Planet FSD-1605 User Manual download pdf (Page 8)

Power Notice:

1. The device is a power-required device, it means, it will not work till it is

powered. If your networks should active all the time, please consider

using UPS (Uninterrupted Power Supply) for your device. It will prevent

you from network data loss or network downtime.

2. In some area, installing a surge suppression device may also help to

protect your Switch from being damaged by unregulated surge or current

to the Switch or the power adapter.

2.2 Installing the Switch

This part describes how to install your Fast Ethernet Switch and make

connections to it. Please read the following topics and perform the procedures

in the order being presented.

Note: This Fast Ethernet Switch does not need software configuration.

2.2.1 Desktop Installation

To install the Fast Ethernet Switch on desktop, simply follow the next steps:

Step1: Attach the rubber feet to the recessed areas on the bottom of the Fast

Ethernet Switch, as shown in Figure 2-4.

Figure 2-4 Attaching the rubber feet to the Fast Ethernet Switch

Step2: Place the Fast Ethernet Switch on desktop near an AC power

source.

Step3: Keep enough ventilation space between the Fast Ethernet Switch and

the surrounding objects.

Note: When choosing a location, please keep in mind the environmental

restrictions discussed in Chapter 1, Section 1.4 Product Specication.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

No comments

Planet FSD-1605 User Manual Page 8