N User Manual Page 3